Handleiding Ricoh G900 (pagina 153 van 169) (Engels)

708175

153

Verklein

Vergroot

Pagina terug

1/169

Pagina verder

Chapter 1: Introduction

Read this chapter before use.

This chapter gives you an overview of the RICOH G900 and RICOH G900SE.

Chapter 2: Getting Started

Read this chapter before using the RICOH G900 and RICOH G900SE for

the first time.

This chapter explains about basic operations such as turning the camera on,

performing shooting, and playing back images.

Chapter 3 and later

Read these chapters when you want to learn more about the different

camera functions.

These chapters explain about shooting and playback functions, as well as

how to customize the camera settings and use it with a computer.

Operating Manual

The serial number is located inside the battery/card cover.

Model: R02060

R02070

Regarding User Registration

Thank you for purchasing a RICOH product.

In order to provide you with the best customer support and service experi-

ence for the product you have purchased, we ask you to complete the user

registration.

Visit the following website to complete the user registration.

http://www.ricoh-imaging.com/registration/

Registered users will be notified by e-mail about important customer sup-

port information, such as firmware version updates, etc.

Introduction

This Operating Manual provides information on how to use the shooting and playback

functions of this camera and related precautions.

Thoroughly read this Operating Manual to make the best use of the functions available

with this camera. Be sure to keep this Operating Manual for future reference.

It is recommended to update the camera firmware to the latest version before using

the camera.

For details on the latest firmware version, refer to the following firmware download site.

http://www.ricoh-imaging.co.jp/english

RICOH COMPANY, LTD.

Safety precautions Read all safety precautions thoroughly to ensure safe use.

Test shots Take test shots to ensure that the camera is working properly be-

fore taking pictures on important occasions.

and other materials, other than for personal, home, or other simi-

larly limited purposes, without the consent of the copyright holder,

is prohibited.

Exemption from liability RICOH COMPANY assumes no liability for failure to record or display

images as a result of product malfunction.

Notes on radio waves • As this camera is certified as compliant with the technical stan-

dards, disassembly or modification of the camera is punishable

by law.

• In the frequency band used by the camera, along with indus-

trial, scientific, and medical devices such as microwave ovens,

premises radio stations (radio stations requiring a license) and

specified low power radio stations (radio stations requiring no

license) for mobile object identification used in factory produc-

tion lines, etc., and amateur radio stations (radio stations requir-

ing license) are operated.

1. Before using the camera, confirm that premises radio stations

and specified low power radio stations for mobile object

identification and amateur radio stations are not operated in

the vicinity.

2. In the event that the camera causes harmful radio wave in-

terference to premises radio stations for mobile object iden-

tification, immediately change the frequency being used or

immediately stop the emission of radio waves and consult

your service center about measures against the interference

such as installing partitions.

3. If you have other troubles such that the camera causes harm-

ful radio wave interference to specified low power radio

stations for mobile object identification or to amateur radio

stations, contact your service center.

Radio interference Operating this camera in the vicinity of other electronic equipment

may adversely affect both the camera and the other device. Inter-

ference is particularly likely if the camera is used in close proximity

to a radio/TV receiver. In such case, take the following measures.

• Keep the camera as far away as possible from the radio/TV re-

ceiver.

• Reorient the antenna of the radio/TV receiver.

• Use a different wall outlet.

This publication may not be reproduced in whole or in part without RICOH COMPANY’s express written permission.

RICOH COMPANY reserves the right to change the contents of this manual at any time without prior notice.

Every effort has been made to ensure the accuracy of the information in this manual. Should you nevertheless

notice any errors or omissions, we would be grateful if you would notify us at the address listed on the back cover

of this manual.

About Wireless LAN and Bluetooth® Functions (G900SE Only)

• Available frequency bands vary depending on the country. Use the wireless LAN function of this product only

in the country of purchase.

• The use of the 5 GHz band is prohibited in some countries. When using the 5 GHz band, observe local laws and

regulations.

• This product uses only W52 channels (36ch to 48ch) in the 5 GHz band of wireless LAN. (Indoor use only)

• In Japan, indoor use only, except connecting to 5.2 GHz high power base station.

• Do not use the camera in a place where electrical products, AV/OA devices, and so on generate magnetic fields

and electromagnetic waves.

• If the camera is affected by magnetic fields and electromagnetic waves, it may not be able to communicate.

• If the camera is used near a TV or a radio, poor reception or TV screen glitch may occur.

• If there are multiple wireless LAN access points or Bluetooth® devices near the camera and the same channel is

used, search operation may not be executed correctly.

• The security of your data stored, sent or received is your own responsibility.

In the frequency band used by the camera, along with industrial, scientific, and medical devices such as micro-

wave ovens, premises radio stations (radio stations requiring a license) and specified low power radio stations

(radio stations requiring no license) for mobile object identification used in factory production lines, etc., and

amateur radio stations (radio stations requiring a license) are operated.

1. Before using the camera, confirm that premises radio stations and specified low power radio stations for

mobile object identification and amateur radio stations are not operated in the vicinity.

2. In the event that the camera causes harmful radio wave interference to premises radio stations for mobile

object identification, immediately change the frequency being used to avoid interference.

3. If you have other troubles such that the camera causes harmful radio wave interference to specified low

power radio stations for mobile object identification or to amateur radio stations, contact your nearest ser-

vice center.

This camera conforms to the technical standards under the Radio Law and Telecommunications Business Law and

the certification of conformance to technical standards can be displayed on the monitor.

Displaying the Certification Marks -----------------------------------------------------------------------------------------------------------------

1 Display the menu.

2 Select [Certifications] in the E menu.

Trademarks

• Microsoft, Windows, and Windows Server are registered trademarks of Microsoft Corporation in the United States

of America and other countries.

• Mac, macOS, OS X, and App Store are trademarks of Apple Inc., registered in the U.S. and other countries.

• SDXC Logo is a trademark of SD-3C, LLC.

• FlashAir is a trademark of Toshiba Memory Corporation.

• Google, Google Play, and Android are trademarks or registered trademarks of Google Inc.

• The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such

marks by Ricoh Company, Ltd. is under license.

• USB Type-C is a trademark of USB Implementers Forum.

• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing, LLC in the United States and/or other countries.

• FeliCa is a registered trademark of Sony Corporation. FeliCa is the contactless IC card technology developed by

Sony Corporation.

• MIFARE is a registered trademark of NXP Semiconductors N.V.

• This product supports the Quasi-Zenith Satellite System “Michibiki”.

All other trademarks are the property of their respective owners.

• This product uses the RICOH RT font designed by RICOH COMPANY, LTD.

AVC Patent Portfolio License

This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in

which it does not receive remuneration to (i) encode video in compliance with the AVC standard (“AVC video”) and/

or (ii) decode AVC video that was encoded by a consumer engaged in a personal activity and/or was obtained from

a video provider licensed to provide AVC video.

No license is granted or shall be implied for any other use.

Additional information may be obtained from MPEG LA, L.L.C.

See http://www.mpegla.com.

Announcement about the Open Source Software

This camera includes the open source software (OSS) licensed under the GNU General Public License (GPL), GNU

Lesser General Public License (LGPL), and/or other licenses. The information about licenses of each OSS used in the

camera is saved in the camera internal memory as a text file. Connect the camera to a computer after setting [USB

Connection] to [CD-ROM] in the E menu of the camera, and then open the text file in the “oss_license” folder to

read the license terms.

The source codes of OSS used in the camera are disclosed under the license terms of GPL, LGPL, etc. If you need the

source codes, access the following URL.

http://www.ricoh-imaging.co.jp/english/products/oss/

Safety Precautions

Warning Symbols

Various symbols are used throughout this Operating Manual and on the product to

prevent physical harm to you or other people and damage to property. The symbols

and their meanings are explained below.

Danger

This symbol indicates matters that may lead to imminent risk of

death or serious injury if ignored or incorrectly handled.

Warning

This symbol indicates matters that may lead to death or serious injury

if ignored or incorrectly handled.

Caution

This symbol indicates matters that may lead to injury or property

damage if ignored or incorrectly handled.

Meaning of Symbols

The symbol alerts you to actions that must be performed.

The symbol alerts you to prohibited actions.

The symbol may be combined with other symbols to indicate that a spe-

cific action is prohibited.

Example:

: Do not touch : Do not disassemble

Observe the following precautions to ensure safe use of this camera.

Danger

Do not attempt to disassemble, repair, or alter the camera yourself. The

high-voltage circuitry in the equipment poses significant electrical hazard.

Do not attempt to disassemble, alter, or directly solder the battery.

Do not put the battery in a fire, attempt to heat it, or use or leave it in a

high temperature environment such as next to a fire or inside a car. Do not

put it into water or the sea or allow it to get wet.

Do not attempt to pierce, hit, compress, drop, or subject the battery to any

other severe impact or force.

Do not use a battery that is significantly damaged or deformed.

Warning

Turn off the power immediately in the event of abnormalities such as

smoke or unusual odors being emitted. Remove the battery as soon as

possible, being careful to avoid electric shocks or burns. If you are drawing

power from a household electrical outlet, be sure to unplug the power

plug from the outlet. Failure to observe this precaution could result in

fire or electric shocks. Contact the nearest service center at your earliest

convenience. Stop using the camera immediately if it is malfunctioning.

Turn off the power immediately if any metallic object, water, liquid, or oth-

er foreign object gets into the camera. Remove the battery and memory

card as soon as possible, being careful to avoid electric shocks or burns.

If you are drawing power from a household electrical outlet, be sure to

unplug the power plug from the outlet. Failure to observe this precaution

could result in fire or electric shocks. Contact the nearest service center

at your earliest convenience. Stop using the camera immediately if it is

malfunctioning.

If the monitor is damaged, avoid any contact with the liquid crystal inside it.

Follow the appropriate emergency measures below.

• SKIN: If any of the liquid crystal gets on your skin, wipe it off and rinse the

affected area thoroughly with water, then wash well with soap.

• EYES: If it gets in your eyes, wash your eyes with clean water for at least 15

minutes and seek medical advice immediately.

• INGESTION: If any of the liquid crystal is ingested, rinse the mouth out

thoroughly with water. Have the person drink a large amount of water and

induce vomiting. Seek medical assistance immediately.

Follow these precautions to prevent the battery from leaking, overheat-

ing, igniting, or exploding.

• Do not use a battery other than those specifically recommended for the

camera.

• Do not carry or store the battery together with metal objects such as ball-

point pens, necklaces, coins, and hairpins.

• Do not put the battery into a microwave or high pressure container.

• If leakage of battery fluid, a strange odor, color change, etc. is noticed

during use or during charging, remove the battery from the camera or

battery charger immediately and keep it away from fire.

Observe the following in order to prevent fire, electrical shock, or cracking

of the battery while charging.

• Use only the indicated power supply voltage. Also avoid the use of

multi-socket adapters and extension cords.

• Do not damage, bundle, or alter the AC plug cord. Also, do not place heavy

objects on, stretch, or bend the AC plug cord.

• Do not connect or disconnect the power plug with wet hands. Always grip

the plug section when disconnecting a power plug. Do not cover the cam-

era while charging the battery.

Keep the battery and SD memory card used in the camera out of the reach

of children to prevent accidental swallowing. The battery and memory

card are harmful if swallowed. Seek medical assistance immediately.

Keep the camera out of the reach of children. For children, accidents may

occur because they cannot understand the contents of “Safety Precau-

tions” and “Precautions for Use”.

Do not touch the internal components of the camera if they become ex-

posed as a result of being dropped or damaged. The high-voltage circuitry

in the equipment could lead to electric shocks. Remove the battery as

soon as possible, being careful to avoid electric shocks or burns. Take the

camera to your nearest dealer or service center if it is damaged.

When using the camera in wet areas such as a kitchen, be careful not to

wet the inside of the camera. Failure to observe this precaution could re-

sult in fire or electric shocks.

Do not use the camera near flammable gases, gasoline, benzine, thinner,

or similar substances. Failure to observe this precaution could result in an

explosion, fire, or burns.

Do not use the camera in a location where usage is restricted or prohib-

ited, such as on airplanes. Failure to observe this precaution could result

in an accident.

Wipe off any dust that accumulates on the power plug. Failure to observe

this precaution could result in fire.

When using a household power outlet, always use the dedicated AC

adapter. Failure to observe this precaution could result in fire, electric

shocks, or product malfunction.

Do not use the battery charger or AC adapter with commercially available

electronic transformers when traveling abroad. Failure to observe this pre-

caution could result in fire, electric shocks, or product malfunction.

Caution

Contact with fluid leaking from a battery can lead to burns. If part of your

body comes in contact with a damaged battery, rinse the area with water

immediately. (Do not use soap.)

If a battery starts to leak, remove it immediately from the camera and wipe

the battery chamber thoroughly before replacing it with a new battery.

Plug the power plug securely into the electrical outlets. Failure to observe

this precaution could result in fire.

Do not allow the camera interior to get wet. When operating the camera

with wet hands, be careful not to get the camera interior wet. Failure to

observe this precaution could result in electric shocks.

Do not fire the flash at drivers of vehicles, as this may cause the driver to

lose control and result in a traffic accident. Failure to observe this precau-

tion could result in a traffic accident.

Safety Precautions

for Accessories

When using optional products, carefully read the user’s manuals provid-

ed with the product before using that product.

Caution -------------------------------------------------------------------------------------------------------

• Only the camera is chemical-resistant. Accessories are not resistant to chemicals.

Introduction ........................................................................................................................... 1

Safety Precautions ................................................................................................................ 5

Introduction 13

Checking the Contents of the Package ......................................................................13

Names and Functions of the Working Parts ..............................................................14

Operating Controls ...........................................................................................................................16

Indicators on the Monitor ................................................................................................18

Shooting Screen .................................................................................................................................18

Playback Screen .................................................................................................................................19

Changing the Screen Display ........................................................................................................ 20

How to Change Function Settings ...............................................................................22

Using the Button ................................................................................................................................ 22

Setting from the Menus ..................................................................................................................24

Menu List ............................................................................................................................... 26

A Shooting Menu ........................................................................................................................... 26

B Movie Menu ................................................................................................................................. 27

C Playback Menu ............................................................................................................................ 28

D Customize Menu.........................................................................................................................29

E Setup Menu ..................................................................................................................................30

F Expanded Settings Menu ..........................................................................................................31

G Network Menu (G900SE Only) ................................................................................................ 32

Getting Started 34

Setting the Battery and a Memory Card ....................................................................34

Inserting the Battery and a Memory Card ................................................................................ 34

Charging the Battery ........................................................................................................................ 37

Initial Settings ...................................................................................................................... 39

Turning the Camera On ................................................................................................................... 39

Setting the Language and the Date and Time ........................................................................ 40

Formatting a Memory Card ............................................................................................................40

Basic Shooting Operation ................................................................................................42

Shooting in the Auto Mode ...........................................................................................................42

Viewing the Captured Images.......................................................................................................43

Taking Pictures 44

Taking Still Images .............................................................................................................44

Setting the Capture Mode ..............................................................................................................44

Using Exposure Compensation ....................................................................................................46

Recording Movies ............................................................................................................... 47

Playing Back Movies .........................................................................................................................48

Contents

Setting the Focus Mode ...................................................................................................49

Focusing Manually (Manual Focus) ............................................................................................. 51

Setting the Exposure ......................................................................................................... 52

Selecting a Metering Method ....................................................................................................... 52

Setting the ISO Sensitivity .............................................................................................................. 53

Using the Flash ...................................................................................................................................54

Setting the White Balance ...............................................................................................56

Setting the White Balance Manually ...........................................................................................57

Setting the Drive Mode .................................................................................................... 58

Shooting Using the Self-timer ......................................................................................................58

Shooting Continuously ....................................................................................................................59

Shooting Using the Remote Control Unit ................................................................................. 60

Shooting with Varied Exposure Values ...................................................................................... 61

Configuring the Capture Settings ................................................................................62

Image Capture Settings ...................................................................................................................62

Movie Capture Settings ................................................................................................................... 62

Setting the Image Finishing Tone and Correction ..................................................63

Setting the Image Atmosphere (Image Tone) ......................................................................... 63

Setting the Sharpness, Saturation, Tone, and Contrast ........................................................64

Imprinting the Date on Still Images ............................................................................................64

Capturing Images with Clearer Details ...................................................................................... 64

Correcting a Range of Tones (D-Range Setting) ..................................................................... 65

Reducing Blurring of Images ......................................................................................................... 65

Correcting a Rectangular Subject (Skew Correction) ........................................................... 66

Detecting Edited Images ................................................................................................................67

Adding Information to Captured Images ..................................................................68

Using the Camera Memo ................................................................................................................ 68

Capturing Images at the Same Angle (Watermark Options) ............................................. 73

Attaching an Auxiliary Image (Image Clip)...............................................................................75

Compositing Images during Shooting ...................................................................................... 77

Playback Functions 79

Changing the Playback Method ....................................................................................79

Displaying Multiple Images ...........................................................................................................79

Playing Back Images Continuously (Slideshow) ..................................................................... 80

Displaying Rotated Images ............................................................................................................ 81

Connecting the Camera to an AV Device .................................................................................. 82

Organizing Files ...................................................................................................................83

Deleting Files .......................................................................................................................................83

Copying Images .................................................................................................................................84

Protecting Images from Deletion ................................................................................................85

Editing and Processing Images .....................................................................................86

Changing the Image Size ................................................................................................................86

Processing Images with Filters ......................................................................................................88

Editing Movies .................................................................................................................................... 89

Correcting Red Eyes in Images .....................................................................................................91

