544571
21
Verklein
Vergroot
Pagina terug
1/78
Pagina verder
13
Assembly and installation
The last few pages of these
operating instructions contain
drawings with assembly and
installation dimensions.
Please note that the installation
dimensions differ depending on
the appliance version ("SR" or
"SL") (Figs 3)!
Safety instructions
Assembly must be performed
by qualied personnel only.
ritterwerk will not be held
liable for the consequences of
any improper and/or incorrect
assembly.
The mains cable must be
designed such that the
appliance can be swivelled
fully in without jamming the
appliance. The mains cable
must be routed straight from
the installation system to the
socket that is to be mounted
in the oor cabinet.
Remove the mains plug from
the socket before assembly.
Installation conditions
Body width: ............min. 450 mm
Clearance height for drawer
base / crossbeam:
without baseplate: .......75 mm
with baseplate: ............83 mm
Clearance for drawer for worktop
front edge / inner edge and
drawer cover: .................365 mm
(Without mounted nger protec-
tor and left-over holder)
Clearance for width (usable)
Drawer base: .................335 mm
Appliance width: ............345 mm
The drawer base should be at
least 16 mm thick.
For a 45 cm body width, the
inclined formation of the side
frames could mean that the
width clearance (usable) of the
drawer base is a few millime-
tres too small. Mounting it on to
baseplates (15, Fig. 1) enables
up to 4 mm to be gained in terms
of width.
At a nominal length of 400 mm
the drawer's roller guide should
have a static loadability of at least
40 kg.
Mounting the socket
Mount a surface-mounted
socket in accordance with VDE /
DIN 49440, ÖVE, SEV to the rear
panel or the side of the body (see
Fig. 2).
The connection between the
socket and the mains cable
should be routed under the rear
crossbeam or the upper base and
as far up as possible in the rear
corner of the oor cabinet.
The drawer must be capable of
being slid all the way in when the
mains cable is plugged in.
Mounting multi slicer
Preparation:
Pull the drawer out up to the
stop.
Determine the position for the
multi slicer in accordance with the
assembly drawing (see Fig. 3).
or
Position the appliance, when
folded, into the drawer (see
Fig. 3).
The distance between the front
edge of the worktop and the
completely screwed-in buffer
screw (12) should be approx.
5 mm.
Mark the position of the front
and rear fastening brackets
determined in this manner on the
base of the drawer.
Remove the appliance from
the drawer.
Execution:
Drill the four holes as marked
for assembling the appliance
onto the base of the drawer.
Mount the appliance using
four pan-head screws 3.5 x 16
(for drawer base 16 mm).
Mounting retaining brackets
Position the retaining brack-
ets (7) and (8) as shown in
Fig. 3.
Check the position by placing
the nger protector and the left-
over holder onto the correspond-
ing retaining bracket (Fig. 4).
Mark the position of the holes
and then drill them.
Mount the two retaining brack-
ets using countersunk screws
(Phillips drive) PZ 3.5 x 12 (for
drawer base 16 mm).
Adjusting appliance position
Position the appliance as
described in INITIAL START-UP.
Turn the buffer screw (12)
until it just makes contact with
the front edge of the worktop
(do not clamp tight!).
Check the setting by folding
and unfolding it several times in
succession.
Note:
All dimensions in the assembly
drawings stated in mm!
English
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ritter AES 62 SR bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ritter AES 62 SR in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Noors als bijlage per email.

De handleiding is 1,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info