JOG key
Use these keys to shift the carriage or the media in
[LOCAL]. Also use them to select an item of printing
conditions.
key
Use this key to display function setting menu.
key
Cancels the last input value or returns the setting menu
to the immediate higher level of the hierarchy.
Display
Displays the status of the
machine, set items and errors.
ACTIVE lamp
It lights when the power
supply is turned on.
key
Use this key to switch between [REMOTE] and
[LOCAL].
key
Registers the last input value as the setting value or
goes to the immediate lower level of the hierarchy.
key
Use this key on cutting .
key
Draws test patterns to check if there are any
drawing failures such as ink clogging.
Or executes Head cleaning at ink clogging.
key
Use this key to set the temperatures of the Pre-
heater, Print heater, Post-heater and Drying heater
or check the current temperature of the Media
Transfer Surface.
key
Performs the adjusting function
such as “Drop.POScorrect” and
“Feed COMP.”
key
Performs the maintenance
function such as station
maintenance.
key
Deletes the data that have been
received.
CONSTANT lamp
Lights in green when the heater temperature
reaches the set temperature.
HEAT lamp
Lights in orange during heating up of the heater.
Power switch
Turns on/off the power to the machine.