Using Communications and Network 92

Using a Computer ..............................................................................................................92

Setting the Connection Mode ......................................................................................................92

Copying Images to a Computer ...................................................................................................93

Using the Provided Software .........................................................................................................94

Operating the Camera with a Computer (G900SE Only) ..................................................... 95

Using the Network (G900SE Only) ................................................................................ 96

Selecting the Communication Method ..................................................................................... 96

Operating the Camera with a Communication Device ........................................................ 97

Setting the Wireless LAN Connection ........................................................................................98

Setting the Bluetooth® Connection ..........................................................................................100

Transmitting Files.............................................................................................................................101

Using the Support Functions ......................................................................................................103

Setting the Camera Operations When Using a Dedicated Server ..................................103

Changing the Settings 105

Saving Frequently Used Settings ................................................................................105

Using the Mode Dial .......................................................................................................................105

Exporting the Settings to a File ..................................................................................................106

Customizing the Button Functions ............................................................................107

Registering Functions to the ADJ. Button...............................................................................107

Registering Functions to the Fn Button...................................................................................108

Display and Sound Settings ..........................................................................................109

Setting the Start-up Screen .........................................................................................................109

Setting the Information Displayed when the Camera Is Turned On/Off .....................109

Setting the Live View Display ......................................................................................................109

Setting the Brightness of the Monitor .....................................................................................110

Setting the Lamp .............................................................................................................................110

Setting the Sound Volume ...........................................................................................................110

Power Saving Settings ....................................................................................................111

Automatically Turning the Power Off .......................................................................................111

Dimming the Display......................................................................................................................111

Setting the GPS .................................................................................................................113

Displaying the GPS Information .................................................................................................114

Automatically Adjusting the Date and Time Settings ........................................................115

Recording the Camera Route ......................................................................................................115

Setting the Direction Information .............................................................................................117

Imprinting the GPS Information .................................................................................................117

File Management Settings ............................................................................................118

Specifying the Folder/File Settings ...........................................................................................118

Setting the Copyright Information ............................................................................................122

Saving the Local Date and Time of the Specified City ........................................................124

Camera Memo Settings ..................................................................................................125

Setting the Camera Memo Mode ..............................................................................................125

Using a Barcode ................................................................................................................................126

Using an IC Card (G900SE Only)..................................................................................................128

Security Settings ...............................................................................................................129

Setting a Password on the Camera ...........................................................................................129

Setting a Password on the Memory Card ...............................................................................131

Setting the Password Validity Period ........................................................................................132

Appendix 133

Attaching Optional Accessories ..................................................................................133

Wide Conversion Lens ....................................................................................................................133

AC Adapter .........................................................................................................................................134

Troubleshooting ...............................................................................................................135

Power Supply ....................................................................................................................................135

Shooting .............................................................................................................................................136

Playback/Deletion ...........................................................................................................................137

Others ..................................................................................................................................................139

Error Messages ..................................................................................................................................140

Main Specifications ..........................................................................................................141

Camera ................................................................................................................................................141

USB Power Adapter AC-U1/AC-U2 .............................................................................................145

Rechargeable Battery DB-110 .....................................................................................................145

Battery Charger BJ-11 ....................................................................................................................145

Image Storage Capacity ................................................................................................................146

Operating Environment ................................................................................................................147

Using the Camera Abroad .............................................................................................148

Precautions for Use ..........................................................................................................149

Camera Care and Storage ..............................................................................................153

Warranty Policy..................................................................................................................155

Regulatory Compliance Statements ..........................................................................156

Index......................................................................................................................................163

Introduction

Checking the Contents of the Package

Before using your digital camera, confirm that the package contains the

items listed below.

RICOH G900

RICOH G900SE

Rechargeable

battery (DB‑110)

USB power

adapter (AC‑U1

or AC‑U2)*

* Differs depending

on the region.

Power plug

Battery charger

(BJ‑11)

Macro stand

(O‑MS3)

USB cable (I‑USB173)

Neck strap (O‑ST174)

Operating Manual (this manual)

Regarding Waterproof Design

Macro Stand -------------------------------------------------------------------------------------------------

• The macro stand is used to keep a distance of 1 cm between the lens and the subject. Attach the

macro stand to the camera by screwing it into the lens. You can use it in capture modes such as the

digital microscope mode. (p.44)

• When the macro stand is attached to the camera, it may be difficult to focus on the subject depending

on the type of subject.

Software Operating Manual -----------------------------------------------------------------------------

• The “Operating Manual (for Software)” explaining how to use the provided software is included in the

internal memory of the camera. (p.94)

Introduction

Names and Functions of the Working Parts

Ring light

Speaker

Remote control

receiver

Lens

AF assist light

Microphone

Flash

Strap eyelet

NFC mark

(G900SE only)

Power button lamp

Remote control

receiver

Strap eyelet

Monitor

Introduction

USB terminal (USB Type-C)

Tripod screw hole

Release lever

Battery/card cover

HDMI® micro output terminal

(Type D)

Introduction

Operating Controls

This section explains about operating controls.

The icons in parentheses are used in the descriptions of this manual.

12 3

1 Mode dial

Changes the capture mode. (p.44)

2 Shutter release button (z)

Press to capture images.

Press halfway to activate autofocus. (p.42)

3 Power button

Turns the power on or off. (p.39)

4 ADJ./MEMO button (n/y)

Calls ADJ. mode functions and sets the camera

memo. (p.23, p.69)

5 Flash/Left button (l/c)

Changes the flash mode. (p.54)

Moves the cursor to the left when an item is

selected.

Introduction

6 Focus/Down button (s/b)

Changes the focus mode. (p.49)

Moves the cursor down when an item is se-

lected.

7 MENU button (f)

Displays a menu. Press this button while the

menu is displayed to return to the previous

screen. (p.24)

8 Fn//Delete button (h/i)

Calls the assigned function. (p.23)

In the playback mode, press to delete images.

(p.43)

9 Zoom button (4 (T)/5 (W))

Changes the zoom magnification. (p.42)

10 Drive/Up button (w/a)

Changes the drive mode. (p.58)

Moves the cursor up when an item is selected.

11 Playback button (g)

Switches between the shooting mode and the

playback mode. (p.43)

12 GPS/Right button (x/d)

Press and hold to turn the GPS function on or

off. (p.114)

Moves the cursor to the right when an item is

selected.

13 OK button (e)

Switches the information displayed on the

shooting screen and playback screen. (p.20)

Confirms the selected items when setting a

function.

Introduction

1 Drive mode (p.58)

2 Motion blur reduction/Movie SR (p.65)

3 Focus mode (p.49)

White balance

(p.56)

5 Image tone (p.63)

6 Electronic compass information (azimuth)

(p.117)

7 Electronic compass direction

8 AE metering (p.52)

9 Flash mode (p.54)

10 GPS positioning status (p.114)

11 Bluetooth® communication (p.96) *

12 Wireless LAN communication (p.96) *

13 NFC (p.128) *

14 FlashAir communication status (p.35)

15 Recorded pixels (p.62)

16 Aspect ratio (p.62)

17 Camera shake warning

18 Number of storable images

19 Image clip (p.77)

20 Face detection (p.50)

21 Highlight correction (p.65)

22 Zoom magnification (p.42)

23 Digital zoom (p.43)

24 Shadow correction (p.65)

25 GPS information (p.114)

26 GPS positioning quality

27 Zoom bar/Focus bar (p.42, p.51)

28 Date imprint (p.64)

29 World time (p.124)

30 Storage location (p.35)

31 GPS log (p.115)

32 Conversion lens (p.133)

33 Edit detection (p.67)

34 Image composition (p.77)

35 GPS lock (p.115)

36 Focus frame

37 Camera memo (p.69)

38 Histogram

39 Capture mode (p.44)

40 Grid guide (p.109)

41 Shutter speed

42 Operation guide

43 Aperture value

44 Electronic level (p.109)

45 External range finder information (p.100) *

46 ISO setting (p.53)

47 Date and time (p.40)

48 Save destination folder (p.118)/

Number of files

Indicators on the Monitor

Shooting Screen

F5.5 EV-2.06400

99999

1/400

4.1x

128° ESE

E:139° 999.9m

N:35°

X 3 (4)

1100RICOH

10:10MAY 05 2019

Exit

45 8

15 19

18171614

4739

40 41 43 44 45 46 48 5049

1310

1211

0:58´58˝

Still image mode Movie mode

Introduction

49 Exposure compensation (p.46)

50 Battery level (p.20)

51 Recording indicator

52 Recording time/Remaining recording time

*1 G900SE only

Playback Screen

99998 99999

100-0630

EV+0.71/2400 F5.5

250

10:00MAY 05 2019

13 15 16 17 18

9998/9999

00´ 20˝

999-9999

10:00MAY 05 2019

Still image mode Movie mode

1 Shooting date and time

2 Image protection (p.85)

3 GPS information (p.114)

4 Bluetooth® communication (p.96) *

5 Wireless LAN communication (p.96) *

6 Recorded pixels (p.62)

7 Current file/Total files

8 Data source

9 Face detection (p.50)

10 Edit detection (p.67)

11 Image clip (p.77)

12 Camera memo (p.72)

13 Folder number/File number (p.118)

Shutter speed

15 Aperture value

16 ISO setting

17 Exposure compensation

18 Battery level (p.20)

19 Length of time of the recorded movie/

Elapsed time

20 Operation guide

*1 G900SE only

Introduction

Battery Level

The icon display changes depending on the battery level.

The battery level is sufficient.

The battery level started to drop.

The battery level is low. Charge the battery.

The camera will turn off soon.

There is a problem with the battery.

Changing the Screen Display

You can switch the information displayed on the screen by pressing e.

Shooting Mode

The information displayed on the shooting screen can be switched.

Standard information display Displays the standard information such as shooting settings and electronic

level.

Detailed information display Displays the standard information, electronic compass information, and GPS

information.

Grid guide display Displays the grid guide.

No information display Displays the autofocus frame during range-finding.

Display off Displays the autofocus frame and Live View only when z is pressed

halfway.

Memo ---------------------------------------------------------------------------------------------------------

• The grid style can be selected in [Grid Guide Display Op.] of the D menu. (p.109)

Introduction

Playback Mode

You can switch the screen display between “Standard information display”,

“Detailed information display”, and “No information display” in the single

image display.

Use ab to switch the page in “Detailed information display”.

99998 99999

5184x3888

100-0630

1/2400 F5.5 EV+0.7

6400

1/2400 F5.5 EV+0.7

6400

00:00´23˝

35.0mm

99998 99999

XXXXXXXXXXX

100-0630

42m

N 35°

E138°

123° ESE

10:10:01

10:0010:00 MAY 05 2019MAY 05 2019

MAY 05 2019

Memo ---------------------------------------------------------------------------------------------------------

• The displayed information differs between still images and movies.

• For images to which the following functions have been set, the content of each function is displayed

after “No information display”.

• Camera Memo (p.68)

• Watermark Options (p.73)

• Image Clip (p.75)

Introduction

How to Change Function Settings

Using the Button

Using the Direct Keys

Quick settings are possible by pressing abcd in

the shooting mode. The following functions can be

activated.

a (w) Drive Mode (p.58)

b (s) Focus Mode (p.49)

c (l) Flash Mode (p.54)

Press and hold d (x) GPS On/Off (p.114)

Memo ---------------------------------------------------------------------------------------------------------

• The functions mentioned above can be set from the menu by pressing f.

Introduction

Using the ADJ. Button

The registered functions can be easily recalled by pressing n.

When [Camera Memo] is set to [On] in the F menu, change the setting to

[Off], and then use n. (p.69)

1 Press n in the shooting mode.

The mode switches to the ADJ. mode and the

icons for the assigned functions appear.

2 Use cd to select a function.

The five functions assigned to the button can

be selected.

3 Press e.

The selected function is set and the camera is ready to perform shooting.

Memo ---------------------------------------------------------------------------------------------------------

• The ADJ. mode functions can be changed in [ADJ Button Setting 1] to [ADJ Button Setting 5] of the

D menu. (p.107)

Using the Fn Button

The registered function can be activated by

pressing h in the shooting mode.

By default, [Outdoor View] is activated when

h is pressed. (p.110)

Memo ---------------------------------------------------------------------------------------------------------

• The function of h can be set in [Fn Setting] of the D menu. (p.108)

3648x2736

Recorded Pixels

Introduction

Setting from the Menus

Most functions are set from the menus.

1 Press f.

The A menu appears.

The menu displayed differs depending on the camera status.

2 When changing the menu type, press

c, and use ab to select a type.

Shooting menu (p.26)

This menu is displayed only in the shooting mode.

Movie menu (p.27)

This menu is displayed only in the shooting mode.

Playback menu (p.28)

This menu is displayed only in the playback mode.

D Customize menu (p.29)

E Setup menu (p.30)

F Expanded Settings menu (p.31)

Network menu (p.32)

This menu is displayed only for G900SE.

3 Press d.

4 Use ab to select a function to set,

and press d.

The settings for the selected setting item are

displayed.

1/4

125 - 1600

AUTO

Auto Macro

Focus Assist

AE Metering

Setting

AUTO Range

Focus

Shooting

Standard

Multi

Divide

ExitExit

3/5

Power Saving

Outdoor View

Power Button Lamp

Operation Volume

Playback Volume

Sound

LCD Brightness

Setup

5sec.

O

ExitExit

Introduction

5 Use ab to select a setting, and

press e.

The screen in Step 4 reappears.

Press f to return to the previous screen.

When you have finished setting, press f

several times to return to previous screens.

Memo ---------------------------------------------------------------------------------------------------------

• When f is pressed, the top screen of the A menu or C menu appears. To display the last used

menu screen first, set [Cursor Position Keeping] to [On] in the E menu.

• You can make settings so that the menu is displayed only when f is pressed and held for about 2

seconds to prevent misoperation. The settings can be made in [Menu Button Setting] of the F menu.

• The setting is saved even after the power is turned off. To reset the menu settings, select a menu type

to reset in [Initialized Setting] of the E menu, and execute [Reset] in the E menu.

• You can set a password so that other people cannot change camera settings. (p.129)

3/5

Power Saving

Outdoor View

Power Button Lamp

Operation Volume

Playback Volume

Sound

LCD Brightness

Setup

5sec.

O

OKOK

Introduction

Menu List

The following menus are available. (The underlined settings and the

square-bracketed settings are the default settings.)

A Shooting Menu

Focus Standard, Macro, 1cm Macro, PF, Infinity, MF p.49

Multi, Spot, Tracking p.50

Auto Macro

On, Off p.49

Focus Assist

On, Off p.50

AE Metering

Divide, Center, Spot p.52

Setting

AUTO, 125 to 25600 p.53

AUTO Range

125 - 200, 125 - 400, 125 - 800, 125 - 1600, 125 - 3200,

125 - 6400

EV Comp. -2.0 to +2.0 p.46

Flash Mode

Auto, Flash Off, Flash On, Auto+R. eye, On+Red-eye, Ring

Light

p.54

White Balance

Auto WB, Daylight, Shade, Cloudy, Fl. DL Color, Fl. DL White, Fl.

Cool Wt., Fl. Warm Wt., Tungsten, Ring Light, Manual WB

p.56

Pix. Track SR

On, Off p.65

Face Detection

On, Smile, Assist, Assist+Smile, Off p.50

Blink Detection

On, Off p.42

Digital Zoom

On, Off p.43

Drive Mode

Off, Self-timer, Cont. Shoot, Burst Shoot, M-Cont, S-Cont,

Remote Ctl, A-Bracket

p.58

Ring Light

Select: All, Right, Left, High, Low, Off

Brightness: 1 to 9 [5]

LightningTime: Always On, Shutter 10s, Shutter 20s, Shutter

30s, Shutter 60s

p.55

Recorded Pixels

L, M, S, XS, VGA p.62

Aspect Ratio

4:3, 3:2, 1:1

Quality Level

8, 9, 0

Image Tone

Bright, Natural, Vibrant, Slide Film, Monochrome p.63

D-Range Setting

Highlight Cor.: Auto, Off

Shadow Cor.: Auto, Off

p.65

Introduction

Sharpness Soft, Standard, Hard p.64

Saturation

Soft, Standard, Hard

Tone Adjustment

Blue, Black & White, Sepia

Contrast

Soft, Standard, Hard

Date Imprint

Date, Date & Time, Time, Off p.64

IQ Enhancer

On, Off p.64

B Movie Menu

Recorded Pixels 4K 30fps, FullHD 30fps, HD 60fps, HD 30fps p.62

HDR

On, Off

Microphone

On, Off

Wind Suppression

On, Off

Movie SR

On, Off p.65

Movie SR+

On, Off

Introduction

C Playback Menu

Image Copy [Internal M]>>>[Card], [Card]>>>[Internal M] p.84

Protect 1 File, Sel. Multiple, Select All, Cancel All p.85

Rotation 0°, 90° (counterclockwise), 180°, 90° (clockwise) p.81

Slideshow

Interval: 30sec., 20sec., 10sec., 5sec., 3sec.

