592183
4
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
English English
3 4
ora
the DC 4.5 V INPUT socket (13) located on the back of the unit.
2. Connect the AC/DC adaptor into a 230V ~ 50Hz AC power
outlet.
Notes:
Use only the supplied AC/DC adaptor. Using other types of
adaptor may damage the unit.
Make sure that the AC/DC adaptor matches with your household
voltage before connecting it into the wall outlet.
Do not touch the AC/DC adaptor with wet hands.
Battery Back-up Power Failure Protection
This radio has a battery back up circuit that will keep the correct
time and alarm settings in the event of a temporary power
interruption.
Install 2 x 1,5-volt battery (type UM3), not included, into the
battery compartment located on the bottom of the unit.
Note:We recommend an alkaline battery for longer usable life.
Change the battery every 9 to 12 months for best result and avoid
possible battery leakage.
If power is temporarily interrupted the display will blink and the
radio will not play. However, the battery back-up circuit will
continue to maintain the clock and alarm settings. When power is
restored the clock will display the correct time and alarm settings,
and no adjustment is necessary.
SETTING THE CORRECT TIME
NOTE: The Clocki can be set only if the unit is in Stand-By mode (radio
OFF).
1. Press 2 seconds the TIME CLOCK SET Button (11) until the display
blink.
2. Press the TUN/TIME+ (4) button to advance hour
3. Press the TUN/TIME+ (3) button to advance MINUTE until the
correct time is displayed.
4. Press the TIME SET Button (11) to complete the setting operation.
SETTING THE WAKE UP TIME
1. Set the alarm time by following this procedure:
2. Press 2 seconds the ALARM 1 / VOL- (6) or ALARM 2 / VOL+ (5)
Button.
5. Press the TUN/HR+ (4) button to advance HOUR until the correct
time is displayed.
7. Press the TUN/MIN+ (3) button to advance MINUTES until the
correct time is displayed.
8. Press shortly the ALARM 1 / VOL- (6) or ALARM 2 / VOL+ (5) to
finish.
3. Press again shortly the ALARM 1 / VOL- (6) or ALARM 2 / VOL+
(5) button to select BU (Buzzer) or Radio to the activate or
deactivate the alarm type (when ON, the indicator will light up on the
right or left side of the display).
10. To switch off the alarm press repeatedly ALARM 1 / VOL- (6) or
ALARM 2 / VOL+ (5) until tthe indication light disappear.
To review the alarm after set, press and hold ALARM 1 / VOL- (6) or
ALARM 2 / VOL+ (5) button for 2 seconds. The Alarm time will be
blinking on the display. After 5 seconds, it will go back to normal time
display.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roadstar CLR-1966-CR bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roadstar CLR-1966-CR in de taal/talen: Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 0,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info