744705
20
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
Operating Instructions
Touch Display
Stove software V2.26.409.02
Display software V2.26.395.01
2
TABLE OF CONTENTS
1. INTRODUCTION 3
2. FIRST STEPS 3
General view of interfaces ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 3
External request ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 3
Serial interface ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 3
USB connection �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 3
3. MENU NAVIGATION 4
Navigation ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4
Standard functions ����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4
Cleaning function ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4
Door opener ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������5
ECO function ����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������5
Active info �����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������5
4. OPERATING MODES 6
Manual mode�������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 6
Automatic mode ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 6
Comfort mode ����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 6
Heating up without electrical ignition �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 6
5. SETTINGS 6
Heating times ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 6
MultiAir fan ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������7
Frost protection ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 7
RIKA room sensor �����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������7
RIKA firenet ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������7
GSM ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������7
Screensaver ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������7
Child lock �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������7
Hotel mode ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������7
Date/time �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������7
Language ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 7
Resets ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������7
Logging �����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������7
Service �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������7
6. INFO 8
Inputs ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 8
Outputs ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 8
Parameters ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 8
7. EXTENDED OPERATING MODES  PELLETS  LOGS 9
Correct heating up ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 9
Automatic log operation ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 9
Eco Operation ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 9
Combined operation �����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������10
Easy-refilling operation ����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 10
Log operation in case of power breakdown���������������������������������������������������������������������������������������������������������������������������������������������������������������������������10
8. NOTES AND WARNINGS 11
Notes ����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������11
Warnings ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 11
9. ERROR MESSAGES 13
Flue gas fan �����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������15
Insertion motor ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������15
Discharge motor ����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 15
Flame sensor ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 16
Communication fault ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 16
Pressure sensor �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������17
Limiter ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������17
Remarks ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������18
|3
EN
2
1. INTRODUCTION
Our congratulations for having purchased a quality product�
To ensure a trouble-free functioning of your appliance we
recommend you to thoroughly read through the present instructions
and to strictly observe the suggestions contained herein at all times�
By cleaning and servicing your appliance regularly and expertly you
will ensure a long-lasting functioning over many years�
RIKA is always ambitious to provide an excellent service� Have a
good time, enjoying the cosy warmth of your RIKA stove as often as
you wish�
RIKA Innovative Ofentechnik GmbH
2. FIRST STEPS
Note
Manipulations on hardware components may only be performed
by a trained expert dealer or our customer service� Inappropriate
handling of these parts will void contractual and legal warranty
claims!
Note
The appliance may only be put into operation if fully assembled!
General view of interfaces
External request
Q External room thermostat*
Q Contactor (e�g� exhaust hood)*
* remove cable bridge and connect a 2-pin cable with a section
between 0�5 and 0�75mm
2
instead�
It will take approximately 1 minutes for your stove to shut down after
receiving an external shut-down request�
Note
Operation is not possible unless either the cable bridge, or an
external request (e�g� an external room thermostat) are connected�
The external request has priority over all operating modes
(MANUAL / AUTOMATIC / COMFORT)�
Serial interface
Q RIKA room sensor/ RIKA radio room sensor (available on request)
Q RIKA GSM Control (available on request)
USB connection
Q RIKA firenet (available on request)
4
3. MENU NAVIGATION
Your stove is equipped with a state-of-the-art control system� You
can control all functions on the touch display� The surface of the
touch display responds to both finger pressure and touch pen�
Note
Do not use sharp-pointed objects to operate the appliance so as to
prevent damaging the surface of the touch display
Navigation
The complete controls of your appliance include 4 main menu levels:
HOME
Controls: Unit start (stop, regulation of heating power /
set ambient temperature, display of current stove state,
active info
OPERATING MODES
Range: Manual mode, automatic mode and comfort
mode
SETTINGS
Setting: Heating times, MultiAir, frost protection, RIKA
room sensor, ���
INFO
Display: flame temperature, total operating hours, total
ignitions, software version,���
Standard functions
Each stove model provides the following standard functions:
Decreases the
heating output
Increases the
heating output
Off Start / Standby
Note
To avoid involuntary starting or switching off, either button must be
depressed for 2 seconds�
Note
If your stove is shut off during the operating states IGNITION or
INITIAL PHASE, the display will switch to BURNOFF only after a
few minutes�
Cleaning function
In addition to the standard functions, stove models with an automatic
grid dispose of a cleaning function�
Grid turning into
cleaning position
Show additional
functions
Note
Turning of the grid is only possible during the operating state
STOVE OFF at a firebox temperature below 80 °C!