Screen Effect: Wipe, Checker, Fade, Random, Off

Sound Effect: On, Off

p.80

Recover File — p.84

Resize Recorded Pixels: L, M, S, XS, 2M, 1M, VGA

Quality Level: 8, 9, 0

p.86

Cropping — p.87

Filter

Small Face Filter: 5%, 7%, 10%

Ink Rubbing Filter: 1 to 5

Digital Filter: B&W/Sepia, Toy Camera, Retro, Color, Extract

Color, Color Emphasis, High Contrast, Starburst, Soft, Fish-eye,

Miniature, Brightness

HDR Filter

p.88

Movie Edit Save as Still Image, Divide Movies, Adding title picture p.89

Red-eye Edit — p.91

Start-up Screen

Start-up screen with operation guide, RICOH, Photographs, Off p.109

Auto Image Rotation

On, Off p.81

Skew Correction — p.66

File Send

(G900SE only)

— p.101

Introduction

D Customize Menu

Reg. USER U1, U2 p.105

CALS Pixels

L, M, S, XS, 2M, 1M, VGA p.44

CALS Quality

8, 9, 0

ADJ Button Setting 1

ADJ Button Setting 2

ADJ Button Setting 3

ADJ Button Setting 4

ADJ Button Setting 5

Off, EV Comp. [Setting1], Recorded Pixels [Setting2], Aspect

Ratio [Setting3], Setting [Setting4], White Balance [Setting5],

Image Tone, Quality Level, AE Metering, AF, Face Detection,

Highlight Cor., Shadow Cor., Outdoor View

p.107

Fn Setting

Off, EV Comp., Recorded Pixels, Quality Level, Aspect Ratio,

White Balance, Setting, AF, Face Detection, Auto Macro, AE

Metering, Highlight Cor., Shadow Cor., Sharpness, Saturation/

Tone Adjustment, Contrast, Outdoor View

p.108

START DATE/TIME

On, Off p.109

Show folder at startup

On, Off

Shut-down Screen

On, Off

Confirm. Time

0.5sec., 1sec., 2sec., 3sec., HOLD, Off p.42

Quick Zoom

On, Off p.43

Grid Guide Display Op.

W, X, Y p.109

GPS

On, Off p.114

GPS Disp Mode

LAT/LON, UTM, MGRS

GPS Lock

On, Off

GPS Time Adjustment

On, Off p.115

GPS Log Record log: Logging Interval, Logging Duration

Save log data: NMEA, KML

Discard log data

p.115

Compass Heading

Off, Cardinal, Degrees, Cardinal/Deg. p.117

Compass Calibration —

Declination

TRUE, MAG

Level Setting

Off, Level + Shift, Level p.109

Calibrate Level Reset

Calibration

Data Imprint

GPS Data Imprint: LAT/LON, UTM, MGRS, Off

UTC Data Imprint: On, Off

Heading Data Imprint: On, Off

p.117

Lens Adapter On

Off, WIDE p.133

Introduction

E Setup Menu

Format [Card] — p.40

Format [Internal M] —

New folder options

Standard, Date, Custom p.118

File name

Standard, Custom p.120

File Sequence No.

On, Off p.121

Reset File Number — p.121

Embed Info

On, Off p.122

On(OVR), On(New), Off p.123

Left, Middle, Right

Large, Middle, Small

Orange, White, Black, Red, Blue, Green, Yellow

Guide Display

On, Off p.46

Cursor Position Keeping

On, Off p.25

LCD Brightness -4 to +4 p.110

Power Saving

Off, 5sec., 15sec., 30sec., 1min., 2min. p.111

Outdoor View -2 to +2 p.110

Power Button Lamp

On, Off p.110

Operation Volume Off, 1 to 5 [3] p.110

Playback Volume Off, 1 to 8 [5]

Sound Startup Sound, Shutter Sound, Operation Sound, Self-timer

Sound

Auto Power Off

1min., 3min., 5min., 10min., 30min., Off p.111

Monitor Auto off Delay

Off, 1min., 5min., 30min. p.111

Power Button Hold Op.

On, Off p.39

Certifications — p.3

Version Info — —

Camera Settings File

Write, Read p.106

USB Connection

MSC, MTP, CD-ROM p.92

HDMI Out

AUTO, 2160P (4K), 1080i, 720P, 480P p.82

FlashAir Connection

On, Off p.35

Introduction

Language/H English, French, German, Spanish, Portuguese, Italian, Dutch,

Danish, Swedish, Finnish, Polish, Czech, Hungarian, Turkish,

Greek, Russian, Thai, Korean, Traditional Chinese, Simplified

Chinese, Japanese

p.40

Date Adjustment Date Format: Y/M/D, D M Y, M D Y

Date: January 1, 2019 to December 31, 2045

Time: 00:00 to 23:59

p.40

World Time

World Time: Hometown, Destination

Hometown: City, DST

Destination: City, DST

p.124

Initialized Setting Still, Movie, Playback, Customize, Setup, Quality p.25

Reset —

F Expanded Settings Menu

Camera Memo Options On, Off p.68

Camera Memo Mode

Mode1, Mode2, Mode3, Mode4 p.125

Memo Skip

Item 1, Item 2, Item 3, Item 4, Item 5

Mark Memo Added

On, Off

Remove Memo Marking —

Memo Warning

On, Off

Memo at Startup

On, Off

Memo Increment

On, Off

Camera Memo Imprint

On, Off

Memo 1 Auto Delete

On, Off

Memo Overwrite

On, Off

10 Keyboard

On, Off

Barcode Mode

Mode1, Mode2, Mode3, Mode4, Mode5, Mode6, Mode7,

Mode8

p.126

Barcode Type

AUTO, 1D Barcode, QR Code, Micro QR, DataMatrix, PDF417,

Micro PDF417, MaxiCode, EAN.UCC, Aztec

Scan Time

3sec., 6sec., 9sec., 12sec., 15sec., 18sec., 21sec., 24sec., 27sec.,

30sec.

Barcode LED

On, Off

Set/Edit User PW

Keyboard, Barcode, NFC (G900SE only) p.129

Camera User Lock Op.

Off, Camera, Int. Memory, SDWO (G900SE only), Menus, USB p.130

Introduction

Set/Edit Admin. PW Keyboard, Barcode, NFC (G900SE only) p.129

Camera Admin. Lock

Off, Camera, Int. Memory, SDWO (G900SE only), Menus, USB,

WEB (G900SE only)

p.130

PW Validity Period

Off, 1min., 15min., 30min., 60min. p.132

Set/Edit SD Card PW — p.131

Card PW Unlock Time

Off, 1min., 15min., 30min., 60min. p.132

Image Clip

Image Clip: On, Off

Flag Function Quality: 3M, 2M, 1M, VGA

p.75

Board

On, Off p.71

Image Composite Sett.

Image Composite Sett.: Off, Board, Image Clip

Composite Position: Upper Left, Upper Right, Bottom Left,

Bottom Right

Composite Size: Large, Middle, Small

p.77

Edit Detection

Off, On p.67

Restore Defaults

Reset: On, Off

Size: L, M, S, XS, 2M, 1M, VGA

Aspect Ratio: 4:3, 3:2, 1:1

Quality Level: 8, 9, 0

p.62

Menu Button Setting

On, Off p.25

Skew Correct Frame

On, Off p.66

Template — p.73

Transparency

80%, 60%, 40%, 20% p.74

G Network Menu (G900SE Only)

Communication Mode Off, Wireless LAN, Bluetooth, WLAN/BT p.96

Import Com. Setting — p.98

Send To Network

Wireless LAN Setting

FTP/FTPS Server Options

Web Server Options

Auto Update Server Options

802.1x Authentication

Send Status

On, Off

Simple Connection

Off, WPS Button, WPS PIN, Scan, Connection Inf

OSS Information — —

Introduction

Bluetooth Connection BLE, Classic p.100

Bluetooth Serial —

Bluetooth Pass Key —

Bluetooth Search Ct 1 to 10 [5]

Bluetooth SPP Conn

On, Off

Bluetooth Mas/Sla

Master, Slave

Bluetooth PF

OPP, BIP, OPP/BIP

Bluetooth Shutter

On, Off p.97

Bluetooth Device Sett.

Off, BC Reader, GPS, Range finder p.100

Range Finder Mode

Mode1, Mode2 , Mode3

Quick Send Mode

Off, 1Touch, 2Touch, AUTO p.102

Image File Size

Off, 1/2, 3M, 2M, 1M, VGA p.96

Auto Delete

On, Off

Transmit Power Off

Off, Still, Still/Movie

Connection Power On

On, Off

NFC

On, Off p.128

NFC Setting

Security: On, Off

DB Co-op: On, Off

Server Sync.

Synchronize Clock: Off, On, Manual

Update Firmware: Off, On, Manual

Update Settings: Off, On, Manual

p.103

Support

Create Log File: On, Off

Append CRC: On, Off

Number of Retries: Off, 1 Retry, 2 Retries, 3 Retries, 4 Retries,

5 Retries

AP Connection Timeout: Off, 15sec., 30sec., 60sec., 90sec.

PING

Operation Log: On, Off

Retain WLAN Conn.: On, Off

p.103

Getting Started

Setting the Battery and a Memory Card

Inserting the Battery and a Memory Card

SD memory cards, SDHC memory cards, and SDXC memory cards can be

used with this camera. “Memory card” refers to these memory cards in this

manual.

1 Make sure that the camera power is off.

2 Slide the release lever on the bottom

of the camera toward OPEN, and slide

the battery/card cover to the right to

open it.

3 Make sure that the memory card is

facing the right way and then push

the card all the way in until it clicks.

To remove it, press in the memory card and

then release your hand.

4 Insert the battery.

Use the rechargeable battery (DB-110) to

press the latch and insert the battery all the

way into the battery compartment.

To remove the battery, slide the latch.

5 Close the battery/card cover and slide

it to the left.

Slide the battery/card cover until it clicks and

confirm that it is closed securely.

Getting Started

Caution -------------------------------------------------------------------------------------------------------

• When opening and closing the battery/card cover, be sure to remove water and dirt such as sand

adhering to the camera, and avoid locations where dirt can enter the camera interior.

• Close the battery/card cover securely. If the battery/card cover is not closed securely, water or dust

may enter the camera interior.

Data Storage Location

Images captured and movies recorded with this camera are saved in the in-

ternal memory or a memory card.

Memo ---------------------------------------------------------------------------------------------------------

• Saved images can be copied between the internal memory and the memory card. (p.84)

• The storage capacity varies depending on the memory card. (p.146)

FlashAir Card ------------------------------------------------------------------------------------------------

• An SD memory card with a built-in wireless LAN function (FlashAir card) can be used with the camera.

When communicating using the FlashAir card, set [FlashAir Connection] to [On] in the E menu. If

the write-protect switch of the FlashAir card is locked, the settings cannot be made.

• Use of an access point and an Internet connection are required for transferring images via a wireless

LAN. For details, refer to the card manufacturer’s website, etc.

• The operability of FlashAir card functions including the wireless transmission function is not guaran-

teed with this camera. Contact the FlashAir card manufacturer regarding any malfunctions or prob-

lems concerning FlashAir cards. FlashAir cards can be used only in the country in which the card was

purchased. For details, contact the FlashAir card manufacturer.

Getting Started

Tamper-proof Card -----------------------------------------------------------------------------------------

• For the G900SE, the tamper-proof card can be used.

• Once you have recorded images in the tamper-proof card, you cannot perform the following oper-

ations.

• Delete

• Image Copy

• Protect

• Recover File

• Resize

• Cropping

• Filter

• Movie Edit

• Red-eye Edit

• Skew Correction

• Format

• A limited number of folders can be created in a tamper-proof card. For the number of folders and files

that can be created, contact the card manufacturer.

• The files in the tamper-proof card cannot be copied to a computer via a USB cable.

Getting Started

Charging the Battery

Charge the provided rechargeable battery DB-110 before using the camera.

Use the provided USB cable, USB power adapter, and power plug to charge

the battery with the battery charger or camera.

1 Insert the power plug to the USB

power adapter.

Insert it until it clicks into place.

2 Insert the battery to the battery

charger, and connect the USB cable to

the USB terminal.

When charging the battery with the camera,

open the battery/card cover, and connect

the USB cable to the USB terminal with the

battery inserted.

Getting Started

3 Connect the USB cable to the USB

power adapter.

4 Plug the USB power adapter into a

power outlet.

The indicator lamp of the battery charger or

the power button lamp of the camera turns

on, and charging starts.

Depending on the battery level, the charging

time differs.

When charging is complete, the indicator

lamp or power button lamp turns off.

5 Remove the USB cable from the USB terminal, and close the

battery/card cover.

6 Unplug the USB power adapter from the power outlet.

Storage Capacity --------------------------------------------------------------------------------------------

• About 340 pictures can be taken when the battery is fully charged.

• This is based on tests conducted according to CIPA standards under the following conditions: At 23°C

(73°F) temperature; the monitor is on; a picture is taken every 30 seconds; the flash is fired every two

pictures; the camera is turned off and back on after 10 pictures are taken.

• The storage capacity is for reference. For long periods of use, it is recommended that you carry spare

batteries.

Caution -------------------------------------------------------------------------------------------------------

• When opening and closing the battery/card cover, be sure to remove water and dirt such as sand

adhering to the camera, and avoid locations where dirt can enter the camera interior.

• Use only genuine rechargeable battery (DB-110).

• If the battery starts to run down more quickly even after being charged, the battery has reached the

end of its service life. In this case, replace the battery with a new one.

• The battery may become very hot immediately after operation. Turn the camera off and leave it to

cool down sufficiently before removing the battery.

Memo ---------------------------------------------------------------------------------------------------------

• You can also charge the battery by connecting the camera to a computer using the USB cable. (p.93)

Getting Started

Initial Settings

Turn the camera on and make the initial settings.

Turning the Camera On

1 Press the power button.

The power button lamp turns on.

The first time the camera is turned on after

purchase, the [Language/H] screen ap-

pears.

When the power button is pressed again, the

power turns off.

Memo ---------------------------------------------------------------------------------------------------------

• When g is pressed and held with the camera turned off, the camera turns on in the playback mode.

• The power button lamp can be set to [Off] in [Power Button Lamp] of the E menu. (p.110)

• If no operations are made for about one minute (default setting), the camera turns off automatically

to suppress battery drain. The power saving function can be set in the E menu. (p.111)

• The display of the start-up screen can be set in [Start-up Screen] of the C menu. (p.109)

• You can also make settings so that the camera is turned on and off by pressing and holding the power

button to prevent misoperation. When [Power Button Hold Op.] is set to [On] in the E menu, press

and hold the power button for about 2 seconds to turn the camera on, and press and hold for about

5 seconds to turn the camera off.

Protecting the Camera with a Password ---------------------------------------------------------------

• You can set the camera to require a password input when it is turned on. (p.129)

Getting Started

Setting the Language and the Date and Time

You can set the display language for menus and the date and time.

1 Use ab to select a language, and press e.

The selected language is set and the [Date Adjustment] screen appears.

2 Set the display format and the date

and time.

Use cd to select an item and ab to

change the value.

Press f to cancel the setting.

3 Press e.

The date and time are set and the camera is

ready to take a picture.

Memo ---------------------------------------------------------------------------------------------------------

• If the battery is removed for about five days, the date and time settings will be lost. To retain the

date and time settings, insert a battery with sufficient power for at least two hours, and then remove

the battery.

• You can change the language and the date and time settings in the E menu.

Formatting a Memory Card

When using a new memory card or a memory card used with another de-

vice, be sure to format the memory card with this camera. The internal mem-

ory can also be formatted with the same operations.

If a memory card is formatted, the folders required to save camera memos

and communication lists are created.

1 Press f.

The menu appears.

00 0001 ：//

00:00

M D Y 01 2019

Cancel

Date Adjustment

Set the date, time, and format.

JAN 01 2019

Getting Started

2 Press c, and use ab to select E.

3 Press d, select [Format [Card]], and press d.

When formatting the internal memory, select [Format [Internal M]].

4 Use a to select [Execute], and press

The memory is formatted.

5 Press e.

6 Press f.

The shooting screen reappears.

Caution -------------------------------------------------------------------------------------------------------

• Do not remove the memory card while formatting, or the card may be damaged.

• Formatting deletes all data, both protected and unprotected. However, the following files are not

deleted.

• Camera memo file

• Board file

• Camera settings file

• Do not format FlashAir cards with this camera.

1/5

Format [Internal M]

New folder options

File name

File Sequence No.

Reset File Number

Embed Info

Format [Card]

Setup

Standard

O

ExitExit

All data will be erased.

Execute

Cancel

Getting Started

Basic Shooting Operation

Shooting in the Auto Mode

The camera automatically selects the optimal capture mode.

1 Set the mode dial to S.

The capture mode is set to S, and the

Live View is displayed.

2 Use 4 (T)/5 (W) to change the zoom magnification.

The optical zoom up to 5x magnification is available. The digital zoom up to

40.5x magnification is available by further pressing 4.

3 Press z halfway.

The capture mode is selected, and the focus

is adjusted.

When the subject cannot be in focus, the red

frame appears.

4 Press z fully.

The image you have just captured is displayed on the monitor (Instant Re-

view) and saved.

Instant Review and Blink Detection --------------------------------------------------------------------

• You can set the display time of Instant Review in [Confirm. Time] of the D menu. When set to

[HOLD], the Instant Review is displayed until z is pressed halfway or the mode dial is turned.

• If the camera detects that the subject’s eyes are closed, the message [Closed eyes have been detected]

appears during Instant Review. You can also set [Blink Detection] to [Off] in the A menu to disable

this function.

F5.6

400

1/400

Getting Started

Zoom ----------------------------------------------------------------------------------------------------------

• When 4 is pressed and held, the zooming method switches from the optical zoom to the intelligent

zoom. If 4 is release and pressed again, the zooming method switches from the intelligent zoom to

the digital zoom with up to 40.5x magnification. The digital zoom magnification varies depending on

the [Recorded Pixels] settings in the A menu.

