9
to the properties of the liquid crystal and is not a malfunction.
• If the camera is subjected to rapid temperature changes, condensation may form on the inside
and outside of the camera. Therefore put the camera in a bag or plastic bag and take the
camera out when the difference in temperature has subsided.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salts. These could cause the
camera to breakdown. Wipe the camera to dry off any rain or water drops.
• Please do not press forcefully on the display. This could cause it to break or malfunction.
• Be careful not to sit down with the camera in you back pocket as this may damage the exterior
of the camera or the display.
• When using a tripod with the camera, be careful not to overtighten the screw in the tripod socket
on the camera.
About Repairs
• Do not clean the product with organic solvents such as thinner, alcohol or benzine.
• Use a lens brush to remove dust accumulated on the lens. Never use a spray blower for
cleaning as it may damage the lens.
About Storage
• Avoid storing the camera where pesticides and chemicals are handled. Remove the camera
from its case and store it in a well-ventilated place to prevent the camera from becoming moldy
during storage.
• Avoid using or storing the camera where it may be exposed to static electricity or electrical
interference.
• Avoid using or storing the camera in direct sunlight or in locations where it may be exposed to
rapid changes in temperature or to condensation.
• Periodic checks are recommended every 1 to 2 years in order to maintain high performance.