|5
EN
4
Door opener
In addition to the standard functions, some stove models dispose of
a door opening function�
Show additional
functions
Hide additional
functions
Opening the
decorative glass
door
ECO function
In addition to the standard functions, the combi stoves dispose of an
ECO function�
Show additional
functions
Hide additional
functions
Switching to the
Eco mode of
operation
Active info
The ‘Active info’ displays whether or not a module is connected or
enabled�
HEATING TIMES
standard function
ROOM SENSOR
only with RIKA room sensor / RIKA radio room sensor
GSM
only with RIKA GSM Controlo
FROST PROTECTION
only with RIKA room sensor / RIKA radio room sensor
RIKA firenet
only with RIKA firenet
Note
More detailed information on the different options can be found in
the respective instructions�
6
4. OPERATING MODES
In the main menu OPERATING MODES you can switch between three
different operating modes: Manual, Automatic and Comfort
Comfort Mode
Manual Mode
Automatic Mode
Mode Select
15:55
Su 12.01.2020
Manual mode
Your stove operates at a heating power preset by you�
The recommended output range is between 50 % and 100 %� If
you wish to select a lower heating output, keep pressing the minus
button for 2 seconds� Now you can set the heating output within the
range from 30 % to 50 %�
Tip
Running the stove at the recommended range from 50 % to 100 %
of the heating capacity will cause less sooting of the firebox and
the door glass�
Automatic mode
Your stove operates at the heating power preset by you during the
heating times, as saved� Outside the heating times your stove is in
the STANDBY operating state�
Tip
If you select the automatic mode although no heating times
are saved, the symbol “heating times” will be flashing� The stove
remains in standby
Note
The stove may only be started in the STANDBY operating state� In
the operating state STOVE OFF it is not possible to start up the
stove�
Comfort mode
Note
The comfort mode may only be selected if a RIKA room sensor is
connected�
During the heating times, as saved, your stove keeps a nominal room
temperature preset by you�
Outside the heating times, it is possible to adjust a setback
temperature� If the room temperature drops below the adjusted
setback temperature, your stove will start outside the saved heating
times as well�
In this operating mode, heating times may be disabled as well� In this
case, your appliance will permanently heat the room to the nominal
temperature you set�
Note
The stove may only be started in the STANDBY operating state� In
the operating state STOVE OFF it is not possible to start up the
stove�
Heating up without electrical ignition
If the ignition cartridge of the appliance should fail, firelighters can
be used to ensure an emergency operation� First, start the stove
as usual� Wait for the cleaning cycle and for the grid to tip� Then
open the firebox door and place a handful of pellets, along with the
firelighter, into the cleaned fire trough and light it up, subsequently
closing the firebox door
Attention
Do not use any flammable liquids to light up the fire!