• The quality of images captured with the digital zoom slightly deteriorates. You can set whether to use

the digital zoom in [Digital Zoom] of the A menu.

Viewing the Captured Images

Review the captured image on the monitor.

1 Press g.

The camera switches to the playback mode

and the last image you took is displayed. (Sin-

gle image display)

2 View an image.

The following operations are available.

cd Displays the previous or next image.

Press and hold cd Fast-reverses/Fast-forwards playback.

ab Reverses/Forwards playback by 10 frames.

i Deletes the image.

4 (T) Magnifies the image.

5 (W) In magnified view: Reduces the image.

abcd In magnified view: Moves the magnified area.

e Switches the displayed information.

y Displays the camera memo. (p.72)

Memo ---------------------------------------------------------------------------------------------------------

• Movies cannot be magnified.

• When [Quick Zoom] is set to [On] in the D menu, pressing 4 once magnifies the image at the

maximum magnification.

Taking Pictures

Taking Still Images

Setting the Capture Mode

Turn the mode dial to select capture modes.

CALS Mode

Takes images with the recorded pixels and quality level set in [CALS Pixels]

and [CALS Quality] of the D menu. The aspect ratio is fixed to [4:3].

By default, the recorded pixels are set to [1M] and the quality level is set to

[9]. These settings are appropriate to take construction site pictures

submitted to local authorities.

Auto Mode

Takes images with the optimal capture mode automatically selected by the

camera. (p.42)

Program Mode

Takes images with the shutter speed and aperture value automatically set

by the camera.

Scene Mode

Selects a scene from various scenes and takes images with the optimal set-

tings for the selected scene. (p.45)

Digital Microscope Mode

Turns the ring light on for shooting at a close focus distance of 1 cm to the

subject.

The focus mode, flash mode, recorded pixels, and aspect ratio are fixed to

[1cm Macro], [Ring Light], [XS], and [4:3], respectively.

You can fix the distance to the subject to 1 cm by attaching the provided mac-

ro stand (p.13) to the camera.

P/Q

User Mode

Uses the saved shooting settings. (p.105)

Movie Mode

Records a movie. (p.47)

Taking Pictures

Performing Shooting in the Scene Mode

1 Set the mode dial to T.

The mode switches to the T mode.

2 Press f.

The T menu appears.

3 Use abcd to select a scene.

The following scenes can be selected.

Watermark Options (p.73) HDR

Digital SR Interval Shooting

Firefighting Interval Movie

Skew Correction (p.66) High Speed Movie

Text Mode Surf & Snow

Zoom Macro DOF Composite

Remove Haze Image Sync (p.97)

* G900SE only

4 Press e.

The scene is set.

Overlay a template image.

Scene Mode

CancelCancel OKOK

Watermark Options

Taking Pictures

Memo ---------------------------------------------------------------------------------------------------------

• The T menu is displayed only in the T mode.

• When the scene is set to [Interval Shooting] or [Interval Movie], shooting is performed at a fixed in-

terval. You can set [Interval], [Number of Shots] ([Total Time] for [Interval Movie]), and [Start Delay].

• A description of the selected scene is displayed on the screen in Step 3. If you do not want to display

this description, set [Guide Display] to [Off] in the E menu.

Caution -------------------------------------------------------------------------------------------------------

• The functions that can be set vary depending on the scene.

• When the scene is set to [HDR] or [DOF Composite], fix the camera using a tripod, etc. during shooting.

• [Interval Shooting] and [Interval Movie] cannot be selected during the GPS logging. (p.115)

Using Exposure Compensation

1 Select [EV Comp.] in the A menu, and press d.

The [EV Comp.] screen appears.

2 Use ab to select a compensation

value.

The compensation value can be selected in

the range of ±2.0.

3 Press e.

4 Press f.

The shooting screen reappears.

Caution -------------------------------------------------------------------------------------------------------

• The exposure compensation is not available in the S mode.

0.0

EV Comp.

Cancel

Taking Pictures

Recording Movies

1 Set the mode dial to B.

The mode switches to the B mode.

2 Press z halfway.

Autofocus is performed.

3 Press z fully.

Recording starts.

The recording time is displayed while recording.

4 Press z again.

Recording stops.

Caution -------------------------------------------------------------------------------------------------------

• When [Microphone] is set to [On] (default setting) in the B menu, camera operation sounds are

also recorded.

• If the internal temperature of the camera becomes high during recording, recording may be termi-

nated.

• The flash cannot be used in the B mode.

• You can record a movie continuously up to 4 GB or 25 minutes. Recording stops when the memory

card or internal memory becomes full. The maximum recording time per shooting depends on the

capacity of the memory card. (p.146) Shooting may stop even before the maximum recording time

is reached.

• The amount of time remaining is calculated based on the amount of memory available and may not

diminish at an even rate.

• For the memory cards with which proper operation has been confirmed for recording movies, refer

to p.147.

• The use of the battery with sufficient power or the optional AC adapter (K-AC166) is recommended.

Taking Pictures

Playing Back Movies

1 Press g.

An image is displayed in the single image display of playback mode.

2 Use cd to select a movie to play back.

The first frame of the movie is displayed as a still image.

3 Play back a movie.

The following operations are available.

a Plays back/Pauses a movie.

cd Fast-reverses/Fast-forwards playback.

b Stops playback.

4 (T)/5(W) Adjusts the sound volume.

e Switches the displayed information.

Memo ---------------------------------------------------------------------------------------------------------

• The sound volume at the start of movie playback can be set in [Playback Volume] of the E menu.

• In [Movie Edit] of the C menu, you can divide a movie file into multiple segments and add a title

image to a movie. (p.89)

Taking Pictures

Setting the Focus Mode

1 Press s (b) in the shooting mode.

The [Focus Mode] screen appears.

2 Use ab to select a setting.

Standard

Focuses on the subject at a distance of 50 cm or more from the camera when

z is pressed halfway.

When [Auto Macro] is set to [On] (default setting) in the A menu, focus-

ing is also performed for subjects in the macro range.

Macro

Focuses on the subject at a distance of 10 to 60 cm from the camera.

1cm Macro

Focuses on the subject at a distance of 1 to 30 cm from the camera.

Focuses on the entire picture, from the front to the back.

2.5m

Focuses at a distance of 2.5 m.

[2.5m] can be selected only when [Firefighting] is selected in the T

mode.

Infinity

Fixes the focus distance at infinity. This is useful for shooting distant scenes.

Focuses manually. (p.51)

3 Press e.

The shooting screen reappears.

Focus Mode

Standar

Cancel

Taking Pictures

Memo ---------------------------------------------------------------------------------------------------------

• The focus mode can also be set in [Focus] of the A menu.

• The autofocus method for the still image mode can be set in [AF] of the A menu.

Multi Measures the distances from 3 × 3 AF areas and focuses to the nearest

AF area. (Default setting)

Spot Focuses to the center AF area.

Tracking Keeps focusing while z is pressed halfway.

• Faces of people (up to 30 people) are automatically detected during autofocusing. The detection

method can be selected in [Face Detection] of the A menu.

On Detects human faces.

Smile Automatically performs shooting when the subject smiles.

Assist Flashes the ring light when a human face is detected. The position of

flashing ring light LED indicates where the face is detected within the

angle of view.

Assist+Smile Flashes the ring light when a human face is detected and automatically

performs shooting when the subject smiles.

Off Does not detect human faces.

• The AF assist light on the front of the camera lights as necessary during autofocusing. The AF assist

light can be set to [Off] in [Focus Assist] of the A menu.

• When [Firefighting] is selected in the T mode, select the focus mode from [Standard], [2.5m],

[Infinity], and [MF].

Taking Pictures

Focusing Manually (Manual Focus)

If the camera fails to focus automatically, you can focus manually.

The manual focus enables shooting at a fixed distance.

1 Select [MF] in Step 2 on p.49, and press e.

The focus bar appears on the shooting screen.

2 Use ab to set a focus distance.

When e is pressed and held, the center of

the screen is magnified. Pressing and holding

e again restores the normal display.

Memo ---------------------------------------------------------------------------------------------------------

• When changing the focus mode from [MF], change the mode in [Focus] of the A menu.

100

Taking Pictures

Setting the Exposure

Selecting a Metering Method

Set the metering method in [AE Metering] of the A menu.

Divide

Meters exposure in multiple areas of the frame.

Center

Meters exposure with emphasis on the center.

Spot

Meters exposure within a narrow range.

Use this option when metering exposure in a part of an image or when the meter-

ing target subject is small.

Taking Pictures

Setting the ISO Sensitivity

1 Select [Setting] in the A menu, and press d.

2 Use ab to select a setting.

3 Press e.

4 Press f.

The shooting screen reappears.

Memo ---------------------------------------------------------------------------------------------------------

• Values that can be set differ depending on the capture mode. [Setting] cannot be set in the following

T modes.

• [Digital SR], [Firefighting], [Interval Movie], [High Speed Movie]

• [HDR] ([Setting] is fixed to [AUTO])

• For the shooting with [Setting] set to [AUTO] and the shooting in [HDR] of the T mode, the

adjustment range of [AUTO] can be set in [AUTO Range] of the A menu. In the U mode,

[AUTO Range] cannot be set.

Caution -------------------------------------------------------------------------------------------------------

• Images captured with a higher sensitivity may appear grainy.

• Depending on the ISO sensitivity setting, the setting of [D-Range Setting] of the A menu is dis-

abled.

1/4

3200

1600

800

400

200

125

AUTO

Auto Macro

Focus Assist

AE Metering

Setting

AUTO Range

Focus

Shooting

CancelCancel OKOK

Taking Pictures

Using the Flash

1 Press l (c) in the shooting mode.

The [Flash Mode] screen appears.

2 Use ab to select a setting.

Auto

Fires the flash according to conditions.

Flash Off

Does not fire the flash.

Flash On

Always fires the flash.

Auto+R. eye

Fires the flash according to conditions while reducing the red-eye phenom-

enon.

On+Red-eye

Forces the flash to fire while reducing the red-eye phenomenon.

Ring Light

Turns on the ring light around the lens.

3 Press e.

The shooting screen reappears.

Flash Mode

Auto

Cancel

Taking Pictures

Memo ---------------------------------------------------------------------------------------------------------

• The flash mode can also be set in [Flash Mode] of the A menu.

Caution -------------------------------------------------------------------------------------------------------

• You cannot perform shooting while the flash is being charged.

• The flash cannot be used in the B mode.

Using the Ring Light

Select [Ring Light] in Step 2 on p.54 and

press d to set the brightness of the ring light.

The settings for the ring light can be made in

[Ring Light] in the A menu.

Select [All], [Right], [Left], [High], [Low], [Off]

Brightness [1] to [9]

LightningTime [Always On], [Shutter 10s], [Shutter 20s], [Shutter 30s], [Shutter 60s]

Caution -------------------------------------------------------------------------------------------------------

• [Ring Light] cannot be selected in the following cases.

• In the S mode, T mode, or V mode

Ring Light

Cancel

Taking Pictures

Setting the White Balance

Make adjustments to the white balance so that white subjects will appear

white under any kind of light.

1 Select [White Balance] in the A menu, and press d.

The [White Balance] screen appears.

2 Use ab to select a setting.

Auto WB

Adjusts the white balance automatically.

Daylight

Used when shooting in daylight under clear skies.

Shade

Used when shooting in shade.

Cloudy

Used when shooting in daylight under cloudy skies.

Fl. DL Color

Used with daylight fluorescent lighting.

Fl. DL White

Used with neutral white fluorescent lighting.

Fl. Cool Wt.

Used with cool white fluorescent lighting.

Fl. Warm Wt.

Used with warm white fluorescent lighting.

White Balance

Auto

Cancel

Taking Pictures

Tungsten

Used with incandescent lighting.

Ring Light

Used when the ring light of the camera is used.

Manual WB

Set the white balance manually. (p.57)

3 Press e.

4 Press f.

The shooting screen reappears.

Caution -------------------------------------------------------------------------------------------------------

• The white balance may not be adjusted correctly for a subject that is mostly dark.

Setting the White Balance Manually

1 Select [Manual WB] in Step 2 on p.56.

2 Aim the camera at a white subject, such as a sheet of paper,

under the light for shooting.

3 Press h.

An image to be used for white balance ad-

justment is captured.

4 Press e.

5 Press f.

The shooting screen reappears.

White Balance

Manual

Cancel

Taking Pictures

Setting the Drive Mode

You can set the drive mode by pressing w

(a) in the shooting mode.

The drive mode can also be set in [Drive Mode]

of the A menu.

Shooting Using the Self-timer

1 Press w (a) in the shooting mode.

The [Drive Mode] screen appears.

2 Use ab to select a setting.

Self-Timer10s

Releases the shutter about 10 seconds after z is pressed.

Self-Timer 2s

Releases the shutter about 2 seconds after z is pressed.

3 Press e.

The shooting screen reappears.

4 Press z.

The AF assist light blinks during the countdown, and the shutter is released

after about 10 seconds or 2 seconds.

Pressing z halfway during the countdown cancels the self-timer.

Drive Mode

O

Cancel

Taking Pictures

Shooting Continuously

1 Press w (a) in the shooting mode.

The [Drive Mode] screen appears.

2 Use ab to select a setting.

Cont. Shoot

Performs continuous shooting while z is pressed.

Burst Shoot

Fixes the recorded pixels and aspect ratio to [S] and [4:3], respectively, and

performs continuous shooting at high speed.

M-Cont

Performs continuous shooting while z is pressed, and saves last 16

or 25 still images captured for 2 seconds before the button is released as an

image of 5184 × 3888 pixels. (Memory retrospective continuous shooting)

S-Cont

Performs continuous shooting for 16 or 25 still images after z is fully

pressed, and saves them as an image of 5184 × 3888 pixels. (Streaming

continuous shooting)

3 Press e.

The shooting screen reappears.

Caution -------------------------------------------------------------------------------------------------------

• The following functions cannot be used.

• Flash

• [On(New)] in [Copyright Print] of the E menu

• [Image Composite Sett.] of the F menu

• [Cont. Shoot] cannot be selected in the following capture modes.

• S mode

• [Interval Shooting] in the T mode

• B mode

Taking Pictures

Memo ---------------------------------------------------------------------------------------------------------

• The focus setting and exposure value are fixed during continuous shooting.

• The maximum number of images that can be captured continuously varies depending on the [Record-

ed Pixels] setting in the A menu.

• The continuous shooting setting is reset when the camera is turned off and on again.

• If you release z early for [M-Cont], the number of saved images may not reach 16 or 25.

• The images captured with [M-Cont] or [S-Cont] are displayed in 16 or 25 thumbnails in the single

image display of C mode. Press 4 (T) to display an image in the single image display, and cd

to display the previous or next image.

Shooting Using the Remote Control Unit

You can perform shooting using the optional remote control unit.

1 Press w (a) in the shooting mode.

The [Drive Mode] screen appears.

2 Use ab to select a setting.

0s R.Ctl.

Releases the shutter immediately after the shutter release button on the

remote control unit is pressed.

3s R.Ctl.

Releases the shutter about 3 seconds after the shutter release button on the

remote control unit is pressed.

3 Press e.

The shooting screen reappears.

4 Point the remote control unit towards the remote control

receiver of the camera, and press the shutter release button.

Memo ---------------------------------------------------------------------------------------------------------

• The maximum operating distance of the remote control unit is about 4 m from the front of the camera

and about 2 m from the rear of the camera.

Taking Pictures

Shooting with Varied Exposure Values

Takes three images with different exposure settings of -1.0 EV, 0 EV, and +1.0

EV.

1 Press w (a) in the shooting mode.

The [Drive Mode] screen appears.

2 Use ab to select [A-Bracket], and press e.

The shooting screen reappears.

3 Press z.

Three images are captured by pressing z once.

The three images are displayed side by side during Instant Review.

Taking Pictures

Configuring the Capture Settings

Image Capture Settings

Set the file format for still images in the A menu.

Recorded Pixels [L], [M], [S], [XS], [VGA]

Aspect Ratio [4:3], [3:2], [1:1]

Quality Level [8], [9], [0]

Caution -------------------------------------------------------------------------------------------------------

• The settings that can be selected are limited depending on the capture mode.

Memo ---------------------------------------------------------------------------------------------------------

• The image capture settings for the U mode can be made in [CALS Pixels] and [CALS Quality]

of the D menu.

• You can reset the still image capture settings to their default values each time the camera is turned

on. Set the default values and set [Initialized Setting] to [On] in [Restore Defaults] of the F menu.

Movie Capture Settings

Set the file format for movies in the B menu.

Recorded Pixels Sets the number of recorded pixels.

[4K 30fps] (3840 × 2160)

[FullHD 30fps] (1920 × 1080)

[HD 60fps] (1280 × 720)

[HD 30fps] (1280 × 720)

HDR Sets whether to perform the HDR recording.

Microphone Sets whether to record sounds.

Wind Suppression Reduces wind noise during recording.

Memo ---------------------------------------------------------------------------------------------------------

• For the reduction of blurring during recording movies, refer to “Reducing Blurring of Images” (p.65).

Caution -------------------------------------------------------------------------------------------------------

• When [Recorded Pixels] is set to [4K 30fps] or [HD 60fps], [Movie SR+] of the B menu and [HDR]

are fixed to [Off].

• [Movie SR+] of the B menu and [HDR] cannot be set simultaneously.

Taking Pictures

Setting the Image Finishing Tone and Cor-

rection

Setting the Image Atmosphere (Image Tone)

You can control the finishing tone for captured images.

