Handleiding Ritter sono 5 (pagina 17 van 89) (Alle talen)

713219

Verklein

Vergroot

Pagina terug

1/89

Pagina verder

Unfold the illustrations at the front

and back of this manual.

Please read these instructions

thoroughly before you start to use

the appliance. Keep these operat-

ing instructions in a safe place

and ensure that they are included

with the appliance if passing it on

to a third party.

Alternatively, the current operat-

ing instructions are available at

www.ritterwerk.de.

INTENDED USE

The food slicer is used for the

slicing of household foods.

The food slicer is suitable

for contact with

foodstus.

If the appliance is used for a

purpose other than this, or if it is

operated incorrectly, severe inju-

ries may occur or the appliance

may be damaged. All warranty

and liability claims will be ren-

dered null and void in this case.

BEFORE USING THE

APPLIANCE FOR THE

FIRST TIME

Preparation

Remove the appliance carefully

from the packaging. Remove all

packaging components and keep

them in a safe place along with

the packaging itself. Clean the

appliance before allowing it to

come into contact with any food

(see CLEANING).

Setting up the appliance

• Set the appliance down on a

at, nonskid surface close to a

mains socket.

solida

Slide the slice carriage (3)

into the guide grooves on the

appliance.

solida

/ sono

/ sinus

Using a small amount of force,

push the slice carriage (3) verti-

cally into the guide groove on the

appliance until it audibly locks

into place.

Slide the left-over holder (2)

onto the slice carriage's handle.

Unwind the power cord (8)

to the length required from the

cable compartment (9) under the

appliance.

• Plug the cable into the socket.

SLICING

Use the slice thickness

adjustment knob (12) to set the

required thickness.

Info:

The slice thickness adjustment

scale is not a millimetre scale.

For safety reasons, the "0"

position is designed to cover the

blade.

Place the food to be sliced

onto the slice carriage (3). Use

the left-over holder (2) to press it

up against the stop plate (1).

Protect your hands by always

using the slice carriage and,

where applicable, the left-over

holder.

Exception: Excessively large

foods to be sliced.

• Turn the appliance on using

the switch (7). Two operating

modes are available:

Intermittent operation

(Position II):

The rotary blade (13) runs as

long as the switch is pressed and

held down in this position.

Continuous operation

(Position I):

The rotary blade runs without the

switch being pressed and held

down until you move the switch to

the "0” position.

Info:

Never use the appliance for more

than a maximum of 5 minutes in

continuous operation.

• With the appliance running,

gently feed the food to be sliced

into the path of the rotary blade.

• When nished slicing, wait until

the rotary blade has come to a

complete stop.

• After each use, turn the slice

thickness adjustment knob to

the "0" position, in order to cover

up the sharp rotating blade and to

avoid any injuries.

CLEANING

Caution:

Switch the appliance o before

cleaning it; pull the power plug

out o the socket and turn the

slice thickness adjustment

knob (12) to the "0" position.

Clean the food slicer regularly

to prevent the accumulation of

food residue. The rotary blade

must also be cleaned regularly

as described below to prevent its

surface from rusting.

Info:

Over time, an accumulation of

food residue may cause damage

to the surface of the rotary blade,

causing it to rust.

Preparation

solida

• Pull the slice tray (11) to the

left and out of the appliance.

• Removing the left-over

holder (2).

solida

Press the release button (4) and

pull the slice carriage (3) o the

appliance.

solida

/ sono

/ sinus

Pull the slice carriage (3) forward

and then lift it up and out of the

guide groove.

Removing the rotary blade:

Remove the blade cover (6).

Open the blade catch (5), by

turning it in a clockwise direction.

• Remove the blade catch.

• Take hold of the rotary

blade (13) at its rotational centre

and remove it.

English

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Ritter sono 5 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info