5. SETTINGS
The main menu SETTINGS is provided to set, among others, the
heating times, Multi Air blower, frost protection etc�
Heating times
Using the heating times program you can operate your stove
according to the heating schedule� Activating heating times (ON)
gives access to setback temperature (only with RIKA room sensor),
and the heating times program�
Heating program
Heating times
Setback temp
Heating times
ON
14
15:55
Su 12.01.2020
In the heating times program, single weekdays, or a couple of
weekdays can be marked simultaneously (highlighted in ORANGE)�
Upon selecting heating time I or heating time II you can enter the ON
and OFF times you require for the marked weekdays�
Weekdays that have already been programmed are highlighted in
GREEN when re-accessing the heating times program�
Heating time II
Heating time I
Heating times
ON OFF
##:## ##:##
Mo Tu We FrTh Sa Su
20:15 21:45
15:55
Su 12.01.2020
Tip
As soon as a weekday is marked, the saved heating times are
displayed�
If a number of weekdays are marked, only the identical heating
times are displayed� If the heating times differ from each other,
hash keys (##:##) are displayed�
Tip
If your stove does not start up although heating times have been
saved, please check if they are enabled (ON) and if your stove is in
STANDBY operating state�
|7
EN
6
MultiAir fan
Enabling the Multi Air fan (ON) you get access to fan speed and fan
adaptation�
Fan level
The volume of convection air is adjustable from AUTO (adapts
automatically according to heating power), over to Level 1 (min) and
level 5 (max)�
Fan area
In addition, it is possible to adapt the Multi Air fan speed (AUTO,
level 1 to level 5) within +/- 30 % of fan speed�
Frost protection
Note
Only possible if a roomsensor is connected�
If this function is enabled (ON) and if the room temperature drops
below the set value (4 °C - 10 °C), your stove will start working�
This applies also outside the heating times and in operating state
STOVE OFF
RIKA room sensor
For more information on this option, please consult the operating
instructions room sensor / RIKA radio room sensor
Room temperature
Display of the current room temperature in degrees Celsius�
Temperature adjustment
It is possible to adjust the temperature shown in the infomenu�
Overheat protection
The stove switches to burn-off if the room temperature exceeds
30 °Celsius�
Power requirement
factory setting 3
The heating power is adjustable from level 1 (for small rooms) to
level 4 (for big rooms)�
Modulation
When modulation is activated, you can adjust the hysteresis from
0�5 - 1 °Celsius�
RIKA firenet
For more information on this option, please consult the operating
instructions RIKA firenet�
GSM
For more information on this option, please consult the operating
instructions RIKA GSM Control�
Screensaver
When the screensaver is activated (ON), you can choose between
the modes Classic, Info and Dark
Q Classic: RIKA sustainability-themed screensaver
Q Info: Actual and nominal temperature or heat output (depending
on mode, only possible with RIKA room sensor connected)
Q Dark: a darkened screen
In the Advanced menu, you can set the delay time in minutes
(1 - 60 min) and the brightness� Adjusting the brightness is not
available for Dark mode
Child lock
Note
Only possible with the screensaver activated�
If this function is enabled (ON), a 4-digit code can be saved� Await
the activation of the screen saver
The stove can only be operated with the saved code�
Hotel mode
Note
Only possible with the screensaver activated�
Enable the child lock (ON) and save a 4-digit code� Enable the hotel
mode� Await the activation of the screen saver
You can only press the buttons ON  OFF  PLUS  MINUS� Now a
selection of further functions is only possible by entering the saved
code�
Date/time
Sets date and time
Language
Selects the desired language
Tip
Both language selection and setting of date and time must only be
carried out on initial operation�
Resets
Note
This reset may only be performed if the stove temperature is below
80 °C!