1 Select [Image Tone] in the A menu, and press d.

The [Image Tone] screen appears.

2 Use ab to select a setting.

Bright

Increases the values of [Contrast], [Sharpness], and [Saturation] to take

sharp images.

Natural

Takes images with a natural tone close to the actual color.

Vibrant

Takes bright and gorgeous images with a deep tone of color.

Slide Film

Takes contrast-emphasized images like those captured with a reversal film.

Monochrome

Takes a black and white image.

Set [Tone Adjustment] in the A menu. (p.64)

3 Press e.

4 Press f.

The shooting screen reappears.

Taking Pictures

Setting the Sharpness, Saturation, Tone, and Contrast

The following settings can be made in the A menu.

Sharpness [Soft], [Standard], or [Hard] can be selected.

Saturation [Soft], [Standard], or [Hard] can be selected.

[Saturation] can be set only when [Image Tone] is set to other than [Monochrome]

in the A menu.

Tone Adjustment [Blue], [Black & White], or [Sepia] can be selected.

[Tone Adjustment] can be set only when [Image Tone] is set to [Monochrome] in

the A menu.

Contrast [Soft], [Standard], or [Hard] can be selected.

Imprinting the Date on Still Images

The date can be imprinted at the bottom right of the image based on the

date set in the camera. The date imprinting can be set in [Date Imprint] of

the A menu.

Caution -------------------------------------------------------------------------------------------------------

• The imprinted date cannot be deleted.

• The date cannot be imprinted in the following cases.

• During the shooting in [High Speed Movie] of the T mode

• In the B mode

• When [Drive Mode] is set to [Burst Shoot], [M-Cont], or [S-Cont]

• When [UTC Data Imprint] of [Data Imprint] is set to [On] in the D menu, [Date Imprint] is fixed to

[Off]. (p.117)

Capturing Images with Clearer Details

Images with clearer details can be captured by image processing. Set in [IQ

Enhancer] of the A menu.

Caution -------------------------------------------------------------------------------------------------------

• [IQ Enhancer] is disabled in the following case.

• When [Drive Mode] is set to [Burst Shoot], [M-Cont], [S-Cont], or [A-Bracket]

Taking Pictures

Correcting a Range of Tones (D-Range Setting)

With [D-Range Setting] of the A menu, you can expand an image gradation

to make the bright and dark portions of an image clearly visible.

Highlight Cor. Corrects the bright portions of the image.

Shadow Cor. Corrects the dark portions of the image.

Caution -------------------------------------------------------------------------------------------------------

• When the shooting location is too bright or too dark, the [D-Range Setting] setting may not be ef-

fective.

Reducing Blurring of Images

To automatically reduce blurring of images, set the following functions.

Still image mode [Pix. Track SR] in the A menu

Movie mode [Movie SR] or [Movie SR+] in the B menu

Memo ---------------------------------------------------------------------------------------------------------

• When [Drive Mode] is set to [Self-timer], each setting is fixed to [Off].

• Setting [Movie SR+] to [On] achieves movies with less blurring.

Caution -------------------------------------------------------------------------------------------------------

• [Movie SR] and [Movie SR+] are fixed to [Off] in the following case.

• When [Interval Movie] or [High Speed Movie] is selected in the T mode

• [Movie SR+] is fixed to [Off] in the following cases.

• When [Recorded Pixels] is set to [4K 30fps] or [HD 60fps]

• When [HDR] is set to [On] in the B menu

Taking Pictures

Correcting a Rectangular Subject (Skew Correction)

When shooting a rectangular subject such as a signboard at an angle, you

can correct it as if it were captured from the front before saving it.

1 Set the mode dial to T, and then press f.

2 Select [Skew Correction] in the T menu.

The mode switches to the [Skew Correction] mode.

3 Shoot.

A yellow frame is displayed for the area recognized as the correction target.

If the area cannot be detected, an error message is displayed and the image

before correction is saved.

4 Press d to select the area to be

corrected.

5 Press e.

The images before and after correction are saved respectively.

Memo ---------------------------------------------------------------------------------------------------------

• In the [Skew Correction] mode, the recorded pixels can be set to [S], [XS], or [VGA]. The aspect ratio

is fixed to [4:3].

• When [Skew Correct Frame] is set to [On] in the F menu, a margin is added around the corrected

image.

• The saved still images can be corrected with [Skew Correction] in the C menu.

Caution -------------------------------------------------------------------------------------------------------

• Shoot the entire subject as large as possible.

• The subject may not be recognized in the following cases.

• When the subject is not in focus

• When all sides of the subject are not clearly visible

• When it is difficult to distinguish between the subject and the background

• When the background is complicated

Skew Correction

2nd Corr

Cancel

Finish

Taking Pictures

Detecting Edited Images

If you set [Edit Detection] to [On] in the F

menu before shooting, you can check wheth-

er the captured image has been edited after

shooting using the dedicated software.

For the dedicated software, refer to the RICOH

website.

Caution -------------------------------------------------------------------------------------------------------

• When [Edit Detection] is set to [On], saving images takes longer than usual.

• The image processed and edited in the C menu is judged as an edited image.

• [Edit Detection] is fixed to [Off] in the following cases.

• When [Drive Mode] is set to [Cont. Shoot], [Burst Shoot], [M-Cont], [S-Cont], or [A-Bracket]

• In the B mode

• When an image is captured with [Skew Correction] of the T mode, [Edit Detection] for the

corrected image is set to [Off].

• When [Camera Memo Mode] is set to [Mode4] in the F menu, [Edit Detection] is fixed to [On].

99998 99999

100-0630

EV+0.71/2400 F5.5

250

10:00MAY 05 2019

Taking Pictures

Adding Information to Captured Images

Using the Camera Memo

If you register information such as shooting location and work situation

in advance, you can add the work site information to the captured image

simply by selecting it during shooting. This information is called the “camera

memo”.

Example of the camera memo

Item Name (Memo Item) Description (Options)

Client Company A, Company B, Company C

Construction name Foundation work, Piping work, Interior finish work

Shooting location Outdoors, Entrance, Kitchen, Living room

Photographer (Reading barcode, employee ID card, etc.)

For the images with the camera memo added, you can use the provided soft-

ware to print the images together with registered information and change

the file names to the contents of the camera memo in a batch.

The following procedure explains how to add camera memos during shoot-

ing.

Memo ---------------------------------------------------------------------------------------------------------

• The camera memo information can be created using the provided software “LE2” on a computer.

Transfer the camera memo to the memory card or internal memory in advance. When using a tam-

per-proof card, transfer the camera memo to the internal memory.

• Up to 100 memo items can be registered in one camera memo list, and up to 999 options can be

registered in one memo item.

• For details on the creation of camera memo information and on the provided software, refer to “Op-

erating Manual (for Software)”. (p.94)

Taking Pictures

Capturing Images with the Camera Memo Added

1 Set [Camera Memo] to [On] in the F menu.

Alternatively, press and hold y in the shooting mode.

The memo icon appears.

2 Press y.

The [Camera Memo] screen appears.

If there are multiple camera memo files, the

camera memo used last time is displayed.

When using the displayed camera memo,

proceed to Step 5.

3 Press h.

The [FILE LIST] screen appears.

4 Use ab to select a file, and press

The [Camera Memo] screen reappears.

100

1.0x

xxxxxx

xxxxxx1

1/2Camera Memo

File Name

Item 1

Item 5

Item 4

Item 3

Item 2

1/1

xxxxxx1

xxxxxx2

xxxxxx3

FILE LIST

OKCancel

Taking Pictures

5 Use ab to select an item name, and

press d.

The screen to select the camera memo op-

tions appears.

Pressing and holding d on this screen dis-

plays the screen to enter the camera memo

options.

To set the barcode information to the camera

memo, select a memo item on the [Camera

Memo] screen, and then aim the camera at

the barcode and press c.

6 Use ab to select an option.

To temporarily modify the camera memo op-

tions, press d.

In addition to the options set in the camera

memo file, the following items can be select-

ed.

Temporary You can enter information other than the set options with the camera. The

barcode data can also be read.

Record You can record sounds for up to 30 seconds.

Press z to start recording sounds. Press z halfway (or wait for

30 seconds) to end recording.

No Setting You can add the camera memo without selecting an option.

When [Memo Warning] is set in the F menu, [No Setting] cannot be se-

lected during shooting.

xxxxxx

xxxxxx1

1/2Camera Memo

File Name

Item 1

Item 5

Item 4

Item 3

Item 2

 9 C7

5 6 AC4

1 2 3

0 00 .

InputCancel

Finish

Read Barcode

Reading...

RetryCancel

1/2

xxxxxx

001

002

005

004

003

Item 1

OKCancel

Temporary

Record

Taking Pictures

7 Press e.

The [Camera Memo] screen reappears.

Repeat Steps 5 to 7.

8 Press e.

The camera memo information is set, and the shooting screen reappears.

9 Shoot.

The image is saved with the camera memo added.

Caution -------------------------------------------------------------------------------------------------------

• The camera memo cannot be added if the camera memo file (.mta) is not saved in the memory card

or internal memory.

• Items that can be set with the camera memo differ depending on the setting of [Camera Memo

Mode] in the F menu. When [Camera Memo Mode] is set to [Mode2], only the combination of op-

tions can be selected. You cannot modify the options individually.

• When [Drive Mode] is set to [A-Bracket], the camera memo cannot be added.

Memo ---------------------------------------------------------------------------------------------------------

• For details on the camera operation when the camera memo is set, refer to “Camera Memo Settings”

(p.125).

• If the file name of an image is specified in the camera

memo options and the image is saved in the memory card

or internal memory, you can view the image by pressing

y on the [Camera Memo] screen. The image can be

viewed only when [Camera Memo Mode] is set to [Mode2]

in the F menu.

Board ---------------------------------------------------------------------------------------------------------

• You can create the board information including construction name, etc. in advance to use it during

shooting. The board file can be created using the dedicated software on a computer. Transfer the file

to the memory card or internal memory in advance. For the dedicated software, refer to the RICOH

website.

• When [Board] is set to [On] in the F menu, the board

information is displayed when setting the camera memo.

You can check the board list by pressing h on the [FILE

LIST] screen. Pressing h again displays the board con-

tents.

• You can display the camera memo information on the

board and composite it with the captured image. (p.77)

xxx

01Board Display

Taking Pictures

Checking the Camera Memo Added to the Image

1 Display an image in the single image display of playback mode.

The icon appears on the images with the

camera memo added.

2 Press y.

The [Camera Memo] screen appears.

3 Use ab to check options.

When reading a barcode, press c.

If you do not want to modify the options, pro-

ceed to Step 6.

4 Select the item with options to modify, and press d.

The screen to select options appears.

You can select [Temporary] or [Record] in the same way as during shooting.

5 Press e.

The options of the camera memo are changed, and the screen in Step 3 re-

appears.

6 Press e.

The screen returns to the single image display.

When the options of the camera memo have been changed, the save confir-

mation screen appears.

Caution -------------------------------------------------------------------------------------------------------

• The camera memo added to images cannot be deleted.

Memo ---------------------------------------------------------------------------------------------------------

• You can also switch the camera memo display information by pressing e several times in the single

image display. (p.21)

99998 99999

100-0630

EV+0.71/2400 F5.5

250

10:00MAY 05 2019

xxxxxx

xxxxxx1

1/2Camera Memo

File Name

Item 1

Item 5

Item 4

Item 3

Item 2

Taking Pictures

Capturing Images at the Same Angle (Watermark Op-

tions)

Images can be captured at the same angle while referring to images cap-

tured in the past for the purpose of recording work progress, etc.

1 Set the mode dial to T, and then press f.

2 Select [Watermark Options] in the T menu, and press h.

The F menu appears.

3 Select [Template], and press d.

Images are displayed in the thumbnail view.

4 Select a template image, and press

Up to 99 images can be selected.

Pressing e again cancels the selection.

5 Press h.

The selected image is saved as a template.

6 Press f.

The mode switches to the [Watermark Options] mode, the template image is

displayed semi-transparently.

7 Determine the angle according to the template image and

shoot.

When multiple template images are selected, you can switch the images with

The image is saved with the template image information.

100 99999

FinishSelectCancel

Select image(s)

Taking Pictures

Memo ---------------------------------------------------------------------------------------------------------

• Even when the captured mode is changed, if the mode is switched to the [Watermark Options] mode

again, the same template image is displayed.

• The selected image is saved even when the camera is turned off.

• The transparency of the template image can be set to [80%], [60%], [40%], or [20%] in [Transpar-

ency] of the F menu.

• [Template] and [Transparency] of the F menu are displayed only in the T mode.

Checking the Image

1 Display an image in the single image display of playback mode.

2 Check the image.

Pressing e switches the screen display

between “Standard information display”,

“Detailed information display”, “No informa-

tion display”, and the display in which the

template image and the captured image are

displayed side-by-side.

99998 99999

100-0630

EV+0.71/2400 F5.5

250

Taking Pictures

Attaching an Auxiliary Image (Image Clip)

You can capture an auxiliary image (clip image) before capturing the main

image and attach it when saving the main image.

1 Select [Image Clip] in the F menu, and press d.

2 Set [Image Clip] to [On].

To end the image clip mode, set it to [Off].

3 Set the recorded pixels of the clip image in [Flag Function

Quality].

Select the recorded pixels from [3M], [2M], [1M], and [VGA].

The aspect ratio and quality level is fixed to [4:3] and [9], respectively.

4 Press f twice.

The image clip icon appears.

5 Press h.

The [Shoot Clip Images] screen appears.

6 Capture the clip image.

After the clip image is captured, the image

clip icon turns yellow.

You can check the captured clip image using

You can take the clip image again by press-

ing h again.

100

1.0x

Shoot Clip Images

Cancel

100

1.0x

Taking Pictures

7 Capture the main image.

The clip image is attached to the main image, and they are saved as one file.

Caution -------------------------------------------------------------------------------------------------------

• When [Image Clip] is set to [On], the h functions set in [Fn Setting] of the D menu cannot be

used.

Memo ---------------------------------------------------------------------------------------------------------

• You can also switch the clip image display information by pressing e several times in the single

image display. (p.21)

Taking Pictures

Compositing Images during Shooting

You can composite the small-sized board image or clip image with the cap-

tured image.

1 Select [Image Composite Sett.] in the F menu, and select a

composition method.

Image Composite Sett. Sets the type of composited images.

[Board]: The board image on which the camera memo information is

displayed is composited.

[Image Clip]: The clip image is composited.

Composite Position Sets the display position of the composited board and clip image. Se-

lect the position from [Upper Left], [Upper Right], [Bottom Left], and

[Bottom Right].

Composite Size Sets the size of the composited board or clip image. Select the size

from [Large], [Middle], and [Small].

2 Press f twice.

The image composition icon appears.

3 Capture an image with the method selected in [Image

Composite Sett.].

For details, refer to “Capturing Images with the Camera Memo Added”

(p.69) or “Attaching an Auxiliary Image (Image Clip)” (p.75).

The image before compositing images and

the image composited with the board or clip

image are saved respectively.

100

1.0x

99998 99999

100-0630

EV+0.71/2400 F5.5

250

10:00MAY 05 2019

Taking Pictures

Memo ---------------------------------------------------------------------------------------------------------

• Images can be composited only when the aspect ratio is set to [4:3].

• When [Grid Guide Display Op.] is set to Y in the D menu, the position of the composited board

or clip image is displayed. (p.109)

• When compositing the board with the captured image, set [Board] to [On] in the F menu and trans-

fer the board file to the memory card or internal memory in advance. For details on the creation of

board file and on the provided software, refer to “Operating Manual (for Software)”. (p.94)

Caution -------------------------------------------------------------------------------------------------------

• Images can be composited only in the following [Drive mode] settings.

• [Off] (single frame shooting)

• [Remote Ctl]

• [Self-timer]

Playback Functions

Changing the Playback Method

Displaying Multiple Images

You can display multiple images in the thumbnail view.

1 Press 5 (W) in the single image

display of playback mode.

The images are displayed in 20 thumbnails.

The following operations are available.

abcd Moves the selection frame.

5 (W)/4 (T) Switches between the 20-thumbnail display, the 81-thumbnail display, and

the folder (calendar) display.

h Switches between the folder display and the calendar display.

i Deletes the selected image. (p.83)

2 Press e.

The selected image is displayed in the single image display.

Memo ---------------------------------------------------------------------------------------------------------

• Images are played back in the order of file numbers automatically assigned to them.

LAST FILE

100-0630

1/60 F3.5 EV+0.5

125

10:00MAY 05 2019

Playback Functions

Playing Back Images Continuously (Slideshow)

1 Select [Slideshow] in the C menu, and press d.

The [Slideshow] screen appears.

2 Set the image switching interval and screen effects.

Interval Sets the image switching interval.

[Interval] cannot be set when [Screen Effect] is set to [Random].

Screen Effect Sets the screen effects applied when images are switched.

Sound Effect Sets the sound effects.

[Sound Effect] is fixed to [Off] when [Screen Effect] is set to [Random].

3 Select [Start], and press e.

A slideshow starts.

When e is pressed, the slideshow pauses/resumes.

When any other button is pressed, the slideshow stops.

Playback Functions

Displaying Rotated Images

You can change image rotation information.

1 Display an image in the single image display of playback mode.

2 Select [Rotation] in the C menu, and press d.

3 Select the rotation direction, a press

Caution -------------------------------------------------------------------------------------------------------

• Rotation direction cannot be changed when the write-protect switch on the memory card is locked

or for the following images.

