English English 3 4
MOUNTING INSTRUCTIONS
2. Select the spacer or combination of spacers that fit your preferences, from the
mounting kit.
3. Fix the unit using the screws from the mounting kit.
MAINS (AC) OPERATION
Before switching on make sure that the voltage of your electricity supply is the same
as that indicated on the rating plate.
For your own safety read the following instructions carefully before attempting to
connect this unit to the mains.
This unit is designed to operate on AC 230V 50Hz / DC 6V current only. Connecting
it to other power sources may damage the unit.
To prevent electric shock disconnect from the mains before removing cover. No user
serviceable parts inside. Refer servicing to qualified service personnel.
SETTING THE TIME
Note: Please make sure that all connections have been ready.
1. In standby mode, press and hold the PROG BUTTON (10) button, the Hour di-
gits will flash. Press SKIP BACK/TUNING- BUTTON (12)/SKIP UP/TUNING+
BUTTON (14) on unit or (4)/(14) on remote repeatedly to set the clock to the
correct Hour, press the PROG BUTTON (10) button to confirm.
2. Then the minute digits will flash, press SKIP BACK/TUNING- BUTTON (12)/
SKIP UP/TUNING+ BUTTON (14) on unit or (4)/(14) on remote repeatedly to set
the clock to the correct Minutes, press the PROG BUTTON (10) button again to
confirm.
3. The display will show the RTC 12 hours or the RTC 24 hours version. Press
SKIP BACK/TUNING- BUTTON (12)/SKIP UP/TUNING+ BUTTON (14) button
on unit or (4)/(14) on remote to choose for the 12 or 24 hour version. Press the
PROG BUTTON (10) button to confirm.
WARNINGS
The exclamation point within the triangle is a warning sign alerting
the user of important instructions accompanying the product.
The lightening flash with arrowhead symbol within the triangle is a
warning sign alerting the user of “dangerous voltage” inside the unit.
To reduce the risk of electric shock, do not remove the cover. No
user serviceable parts inside the unit. Refer all servicing to quali-
fied personnel.
This unit operates on 230V ~ 50Hz. If the unit is not used for a
long period of time, remove the plug from the AC mains.
Ensure all connections are properly made before operating the
unit.
This unit must not be exposed to moisture or rain.
This unit should be positioned so that it is properly ventilated. A-
void placing it, for example, close to curtains, on the carpet or in a
built-in installation such as a bookcase.
Do not expose this unit to direct sunlight or heat radiating sources.
1. Drill 3 x 6,5" diameter holes through the underside of the cabinet bottom
shelf using the three points marked on the template.