Kg till cleaning
Resets the supply rate after a service has been carried out�
Factory setting
Resets all stove settings to the factory setting�
WLAN Setup
Reset WLAN Setup
Logging
Only for service technicians�
Service
Only for service technicians�
8
6. INFO
In the main menu INFO you can retrieve the most important
parameters�
Parameters
Info
Input
Output
Su 12.01.2020
15:55
Inputs
Flame temperature [°C]
Current firebox temperature
Room temperature [°C]
ACTUAL temperature in the room
only with RIKA roomsensor
Baking temp. [°C]
Current baking temp�
Pressure switch
Sufficient low pressure in the firebox to ensure operation (ON),
or insufficient (OFF)
Grid contact
Grid in heating position (ON) or other position (OFF)
Pressure sensor
Differential pressure in the air supply (DAR system - Dynamic Air
Regulation system)
Ext. Request
External request enabled (ON) or disabled (OFF)
Outputs
Discharge motor [‰]
Actual speed (0 - 1000)
Discharge motor current
Actual current consumption (0 - 120)
Flue gas fan [1/s]
Actual speed (0 - 2500)
Insertion motor [‰]
Actual speed (0 - 1000)
Insertion motor current
Actual current consumption (0 - 120)
Air flaps [‰]
Current position (0 - 1000)
Grid motor
Actuated (ON) or in rest (OFF)
Multi Air fan
Actuated (ON) or in rest (OFF)
Multi Air fan 2
Actuated (ON) or in rest (OFF)
Ignition element
Actuated (ON) or in rest (OFF)
Parameters
Operat. hours pellets
Total operating hours in pellet mode (0 - 99999)
Feed rate total [kg]
Total pellet feed volume (0 - 99999)
Kg till cleaning
Remaining pellets feed volume until next cleaning (1500 - 0)
Operat. h. split logs
Total operating hours in split log mode (0 - 99999)
Ignition counter
Total ignitions (0 - 99999)
ON/OFF cycles
Number of power failures
Main State
Main operating regulation state
Sub State
Secondary operating regulation state
Stove type
Name of appliance
Software stove
Software version stove control
Software display
Software version touch display
GFX version
Graphics version touch display
Tip
On the first screen page the precise information of the software
version with the revision number is diplayed�
Disconnect the main plug for a short time� When the display shows
the RIKA Logo on orange screen, there is the name of your stove
in the left corner� Touch the stove name, and the software version
actually installed will be displayed�
|9
EN
8
7. EXTENDED OPERATING MODES  PELLETS  LOGS
Your combi stove features an automatic fuel recognition and a
combustion regulation� Operation may any time switch between
pellets and logs�
Note
It is imperative to use the feed rates as indicated in the instructions
manual of your stove, without any exception�
Note
During the whole period of log operation the functions of heating
time, room temperature and frost protection, as well as the external
request are disabled� These functions will not be re-activated
before log operation has finished�
Correct heating up
Note
Do not use any flammable liquids to light up the fire!
Open the firebox door and place 2 small pieces of chipboard in
longitudinal direction to either side of the firebox floor
Place 2 or 3 logs crossways onto the chipboard�
Now place more chipboard pieces crossways and add 2-4 ribs of the
RIKA firelighter on top of the chipboard� If necessary, some uncoated
paper can be placed under the chipboard instead of the firelighter
Now set the RIKA firelighter alight and close the firebox door
Note
Be sure that the combustion trough is empty as the grid will tip
after the firebox door has been closed�
Tip
The RIKA firelighter no� E15834 is available from your RIKA dealer
Automatic log operation
The automatic burn-off regulation shows the following sequence:
LOG CHECK
Your stove checks if logs have been placed�
LOG OPERATION  ECO OPERATION
Your stove ensures optimum log burn-off�
PLEASE RELOAD
Your stove indicates the time you should add more logs�
DO NOT RELOAD
Your stove reports that no ignition can be ensured after logs have
been added�
Eco Operation
For a small amount of fuel (partial load) you should use the
ECO OPERATION mode� Under ‘Extended functions’, after closing the
firebox door you can switch to ECO OPERATION - the operating state
LOG CHECK will change to ECO OPERATION
Note
The ECO OPERATION mode is only possible after the first burn-off!
18
Remarks
|19
EN
18
In case of doubt as well as missing or incorrect
translations, the German version is the only
valid one. Subject to technical and visual
changes as well as layout and printing errors..
© 2020 | RIKA Innovative Ofentechnik GmbH
Z36223_TouchDisplay_V2�26_EN | 10�03�2020
RIKA Innovative Ofentechnik GmbH
Müllerviertel 20
4563 Micheldorf / AUSTRIA
Tel.: +43 (0)7582/686 - 41, Fax: -43
verkauf@rika.at www.rika.at
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rika Touch Display V2-26 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rika Touch Display V2-26 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Rika Touch Display V2-26

Rika Touch Display V2-26 Gebruiksaanwijzing - Nederlands - 20 pagina's

Rika Touch Display V2-26 Gebruiksaanwijzing - Deutsch - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info