• Movies

• Images captured with [M-Cont] or [S-Cont]

• Protected images

Auto Image Rotation --------------------------------------------------------------------------------------

• When [Auto Image Rotation] is set to [On] in the C menu, the displayed image is rotated accord-

ing to the camera’s orientation during the single image display. When [Auto Image Rotation] is set

to [Off] (default setting), the image display orientation is fixed regardless of the [Rotation] setting.

• The following images cannot be rotated.

• Movies

• Images captured with [M-Cont] or [S-Cont]

• The images are not rotated in the following cases.

• During a slideshow

• While an AV device is connected to the camera

Rotation

Cancel OK

Playback Functions

Connecting the Camera to an AV Device

Connect to an AV device, such as TVs, equipped with an HDMI® terminal to

display Live View images while shooting or to play back images.

Prepare a commercially available HDMI® cable that is suitable for the device

connected to the camera.

1 Turn the AV device and camera off.

2 Open the battery/card cover of the

camera, and connect the HDMI® cable

to the HDMI® micro output terminal.

3 Connect the other end of the HDMI® cable to the input terminal

on the AV device.

For details, refer to the operating manual for the AV device.

4 Turn the AV device and camera on.

Caution -------------------------------------------------------------------------------------------------------

• When opening and closing the battery/card cover, be sure to remove water and dirt such as sand

adhering to the camera, and avoid locations where dirt can enter the camera interior.

• While the camera is connected to an AV device, nothing is displayed on the camera monitor.

• The audio of the movie is output from the AV device. Adjust the volume on the AV device.

• Use an HDMI® cable with a length of 3 m or less (recommended product: RP-CHEU15-K manufactured

by Panasonic). The RICOH HDMI cable HC-1 cannot be used.

Memo ---------------------------------------------------------------------------------------------------------

• If the camera is connected to an AV device in the playback mode, an image is displayed in the single

image display.

• When outputting images to an AV device with an HDMI® terminal, the maximum resolution sup-

ported by both the AV device and camera is automatically selected. If the AV device fails to play back

images properly, change the setting in [HDMI Out] of the E menu.

Playback Functions

Organizing Files

Deleting Files

1 Press i in the single image display or multiple image display.

2 Select the deletion method, and press e.

Available deletion methods vary depending on the camera status when i

is pressed.

Single image display [Delete One], [Delete Multi], or [Delete All] can be selected.

When [Delete Multi] is selected, select [Sel. Indiv.] or [Sel. Range].

20-thumbnail display or

81-thumbnail display

[Sel. Indiv.] or [Sel. Range] can be selected.

When [Delete All] is selected, proceed to Step 5.

3 Select the images to delete.

abcd Moves the selection frame.

e Selects/Deselects an image.

When [Sel. Range] is selected: Selects the starting or ending point for image se-

lection range.

4 Press i.

The confirmation screen appears.

5 Select [Execute], and press e.

The selected images are deleted.

100 99999

10:00

Sel/Cancel

Delete

MAY 05 2019

Playback Functions

Caution -------------------------------------------------------------------------------------------------------

• The following images cannot be deleted.

• Protected images

• Images set as [Template] in [Watermark Options] of the T mode

Restoring Deleted Files

You can restore the deleted files in [Recover File] of the C menu.

Caution -------------------------------------------------------------------------------------------------------

• The images cannot be restored when the following operations have been performed after deleting

them.

• Turning the camera off

• Switching from the playback mode to the shooting mode

• Executing [Image Copy], [Resize], [Cropping], or [Skew Correction] of the C menu

• Executing [Format [Card]] or [Format [Internal M]] of the E menu

• Changing the camera memo in the C mode

Copying Images

Images can be copied between the internal memory and the memory card.

1 Insert a memory card.

2 Select [Image Copy] in the C menu, and press d.

3 Select the copy method, and press e.

[Internal M]>>>[Card] Copies all images in the internal memory to the memory card.

When the memory card space is insufficient, the images cannot be

copied.

[Card]>>>[Internal M] Copies images in the memory card to the internal memory one by one

after confirming copying of each file.

The file names are automatically changed.

Playback Functions

Protecting Images from Deletion

You can protect images to prevent them from being deleted accidentally.

1 Select [Protect] in the C menu, and press d.

2 Select the protection method.

Select the method from [1 File], [Sel. Multiple], [Select All], and [Cancel All].

When [1 File] is selected, use cd to display the previous/next image.

3 Press e.

When [Sel. Multiple] is selected, proceed to Step 4.

4 Select [Sel. Indiv.] or [Sel. Range].

5 Select the images to protect.

abcd Moves the selection frame.

e Selects/Deselects an image.

When [Sel. Range] is selected: Selects the starting or ending point for image se-

lection range.

6 Press h.

The selected images are protected or unprotected.

Memo ---------------------------------------------------------------------------------------------------------

• If you apply protection to the images that have already been protected, they are unprotected.

Caution -------------------------------------------------------------------------------------------------------

• If [Format [Card]] or [Format [Internal M]] of the E menu is executed, protected images are also

deleted.

100 99999

10:00

Sel/Cancel

Execute

MAY 05 2019

Playback Functions

Editing and Processing Images

You can edit and process captured images.

Caution -------------------------------------------------------------------------------------------------------

• Only images captured with this camera can be edited and processed. Still images saved from movies

cannot be edited and processed.

• If you edit and process images repeatedly, image quality will deteriorate.

Changing the Image Size

Changing the Number of Recorded Pixels (Resize)

1 Display an image in the single image display of playback mode.

2 Select [Resize] in the C menu, and press d.

The [Resize] screen appears.

3 Set [Recorded Pixels] and [Quality

Level] for the resized image.

The smaller size than the setting for shooting

can be selected.

4 Press e.

5 Select [Overwrite] or [Save as], and press e.

The image is saved.

Quality Level

Recorded Pixels

Resize

CancelCancel OKOK

Playback Functions

Cropping Images

You can crop a part of images and then save them.

1 Display an image in the single image display of playback mode.

2 Select [Cropping] in the C menu, and press d.

3 Specify the range to crop.

4 (T)/5(W) Changes the cropping size.

abcd Moves the cropping frame.

4 Press e.

The image is saved as a new image.

1280x960

Cropping

Cancel OK

Playback Functions

Processing Images with Filters

You can process images with filters.

1 Display an image in the single image display of playback mode.

2 Select [Filter] in the C menu, and press d.

The [Filter] screen appears.

3 Use ab to select a filter, and press d.

The following filters can be selected.

Small Face Filter [5%], [7%], [10%]

Ink Rubbing Filter [1] to [5]

Digital Filter [Black & White], [Sepia], [Toy Camera], [Retro], [Color], [Extract Col-

or], [Color Emphasis], [High Contrast], [Starburst], [Soft], [Fish-eye],

[Miniature], [Brightness]

HDR Filter —

When [HDR Filter] is selected, proceed to Step 5.

4 Use cd to specify a value.

For [Digital Filter], use ab to select a filter

type, and then use cd to specify a value.

5 Press e.

6 Select [Overwrite] or [Save as], and press e.

The image is saved.

Digital Filter

oy Camera

Cancel

Playback Functions

Editing Movies

1 Select [Movie Edit] in the C menu, and press d.

The [Movie Edit] screen appears.

2 Use ab to select an editing method.

Save as Still Image Saves the specified frame as a still image.

Divide Movies Divides a movie into two files at the specified devision point and saves

as new files.

Adding title picture Specifies the image to be used as the thumbnail for a movie.

For each editing method, refer to the following.

Saving the Specified Frame as a Still Image

1 Select [Save as Still Image], and press e.

The movie playback screen appears.

2 Display the frame to save.

You can play or pause the movie in the same

manner as when viewing a movie in the play-

back mode.

3 Press e.

The selected frame is saved as a still image.

9998/9999

10:00

00´ 20˝

100-0630

MAY 05 2019

Playback Functions

Dividing a Movie

1 Select [Divide Movies], and press e.

The movie playback screen appears.

2 Display the frame at which you want to divide the movie.

You can play or pause the movie in the same manner as when viewing a mov-

ie in the playback mode.

The dividing point can be specified in 30 frames increments.

3 Press e.

The confirmation screen appears.

4 Select [Divide], and press e.

The movie is divided at the selected frame and saved as new movie files.

Caution -------------------------------------------------------------------------------------------------------

• The movies with a recording time of less than 2 seconds cannot be divided.

Specifying the Image to Be Used as the Thumbnail for a Movie

1 Select [Adding title picture], and press e.

The image selection screen appears.

2 Use cd to select an image.

3 Press e.

4 Specify whether to insert the image at the beginning or at the

end of the movie, and press e.

The image is inserted at the beginning or end of the movie.

Select title picture

Cancel

Playback Functions

Memo ---------------------------------------------------------------------------------------------------------

• The inserted image is displayed for 3 seconds at the beginning or end of the movie.

• When the image is inserted at the beginning of the movie, it is displayed as the thumbnail for the

movie. When the image is inserted at the end of the movie, the thumbnail for the movie is not

changed.

Caution -------------------------------------------------------------------------------------------------------

• When the recording time of the movie reaches 26 minutes with the title image inserted, the image

cannot be inserted.

Correcting Red Eyes in Images

You can correct red eyes in images captured with a flash.

1 Display an image in the single image display of playback mode.

2 Select [Red-eye Edit] in the C menu, and press d.

The image is saved as a new image.

Caution -------------------------------------------------------------------------------------------------------

• The red eyes cannot be corrected for the following images.

• Images in which the camera cannot detect red eyes

• Movies

Using Communications and Network

Using a Computer

You can connect the camera to a computer using the provided USB cable.

Setting the Connection Mode

Set the connection mode in [USB Connection] of the E menu according to

the operation to be performed with a computer.

MSC

(default setting)

The camera is recognized as a device by the computer. Used when copying images

from the memory card or internal memory to a computer. (p.93)

MTP Used when performing shooting by operating the camera from a computer.

(p.95)

CD-ROM Used when installing the PDF or software included in the internal memory of the

camera to a computer. (p.94)

Memo ---------------------------------------------------------------------------------------------------------

• The battery charging starts when the camera is connected to a computer.

• Refer to “Operating Environment” (p.147) for system requirements to connect the camera to a com-

puter and to use the software.

Using Communications and Network

Copying Images to a Computer

1 Set [USB Connection] to [MSC] in the E menu.

2 Turn the camera off.

3 Open the battery/card cover of the

camera, and connect the USB cable to

the USB terminal.

4 Connect the USB cable to the USB port

of the computer.

The battery charging starts.

5 Turn the camera on.

The camera is recognized as a device by the computer.

When a memory card is inserted, the files on the memory card are displayed.

When a memory card is not inserted, the files in the internal memory are

displayed.

6 Copy the captured images to the computer.

7 Disconnect the camera from the computer when the copy is

complete.

8 Remove the USB cable from the camera.

Caution -------------------------------------------------------------------------------------------------------

• When opening and closing the battery/card cover, be sure to remove water and dirt such as sand

adhering to the camera, and avoid locations where dirt can enter the camera interior.

• Do not remove the USB cable while copying images.

Memo ---------------------------------------------------------------------------------------------------------

• You can also import images using the provided software “DL-20”.

• You can make settings to request a password when the camera is connected to a computer with the

USB cable to prevent unauthorized copying of images, etc. (p.130)

Using Communications and Network

Using the Provided Software

The details of the provided software are described in “Operating Manual (for

Software)” included in the internal memory of the camera.

1 Set [USB Connection] to [CD-ROM] in the E menu.

2 Turn the camera off.

3 Connect the camera to the computer with the USB cable.

Refer to “Copying Images to a Computer” (p.93) for how to connect the

camera to the computer.

4 Turn the camera on.

The installer starts up.

5 Click [Browse User’s Manual (Software Version)].

The PDF file of “Operating Manual (for Software)” opens.

Provided Software

The following software is provided with the camera.

DL-20 Used to import images from the camera to a computer.

LE2 Used to create a camera memo list (.mta).

ME2 Used to view images. You can edit the camera memo and print the image and camera memo

together on a sheet.

EX2 Used to rename image files according to the options set in the camera memo.

ST-20 Used to make the detailed wireless LAN settings and create a communication list (.PRM).

(G900SE only)

SR-20 Used to set up a computer as a server dedicated to the camera.

(G900SE only)

For details on how to install and use the software, refer to “Operating Manual

(for Software)”.

Using Communications and Network

Caution -------------------------------------------------------------------------------------------------------

• The provided software is compatible with Windows® only. The operating environment of the software

is as shown below.

• Windows® 10 (32-bit, 64-bit)

• Windows® 8.1 (32-bit, 64-bit)

• Windows® 7 (32-bit, 64-bit)

• Windows Server® 2019 (64-bit)

• Windows Server® 2016 (64-bit)

• Windows Server® 2012 R2 (64-bit)

• Windows Server® 2008 R2 (64-bit)

Operating the Camera with a Computer (G900SE Only)

You can operate the camera from a computer using the optional software

“IMAGE Transmitter 2”.

1 Set [USB Connection] to [MTP] in the E menu.

2 Turn the camera off.

3 Connect the camera to the computer with the USB cable.

Refer to “Copying Images to a Computer” (p.93) for how to connect the

camera to the computer.

4 Turn the camera on.

5 Start “IMAGE Transmitter 2” on the computer.

The IMAGE Transmitter 2 starts up and recognizes the camera.

Memo ---------------------------------------------------------------------------------------------------------

• For details on “IMAGE Transmitter 2”, refer to “User Guide [Operation]” available at the following site.

http://www.ricoh-imaging.co.jp/english/support/download_manual.html

Using Communications and Network

Using the Network (G900SE Only)

You can connect the camera with a server or communication device via Blue-

tooth® or wireless LAN, and transmit and receive data.

Selecting the Communication Method

Select [Wireless LAN], [Bluetooth], or [WLAN/BT] in [Communication Mode]

of the G menu according to the communication device connected wire-

lessly.

The basic operations during wireless connection can be set in the G menu.

Image File Size Sets whether to resize images when transmitting them.

When [Off] is selected, images are transmitted with the original size.

Auto Delete Deletes images from the camera after they are sent to the communication device.

Transmit Power Off Transmits images in a batch when the camera is turned off.

[Transmit Power Off] is available only during the wireless LAN connection.

Connection Power On Automatically connects the camera to the previously connected device when it is

turned on.

Make settings according to the communication method to be used.

• “Setting the Wireless LAN Connection” (p.98)

• “Setting the Bluetooth® Connection” (p.100)

Caution -------------------------------------------------------------------------------------------------------

• The wireless LAN function is disabled in the following case.

• While the camera is connected to a device with the USB cable

• Do not attempt to use the Bluetooth® and wireless LAN functions in a location where the use of wire-

less communication devices is restricted or prohibited, such as on airplanes.

• When using the Bluetooth® and wireless LAN functions, observe local laws and regulations governing

radio communication.

Using Communications and Network

Operating the Camera with a Communication Device

The following functions can be used with the communication device wire-

lessly connected with the camera by using the dedicated application “Image

Sync”.

Remote Photography Displays the shooting screen of the camera on the communication device, and

enables making settings and shooting by operating the communication device.

View Images Displays the images saved in the camera on the communication device and im-

ports them to the communication device.

Synchronize Clock Synchronizes the date and time displayed on the camera with the date and time

settings of the communication device.

Memo ---------------------------------------------------------------------------------------------------------

• Image Sync supports iOS and Android™, and can be downloaded from the App Store or Google Play™.

For the supported operating system and other details, refer to the download site.

• For how to connect the camera to a communication device and details on the Image Sync, refer to

the following website.

http://www.ricoh-imaging.co.jp/english/products/app/image-sync2/

Shooting with a Communication Device

You can perform shooting remotely with the camera by operating a com-

munication device.

1 Set the mode dial to T, and then press f.

2 Select [Image Sync] in the T menu.

The mode switches to the [Image Sync] mode, and the wireless LAN function

turns on.

3 Start the Image Sync on the communication device.

4 Turn on the wireless LAN function of the communication device,

and connect it to the camera.

Shooting with the Image Sync becomes possible.

Using Communications and Network

Memo ---------------------------------------------------------------------------------------------------------

• When the camera is turned off or the capture mode is switched, the wireless LAN connection is can-

celed.

• The camera cannot be operated in the [Image Sync] mode.

Setting the Wireless LAN Connection

Create a list of wireless LAN connection destinations as the “communication

list” with the computer, and connect the camera to a server based on this

communication list.

When the communication list has already been imported, start the setting

procedure from Step 3.

1 Create the communication list using the provided software “ST-

20”, and transfer it to the memory card or internal memory.

For details, refer to “Operating Manual (for Software)”. (p.94)

When the communication list is transferred to the internal memory, proceed

to Step 3.

2 Select [Import Com. Setting] in the G menu, and press d.

The communication list is imported.

If there is no communication list that can be imported, set the file transmis-

sion destination manually in Step 3.

3 Select [Send To] in the G menu,

press d, and use ab to select a file

transmission destination.

You can also check and modify the setting

details by pressing d.

4 Make the [Send Status] settings in the G menu.

On Displays the communication list when transmitting files. Select a file transmission

destination each time.

Off Transmits files to the file transmission destination selected in [Send To].

W/LESS LAN (FTP)

Send To

OKOKCancelCancel

Using Communications and Network

5 Make the [Simple Connection] settings in the G menu.

Off Transmits files to the file transmission destination selected in [Send To].

WPS Button Enables the WPS button connection. If the wireless LAN access point is

equipped with a WPS button, you can connect the camera to the access

point by simply pressing the button.

