104116
133
Verklein
Vergroot
Pagina terug
1/155
Pagina verder
131
Appendix
Autofocus is on
but camera not
focusing
Problem
Flash will not
fire or will not
charge
Image dark
even with flash
Image is too
dark
Unnatural
coloration of
image
Date and other
recording data
not displayed
Playback is not
clear
Cause
Dirty lens or AF viewfinder
Subject not in center of shooting
scope
Subject difficult to focus on
Distance to subject is too close
Recording mode set on
(Voice
Memo),
(Text), (Continuous
Shooting) or
(Motion Picture)
Flash mode set on
(flash off)
Camera set on macro mode
White balance set to mode other
than auto
Battery exhausted
Distance to subject more than
approx. 2.5 m
Subject is too close
Overexposed
Contrast setting not correctly
adjusted
Shot in low light with flash set to
(flash off)
Underexposed
Brightness setting not correctly
adjusted
Shooting conditions difficult for auto
white balance mode
Screen display set to [OFF]
Camera not set to
(Play) mode
Incorrect playback source
CF card or PC card not inserted, or
inserted card does not contain any
files
Card not formatted with this camera
Card contains incorrectly recorded
files
Card contains files in format not
supported by this camera
AV interface cable not properly
connected
Source of interference, such as
electric motor, nearby
CF card or PC card contact surface
dirty
Error in internal memory of camera
Error in CF card or PC card
Remedy
Clean lens or viewfinder.
Use focus lock.
Use focus lock or switch to manual focus.
Set macro mode.
Set mode dial to
(Still Picture) or
(Text) mode.
Press button to cancel flash off mode.
Press
button to cancel macro mode.
Press WB button to switch white balance to
auto mode.
Charge battery.
Move closer to subject.
Set flash to flash off mode.
Adjust exposure compensation from
recording menu. Set time exposure mode
to OFF.
Press LCD contrast adjustment buttons to
adjust contrast of LCD monitor.
Press
button to cancel flash off mode.
Press
button to adjust exposure
compensation.
Press LCD Contrast Adjustment button to
adjust contrast of LCD monitor.
Place a white object near subject, use
flash, or select manual white balance
mode.
Press DISPLAY button to switch display
mode.
Set mode dial to
(Play).
Press
button to change playback
source. Switch to another folder containing
files.
Insert card containing recorded images.
Use card that has been formatted and
recorded with this camera.
Insert card containing properly recorded
images.
Check format type.
Connect properly.
Move camera away from source of
interference.
Clean with soft, dry cloth.
Copy required files from internal memory
onto CF card or PC card and format
internal memory.
Test camera with another card. If second
card displays well, problem is with card not
camera. Do not use this card.
Page
P.57
P.57
P.69
P.69
P.49
P.58
P.62
P.69
P.66
P.15
P.62
P.62
P.64
P.79
P.28
P.62
P.64
P.28
P.66
P.49
P.87
P.84
P.84
P.100
P.20
P.43
P.20
P.84
P.88
P.43
P.92
Image is too
bright
No playback or
image will not
appear
133

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ricoh RDC-I 700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ricoh RDC-I 700 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info