WPS PIN Enables the WPS PIN connection. When the wireless LAN access point sup-

ports the PIN method, you can connect the camera to the access point by

inputting the PIN code set in the access point.

Scan Searches connectable wireless LAN access points. You can connect the cam-

era to the access point by selecting the connection destination and entering

the network key.

Connection Inf Displays the information of the connected wireless LAN access point.

6 Select [Wireless LAN] or [WLAN/BT] in [Communication Mode]

of the G menu.

Using Communications and Network

100

Setting the Bluetooth® Connection

Make detailed settings in the G menu.

Bluetooth Connection Select the communication mode from [BLE] (Bluetooth Low Energy) and

[Classic].

Bluetooth Serial Connectable Bluetooth® devices are searched and displayed in a list. Select a

connection destination.

Bluetooth Pass Key You can register a passkey for connection with up to 16 alphanumeric char-

acters. If you register a passkey, authentication is performed automatically

when connecting the camera to a Bluetooth® device.

Only one passkey can be registered. When connecting the camera to multiple

devices simultaneously, set the same passkey in all devices.

Bluetooth Search Ct You can set the number of Bluetooth® devices to search simultaneously.

Bluetooth Auto Conn The camera is automatically connected to the previously connected

Bluetooth® device when it is turned on.

Bluetooth Mas/Sla Select [Master] or [Slave].

Bluetooth PF Select the profile from [OPP], [BIP], and [OPP/BIP].

Connecting External Devices

You can use a barcode reader, GPS device, and range finder equipped with

the Bluetooth® function. To use an external device via Bluetooth® connec-

tion, make the following settings in the G menu.

Bluetooth Device Sett. You can select a connection destination device.

Range Finder Mode You can select the display type of the range finder information.

[Mode1]: Always displays the information.

[Mode2]: Displays the information until shooting is performed. The informa-

tion is deleted when shooting is complete.

[Mode3]: Performs shooting automatically when the information is received.

Memo ---------------------------------------------------------------------------------------------------------

• For the external devices supported by the camera, refer to the following website.

http://www.ricoh-imaging.co.jp/english/products/

• When an external GPS device is connected, the GPS function of the camera is disabled.

Using Communications and Network

101

Transmitting Files

You can transmit the captured images selected to the communication de-

vice.

1 Select [File Send] in the C menu, and press d.

The [Send To] screen appears.

2 Select the file transmission

destination.

For the wireless LAN connection, the file

transmission destinations imported in [Im-

port Com. Setting] are displayed. (p.98)

The following operations are available.

n For the Bluetooth® connection: Searches devices again.

d Displays detailed information.

i Deletes the file transmission destination.

3 Press e.

If a passkey is required for the Bluetooth® connection, enter it within 30 sec-

onds.

4 Select [Send One] or [Send All], and press e.

When the camera is in the multiple image display (p.79) before selecting

the C menu, select [Sel. Indiv.] or [Sel. Range], and press e.

Memo ---------------------------------------------------------------------------------------------------------

• Pressing and holding e in the playback mode displays the transmission screen. On this screen, you

can select the transmission method as described in Step 4.

W/LESS LAN (FTP)

Send To

OKOKCancelCancel

Using Communications and Network

102

Sending an Image Immediately after Shooting

You can send an image while the Instant Review is displayed immediately

after shooting. The image is transmitted to the destination previously speci-

fied in [File Send] of the C menu.

Set the transmission method in [Quick Send Mode] of G menu.

Off Does not transmit the image during the Instant Review.

1Touch Transmits the image when e is pressed during the Instant Review. If e is not pressed

within the time set in [Confirm. Time] of the D menu, the image is not transmitted.

2Touch Transmits the image when e is pressed during the Instant Review displayed by press-

ing d after shooting.

[2Touch] cannot be used when [GPS Lock] is set in the D menu.

AUTO Transmits the image without displaying the Instant Review.

The [Image File Size] setting in the G menu is ignored.

Caution -------------------------------------------------------------------------------------------------------

• The image cannot be transmitted during the Instant Review in the following cases.

• In the T mode or B mode

• When [Drive Mode] is set to [Cont. Shoot], [Burst Shoot], [M-Cont], or [S-Cont]

Using Communications and Network

103

Using the Support Functions

You can use the support functions related to the wireless LAN communica-

tion in [Support] of the G menu.

Create Log File Saves camera operation logs and error logs.

Append CRC Adds a CRC to the image when transmitting it.

Number of Retries Sets the number of retries for when the connection to a wireless LAN cannot

be established.

AP Connection Timeout Sets the timeout period for when the connection to a wireless LAN cannot

be established.

PING Transmits a PING entered with the camera keyboard. The response status is

displayed on the screen.

Operation Log Saves the button operation logs in the internal memory.

Retain WLAN Conn. Retains the wireless connection.

Setting the Camera Operations When Using a Dedicated

Server

When a computer is set as the dedicated server (SR-20 server) for the cam-

era with the provided software “SR-20”, you can set the camera operations in

[Server Sync.] of the G menu.

Synchronize Clock You can synchronize the date and time settings of the camera with the ones

of the server when the camera is connected to the SR-20 server.

[Off]: Does not synchronize the date and time settings.

[On]: Synchronizes the date and time settings when the camera is turned on

for the first time in a day.

[Manual]: Synchronizes the date and time settings when d is pressed.

Update Firmware When the camera firmware update data is registered in the SR-20 server, you

can update the camera firmware.

[Off]: Does not update the camera firmware.

[On]: Checks whether the latest firmware update data is registered in the

server when the camera is turned off for the first time in a day. If the update

data is registered in the server, the update execution screen is displayed.

[Manual]: Checks whether the latest firmware update data is registered in the

server when d is pressed. If the update data is registered in the server, the

update execution screen is displayed.

Using Communications and Network

104

Update Settings When the camera memo list, communication list, and camera settings file

are registered in the SR-20 server, you can update the file in the camera by

receiving the files.

[Off]: Does not receive the files.

[On]: Checks whether the latest files are registered in the server when the

camera is turned off for the first time in a day. If the files are registered in the

server, the update execution screen is displayed.

[Manual]: Checks whether the latest files are registered in the server when

d is pressed. If the files are registered in the server, the update execution

screen is displayed.

Memo ---------------------------------------------------------------------------------------------------------

• For details on the provided software, refer to “Operating Manual (for Software)”. (p.94)

• Before executing the above functions, start the software “SR-20” in the server.

Changing the Settings

105

Changing the Settings

Saving Frequently Used Settings

Using the Mode Dial

You can assign frequently used shooting settings to the mode dial P and

Q so that you can easily recall the settings.

The following settings can be saved.

• Capture mode

• A/B menu settings (with excep-

tions)

• A part of D menu settings

• A part of F menu settings

Saving the Settings

1 Set the capture mode and all the necessary settings to save.

2 Select [Reg. USER] in the D menu, and press d.

3 Select [U1] or [U2], and press e.

The settings are saved.

Using the User Mode

1 Set the mode dial to P or Q in the shooting mode.

2 Change the settings as necessary.

Memo ---------------------------------------------------------------------------------------------------------

• The settings changed in Step 2 are not saved in the camera. If the mode dial is turned, the settings

are reset to the saved settings.

Destination to save

current settings?

Changing the Settings

106

Exporting the Settings to a File

You can export the menu settings to a file and save it in a memory card.

The settings can be restored from the exported file. Also, the settings can be

copied to multiple cameras using the exported file.

You can export the settings in a memory card using [Write] and can import

the settings to the camera using [Read] in [Camera Settings File] of the E

menu.

Caution -------------------------------------------------------------------------------------------------------

• The setting file is saved in the “SYSTEM” folder in the memory card with the file name “CAMERA.PRM”.

When [Write] is executed, the old file is overwritten.

• If the memory card is not available for recording, the setting file cannot be saved.

• If [Camera User Lock Op.] or [Camera Admin. Lock] is set to [Camera] in the F menu, the setting file

cannot be loaded. Change the setting to [Off], and then load the setting file.

Changing the Settings

107

Customizing the Button Functions

Registering Functions to the ADJ. Button

You can change the settings for “ADJ. mode” of which functions can be easily

used by pressing n.

Five functions selected from the following functions can be saved. (The

functions indicated with a square-bracketed item are the default settings

for the item.)

• Off

• EV Comp. [Setting1]

• Recorded Pixels [Setting2]

• Aspect Ratio [Setting3]

• Setting [Setting4]

• White Balance [Setting5]

• Image Tone

• Quality Level

• AE Metering

• AF

• Face Detection

• Highlight Cor.

• Shadow Cor.

• Outdoor View

1 Select [ADJ Button Setting 1] to [ADJ Button Setting 5] in the D

menu, and press d.

2 Use ab to select a function, and

press e.

The ADJ. mode function is changed.

Memo ---------------------------------------------------------------------------------------------------------

• Refer to “Using the ADJ. Button” (p.23) for how to use the ADJ. mode.

1/4

CALS Pixels

CALS Quality

ADJ Button Setting 1

ADJ Button Setting 2

ADJ Button Setting 3

ADJ Button Setting 4

Reg. USER

Custumize

O

EV Comp.

Recorded Pixels

White Balance

Image Tone

Aspect Ratio

OKOKCancelCancel

Setting

Changing the Settings

108

Registering Functions to the Fn Button

You can register a function in h.

The following functions can be saved.

Still images

• Off

• EV Comp.

• Recorded Pixels

• Quality Level

• Aspect Ratio

• White Balance

• Setting

• AF

• Face Detection

• Auto Macro

• AE Metering

• Highlight Cor.

• Shadow Cor.

• Sharpness

• Saturation/Tone Adjustment

• Contrast

• Outdoor View (default setting)

Movies

• Off

• Movie SR

• Movie SR+

• White Balance

• AF

• Face Detection

• EV Comp.

• Sharpness

• Saturation/Tone Adjustment

• Contrast

• Outdoor View (default setting)

1 Select [Fn Setting] in the D menu, and press d.

2 Use ab to select a function, and

press e.

The function is saved.

Caution -------------------------------------------------------------------------------------------------------

• The function set to h is enabled in the shooting mode only. Moreover, during shooting with [Image

Clip] set to [On] in the F menu, the function set to h cannot be used.

2/4

Fn Setting

START DATE/TIME

Show folder at startup

Shut-down Screen

Conﬁrm. Time

Quick Zoom

ADJ Button Setting 5

Custumize

Saturation

Contrast

Outdoor View

5sec.

OKOKCancelCancel

O

Changing the Settings

109

Display and Sound Settings

Setting the Start-up Screen

The screen display when the camera is turned on can be set in [Start-up

Screen] of the C menu.

Start-up screen with

operation guide

Displays the capture mode.

RICOH Displays the RICOH logo.

Photographs Displays the selected captured image.

Off Displays nothing.

Setting the Information Displayed when the Camera Is

Turned On/Off

You can set the information displayed when the camera is turned on and off

in the D menu.

START DATE/TIME Displays the current date and time until the camera is operated after it is

turned on.

Show folder at startup Displays the name of the current folder and the number of images in the

folder until the camera is operated after it is turned on.

Shut-down Screen

Displays the RICOH logo and the number of images captured on the day when

the camera is turned off.

Setting the Live View Display

You can set the Live View display in the D menu.

Grid Guide Display Op. Select the grid style from W, X, and Y.

Y is displayed only when [Image Composite Sett.] is set in the F menu.

The size of the composited board or clip image is displayed with a frame.

(p.77)

Level Setting Select the level display from [Off], [Level + Shift], and [Level].

Memo ---------------------------------------------------------------------------------------------------------

• The current tilt can be saved as a reference tilt by executing [Calibrate Level] in the D menu.

Changing the Settings

110

Setting the Brightness of the Monitor

You can adjust the brightness of the monitor in the E menu.

LCD Brightness Sets the brightness of the monitor.

Outdoor View Adjusts the brightness of the monitor when the monitor display is difficult to

see during outdoor shooting or in other situations.

Caution -------------------------------------------------------------------------------------------------------

• The [LCD Brightness] setting cannot be changed when [Outdoor View] is set.

Setting the Lamp

You can set whether to turn the power button lamp on when the power is

turned on in [Power Button Lamp] of the E menu.

Setting the Sound Volume

You can set the sound volume in the E menu.

Operation Volume Sets the sound volume when buttons are operated.

Playback Volume Sets the sound volume during playback.

Sound Sets the sound volume for [Startup Sound], [Shutter Sound], [Operation

Sound], and [Self-timer Sound].

Changing the Settings

111

Power Saving Settings

Automatically Turning the Power Off

The camera turns off automatically if no operations are made for a certain

period of time. Set the time until the the camera is turned off in [Auto Power

Off ] of the E menu.

Memo ---------------------------------------------------------------------------------------------------------

• [Auto Power Off] is not available in the following cases.

• During shooting in the B mode or in [Interval Shooting] of the T mode

• During movie playback or slideshow

• During data processing

• While the camera is connected to a computer

• During FlashAir connection

Dimming the Display

The camera dims or turns off the display automatically if no operations are

performed during the set time. The following settings can be set in the E

menu.

Power Saving Dims the display automatically if no operations are performed during the set

time to suppress battery drain. Select the time until the display is dimmed

from [5sec.], [15sec.], [30sec.], [1min.], and [2min.].

Monitor Auto off Delay Turns the monitor off automatically if no operations are performed during

the set time.

Select the time until the the monitor is turned off from [1min.], [5min.], and

[30min.].

If the camera is operated, the original brightness and display are restored.

Changing the Settings

112

Memo ---------------------------------------------------------------------------------------------------------

• [Power Saving] is not available in the following cases.

• During shooting in the B mode or in [Interval Shooting] of the T mode

• In the V mode

• In the C mode

• While a menu is displayed

• While the AC adapter is used

• [Monitor Auto off Delay] is not available in the following cases.

• During shooting in [Interval Shooting] of the T mode

• During movie playback or slideshow

• While the camera is connected to a computer

Changing the Settings

113

Setting the GPS

The camera can acquire information from GPS satellites using the built-in

GPS function.

Caution -------------------------------------------------------------------------------------------------------

• If the GPS function is turned on, the camera acquires the GPS information periodically and the battery

continues to drain even while the camera is off.

• Local geographic conditions such as places where radio waves are blocked or reflected may prevent or

delay the acquisition of GPS information.

• The positions of GPS satellites are continuously changing and this may prevent or delay the acquisi-

tion of GPS information.

• The presence of devices transmitting frequencies close to those of GPS satellites or devices generating

a strong magnetic field may interfere with the acquisition of GPS information or deteriorate the GPS

information precision.

• Note that the camera may take a while to acquire the GPS information if it has not been used for

an extended period or has been moved a great distance from where the GPS information was last

acquired.

• The presence of devices generating a strong magnetic field or devices blocking magnetic fields may

interfere with the acquisition of correct direction information.

• The GPS function may not work near a broadcast tower, etc. and in a place where strong static elec-

tricity is generated.

• The use of GPS, the collection of location information, etc. may be regulated depending on the coun-

try and region. When bringing the camera to a foreign country, check with your embassy or travel

agency beforehand if there are restrictions on bringing in the camera with the GPS function, logging

GPS information, etc.

Changing the Settings

114

Displaying the GPS Information

You can record the location information in images using the GPS function.

Set in [GPS] of the D menu or press and hold x (d) to turn the GPS func-

tion on and off. The GPS information is acquired every one second in the

shooting mode.

The acquired GPS information can be

checked in “Detailed information display” in

the shooting mode (p.20).

1 Electronic compass information (azimuth)

2 Electronic compass direction

3 GPS positioning status

4 GPS lock

5 Longitude

6 Latitude

7 Number of GPS satellites used (Number of acquired visible GPS satellites)

8 Positioning quality

[no fix]: Positioning is not possible.

[2d]: The GSA positioning mode in the NMEA-0183 format is “2d”.

[3d]: The GSA positioning mode in the NMEA-0183 format is “3d”.

[Diff]: The GGA quality in the NMEA-0183 format is “DGPS”.

100

128° ESE

E:139°

N:35°

X 3 (4)

Changing the Settings

115

Memo ---------------------------------------------------------------------------------------------------------

• The standard of GPS information displayed on the monitor can be set in [GPS Disp Mode] of the D

menu.

LAT/LON Displays the latitude and longitude.

UTM Displays the Universal Transverse Mercator (UTM) coordinates.

MGRS Displays the Military Grid Reference System (MGRS) coordinates used as mil-

itary information.

• The details of the location information recorded in images can be checked in “Detailed information

display” in the playback mode (p.20).

• Set [GPS Lock] to [On] in the D menu to enable the function to protect the acquired GPS informa-

tion. The GPS information is protected when d is pressed on the shooting screen. The information is

unprotected when d is pressed again.

Automatically Adjusting the Date and Time Settings

The camera date and time settings can be adjusted based on the GPS infor-

mation by setting [GPS Time Adjustment] to [On] in the D menu.

Recording the Camera Route

You can record the camera route using the GPS information.

1 Select [GPS Log] in the D menu, and press d.

The [GPS Log] screen appears.

2 Select [Record log], and press e.

GPS Log

Record log

Save log data

Discard log data

Changing the Settings

116

3 Set [Logging Interval] and [Logging

Duration].

Logging Interval Select from [1sec.] to [60sec.].

Logging Duration Select from [1] hour to [24] hours.

4 Select [Start], and press e.

GPS logging starts.

Select [Stop] to stop the GPS logging.

When the set logging time elapses, the GPS logging stops.

Caution -------------------------------------------------------------------------------------------------------

• [Interval Shooting] and [Interval Movie] of the T mode cannot be performed during the GPS

logging. If you try to start the shooting, a warning message appears.

• The logging interval may fluctuate in the following cases.

• When the camera is being turned on or off

• When the information of a new satellite is being acquired

• The data may be acquired about 1 minute longer than the time set in [Logging Duration].

Saving Logs

You can save the recorded logs to the memory card as a file.

1 Select [Save log data] on the screen in Step 2 on p.115, and

press d.

2 Select [NMEA] or [KML], and press e.

The log file is saved in the “GPSLOG” folder in the memory card with the

file name composed of the serial number 001 to 999 and the month and

day. (Example: 001_0505)

Memo ---------------------------------------------------------------------------------------------------------

• You can check the log file by using a software supporting the file on a computer.

• When deleting the log file, select [Discard log data] on the screen in Step 2. The log file cannot be

deleted with [Format [Card]] in the

E menu.

Logging Interval

Logging Duration

Start

Record log

ExitExit

10sec.

Changing the Settings

117

Caution -------------------------------------------------------------------------------------------------------

• If the memory card is not available for recording, the log file cannot be saved. Also, a log file cannot

be saved in the tamper-proof card.

• When the GPS information has not been acquired, the log file is not saved.

Setting the Direction Information

You can set the direction information displayed on the shooting screen in

the D menu.

Compass Heading Sets the displayed information.

Compass Calibration Executes the adjustment of the compass.

Hold the camera with one hand and move it slowly like drawing the figure 8. When

the adjustment is completed, a beep sounds.

Declination Select from [TRUE] and [MAG].

When the GPS information has not been acquired, the information for [TRUE] is

not displayed.

Imprinting the GPS Information

The acquired GPS information can be imprinted at the bottom right of the

image. Set in [Data Imprint] of the D menu.

GPS Data Imprint Sets the standard of GPS information to imprint.

UTC Data Imprint Imprints the Universal Coordinated Time.

[Date Imprint] of the A menu is disabled.

Heading Data Imprint Imprints the direction information.

Caution -------------------------------------------------------------------------------------------------------

• The imprinted GPS information cannot be deleted.

• The GPS information cannot be imprinted in the following cases.

• During the shooting in [High Speed Movie] of the T mode

• In the B mode

• When [Drive Mode] is set to [Burst Shoot], [M-Cont], or [S-Cont]

Changing the Settings

118

File Management Settings

Specifying the Folder/File Settings

By default, folders and files are automatically named as follows.

Folder Name 100RICOH to 999RICOH

File Name R0000001.JPG to R0999999.JPG

When the file number exceeds R09999, the next folder is created and

the file number becomes R00001. If the file number exceeds R09999

when the folder number is 999, no more files can be stored on the memory

card currently inserted.

The folder and file names can be changed.

New Folder Options

When images are captured with this camera, a folder is automatically creat-

ed and the captured images are stored in it. Each folder name consists of a

sequential number from 100 to 999 and a string of 5 characters.

The character string in the folder name can be changed.

1 Select [New folder options] in the E menu, and press d.

2 Use ab to select a setting.

Standard 100RICOH to 999RICOH

Date Assigns four digits of the month and day of the shooting date after the folder

number.

The month and day appear according to the date format set in [Date Adjustment]

of the E menu.

Example) 101_0125: Images captured on January 25th

Custom Assigns a freely defined string of five characters after the folder number.

(Default: RICOH)

Example) 101RICOH

When [Standard] or [Date] is selected, proceed to Step 6.

3 Select [Custom], and press d.

The text-entry screen appears.

Changing the Settings

119

4 Enter a folder name.

Up to five single-byte alphanumeric characters can be entered.

㹕 E R T Y U I O PQ

S D F G H J K LA

123

X C V B N M

RICOH

Text input cursor

Delete one character.

Finish the text entry.

Change the

character type.

abcd Moves the text selection cursor (yellow frame).

e Enters a character selected with the text selection cursor.

5 After entering the text, move the text selection cursor to 1,

and press e.

6 Select [Execute], and press e.

Memo ---------------------------------------------------------------------------------------------------------

• A folder with a new number is created when the next shooting is performed after the folder name

is changed.

• The images stored in the folder created with the setting [Standard] can be imported to a computer

using the provided software “DL-20”. (p.94)

Caution -------------------------------------------------------------------------------------------------------

• The maximum folder number is 999. If the folder name is changed after the folder number reach-

es 999, you cannot capture new images. Also, you cannot capture new images when the file name

number reaches 9999.

• For the maximum folder number and maximum file number of the tamper-proof card, contact the

card manufacturer.

Changing the Settings

120

File Name

The character string “R001” is used as the file name prefix by default.

You can change this character string.

1 Select [File name] in the E menu, and press d.

2 Select [Custom], and press d.

3 Select a character to enter.

Uppercase alphanumeric characters and “_” can be entered.

㹕 E R T Y U I O PQ

S D F G H J K LA

123

X C V B N M

Text input cursor

Delete one character.

Finish the text entry.

Change the

character type.

abcd Moves the text selection cursor (yellow frame).

e Enters a character selected with the text selection cursor.

4 After entering the text, move the text selection cursor to 1,

and press e.

Caution -------------------------------------------------------------------------------------------------------

• For the images captured while [File name] is set to [Custom], the file name is changed to

“RIMG.JPG” when they are imported to a computer using the provided software “DL-20”.

Changing the Settings

121

File Sequence No.

In [File Sequence No.] of the E menu, you can set whether to continue the

sequential numbering for file names even when memory cards are replaced.

On Continues the sequential numbering for file names even after memory cards are replaced.

Off Resets the numbering for file names after memory cards are replaced.

Reset File Number

If [Reset File Number] of the E menu is executed, a folder with a new num-

ber is created and file number starts from 0001.

Memo ---------------------------------------------------------------------------------------------------------

• When a memory card is not inserted, the file number in the internal memory is reset.

• When the file number reaches the limit, a new folder is created and the file number is reset automat-

ically. The file number limit differs depending on the [File Sequence No.] setting in the Emenu,

as shown below.

File Sequence No. File Number Limit

On 9999999

Off 9999

Changing the Settings

122

Setting the Copyright Information

You can set the copyright information embedded in the Exif data.

1 Select [Embed Info] in the E menu, and press d.

2 Select [On] or [Off], and press e.

3 Select [Copyright Info], and press d.

The text-entry screen appears.

4 Enter the copyright holder.

Up to 32 single-byte alphanumeric characters and symbols can be entered.

㹵 e r t y u i o pq

s d f g h j k la

123

x c v b n m

Text input cursor

Delete one character.

Finish the text entry.

Change the

character type.

abcd Moves the text selection cursor (yellow frame).

e Enters a character selected with the text selection cursor.

5 After entering the text, move the text selection cursor to 1,

and press e.

The E menu reappears.

The first 11 characters of the entered copyright holder are displayed.

Memo ---------------------------------------------------------------------------------------------------------

• You can check the copyright information in “Detailed information display” in the playback mode

(p.20).

Changing the Settings

123

Imprinting the Copyright Information

The copyright information can be imprinted at the bottom of the image. Set

in the E menu.

Caution -------------------------------------------------------------------------------------------------------

• The imprinted copyright information cannot be deleted.

• The copyright information cannot be imprinted in the following cases.

• During the shooting in [High Speed Movie] of the T mode

• In the B mode

• When [Drive Mode] is set to [Burst Shoot], [M-Cont], or [S-Cont]

• When [Copyright Info] is not set in the E menu

• When [Image Composite Sett.] is set to [Board] or [Image Clip] in the F menu and [Copyright

Print] is set to [On(New)]

• When [Copyright Font Size] is set to [Large] or [Middle], a part of the copyright information may

not be imprinted.

Changing the Settings

124

Saving the Local Date and Time of the Specified City

The date and time set in “Initial Settings” (p.39) serve as the date and time

of your present location and are reflected in the shooting date and time for

images.

Setting the destination to a location other than your present location en-

ables you to save images time-stamped with the local date and time.

1 Select [World Time] in the E menu, and press d.

The [World Time] screen appears.

2 Select [Destination] in [Select Time].

Select [Hometown] to reset the date and

time to the ones of your present location.

3 Press d at [Destination], and set the

daylight saving time.

If the daylight saving time is applied to the city to set, turn [DST] on.

4 Press d at the city name row, and

select the destination city.

The destination city can be selected from 75

cities.

5 Press e.

Memo ---------------------------------------------------------------------------------------------------------

• Even if [Reset] of the E menu is executed, the [Hometown] and [Destination] settings are not reset.

10：00

DST OFF

Destination

New York

Hometown

New York

Select Time

World Time

Destination

Hometown

OKOKCancelCancel

00：00

10：00

Toronto

Miami

New York

Halifax

Mexico City

Lima

Chicago

Destination

OKOKCancelCancel

Changing the Settings

125

Camera Memo Settings

Setting the Camera Memo Mode

The setting method of the camera memo can be set in [Camera Memo

Mode] of the F menu.

Mode1 You can select a [Description] option for each [Item name] of the camera memo.

The image cannot be viewed even when it is registered in [Description].

Mode2 You can select a pair of [Description] options with cd. The first and second

[Description] options entered in [Item name], the third and fourth options, and

so on are treated as pairs.

You cannot use a temporary memo and modify the memo options during shooting

or playback.

Mode3 You can select a [Description] option for each [Item name]. [Description] options

that can be selected are different for each [Item name].

For example, you can use this mode to select a country for the first memo item, and

a corresponding prefecture for the second memo item.

Mode4 You can set the camera memo in the format advocated by the Japanese Council

for the Sophistication of Digital Construction Site Photography. [Edit Detection] is

fixed to [On] in the F menu.

Operations when setting the camera memo can be set with the following

setting items.

Memo Skip Sets the memo item to be fast-forwarded when [Camera Memo Mode] is set to

[Mode2] and cd is pressed and held.

Mark Memo Added Displays the [Memo Marking] indication on the camera memo for the captured

images when [Camera Memo Mode] is set to [Mode2].

Remove Memo Marking Deletes the [Memo Marking] indication on the camera memo screen.

Memo Warning Displays a warning when an option of the camera memo is in the [No Setting]

state.

[Memo Warning] is disabled when [Camera Memo Mode] is set to [Mode2] and

when [Memo 1 Auto Delete] is set to [On].

Memo at Startup Displays the [Camera Memo] screen when the camera is turned on or when the

capture mode is switched.

Memo Increment Enables to increase and decrease the number entered at the end of a camera

memo option using ab.

[Memo Increment] is disabled when [Camera Memo Mode] is set to [Mode2].

Changing the Settings

126

Camera Memo Imprint Imprints the selected options of the first three memo items on the image. Up

to 10 characters are imprinted as the memo item name. Up to 42 characters (30

characters when [Recorded Pixels] is set to [VGA] in the A menu) including the

characters set for the memo item name are imprinted as the option.

[Camera Memo Imprint] is disabled when [Barcode Mode] is set to [Mode3].

Memo 1 Auto Delete Resets the first memo item to [No Setting] every time after shooting to prevent

from forgetting to set the memo item during shooting.

[Memo 1 Auto Delete] is disabled when [Camera Memo Mode] is set to [Mode2].

Memo Overwrite Overwrites the options in the camera memo file with the options entered on the

playback screen.

10 Keyboard Displays the numeric keypad screen when d is pressed on the camera memo to

enter measured values, etc.

Using a Barcode

When setting the temporary memo with barcodes captured with the cam-

era, the registration method of read barcode data can be set in [Barcode

Mode] of the F menu.

Mode1 You can register the barcode data in the first memo item. Each time the barcode is

read, the data is overwritten.

Mode2 You can register the barcode data in the first to fourth memo items.

Mode3 You can register the data of up to 50 barcodes in the first memo item. You cannot

edit the read barcode data. After shooting, the barcode data is deleted.

Mode4 You can register the barcode read the first time in the first memo item and the

barcode read the second time in the second memo item. The barcodes read sub-

sequently are overwritten in the first memo item. The data is retained until the

camera is turned off.

Mode5 You can register the barcode read the first time in the first memo item and the

barcode read the second time in the second memo item. The barcodes read sub-

sequently are overwritten in the second memo item. The data is retained until the

camera is turned off.

Changing the Settings

127

Mode6 You can read and register the QR code converted from the camera memo options

entered as shown below. Use a commercially available application, etc. to create

QR codes.

xxxxxx

//**1

//**2

Item name

(memo item)

Item order

Description

(option)

Line break

(CRLF code)

Space

Mode7 You can enter the barcode data in the selected memo item.

Mode8 You can enter the barcode data of up to 10 memo items automatically and consec-

utively according to the input definition.

Define the item order by separating memo item numbers with commas (,). The

barcode data are entered according to this defined item order. Up to 10 memo

items can be specified.

For example, when the item order is defined as “3, 1, 2”, the data of memo item 3,

memo item 1, and memo item 2 are entered in order.

Barcode details can be set with the following setting items.

Barcode Type Sets the type of barcode to read.

[AUTO]: The type is determined automatically.

[1D Barcode]: EAN-13/8 (JAN-13/8), UPC-A/E, UPC, EAN (with add-on),

Interleaved 2 of 5, CODEBAR (NW-7), CODE39, CODE93, CODE128 TYPE-C, GS1-128

(EAN-128), RSS (GS1 DataBar)

[QR Code], [Micro QR], [DataMatrix], [PDF417], [Micro PDF417], [MaxiCode], [EAN.

UCC], [Aztec]: 2D barcode

Up to 32 digits can be read for 1D barcodes. Up to 2400 digits can be read for 2D

barcodes. Voice memo cannot be used with 2D barcodes.

Scan Time Sets the time to read the barcode.

Barcode LED Turns on the ring light when reading the barcode.

Changing the Settings

128

Using an IC Card (G900SE Only)

You can enter information such as photographer name in the camera memo

using NFC-compatible IC cards.

Set [NFC] to [On] in the G menu, and make settings in [NFC Setting].

Security Sets the IC card ID as the password. (p.129)

DB Co-op Uses the user list including the IC card IDs and the user’s names and affiliations.

Create the user list with the provided software “ST-20” on a computer and transfer

it to the camera in advance.

When entering information using an IC card, touch the IC card on the NFC

mark on the top of the camera.

Caution -------------------------------------------------------------------------------------------------------

• After setting [NFC] to [On] and registering an IC card, you cannot change the [NFC] setting to [Off].

The [Security] setting in [NFC Setting] cannot also be changed to [Off].

Changing the Settings

129

Security Settings

Setting a Password on the Camera

You can set passwords for the administrator and user of the camera, respec-

tively, to restrict available functions.

1 Select [Set/Edit User PW] or [Set/Edit Admin. PW] in the F

menu.

When changing the password, enter the old password.

2 Select the password input method.

Keyboard Uses the keyboard displayed on the camera to enter up to 16 characters.

Refer to p.118 for how to enter characters.

Barcode Enters the password by reading the barcode with the camera.

1D barcode and 2D barcode can be read.

NFC

(G900SE only)

Enters the password by touching an NFC-compatible IC card.

Make [NFC] and [NFC Setting] settings in G menu in advance. (p.128)

3 Enter the password.

4 Re-enter the password entered in Step 3.

If the two passwords match, the password is set on the camera.

Caution -------------------------------------------------------------------------------------------------------

• Be careful not to forget the password you set. If you have forgotten your password, contact your

service center.

Memo ---------------------------------------------------------------------------------------------------------

• When [NFC] is selected, up to 10 user passwords can be registered. If you try to delete a password, all

passwords are deleted together at one time.

• When changing the password, enter the old password, and then enter the new password. If you finish

the password setting without entering the new password, the setting is canceled.

Choose how you will enter the

password.

Keyboard

Barcode

OKCancelCancel

Changing the Settings

130

Restricting Available Functions

You can set the range of available functions for users and administrators.

Setting the operation requesting a password prevents users who do not

know the password from using functions.

1 Select [Camera User Lock Op.] or [Camera Admin. Lock] in the F

menu.

2 Enter the password.

Enter the password set in [Set/Edit User PW] or [Set/Edit Admin. PW].

3 Select an operation requesting a

password with ab, and press d.

Multiple operations can be set in combina-

tion.

Off Does not request a password.

Camera Requests a password when turning the camera on.

Int. Memory Requests a password when trying to play back images in the internal mem-

ory or when connecting the camera to a computer with a USB cable.

If a memory card is inserted, a password is requested when the camera is

turned on.

SDWO

(G900SE only)

Requests a password when accessing an inserted tamper-proof card.

Menus Requests a password when f is pressed or when switching the mode

to the ADJ. mode.

USB Requests a password when connecting the camera to a computer with a

USB cable.

WEB

(G900SE only)

Requests a password when setting the camera to the [Image Sync] mode

while it is connected to a communication device via Bluetooth® or wireless

LAN.

4 Press c.

5 Select [Execute], and press e.

3/5

USB

SDWO

Barcode LED

Set/Edit User PW

Camera User Lock Op.

Set/Edit Admin. PW

Camera Admin. Lock

PW Validity Period

Scan Time

Expanded Settings

O

27sec.

Menus

Int. Memory

SelectSelectFinishFinish

Camera

Changing the Settings

131

Caution -------------------------------------------------------------------------------------------------------

• The administrator password is required to cancel the function restriction set with either [Camera User

Lock Op.] or [Camera Admin. Lock]. When the administrator password has not been set, use the user

password to cancel [Camera User Lock Op.].

Setting a Password on the Memory Card

You can set a password on the memory card.

When the memory card with a password set is inserted to the camera, and

the camera is turned on, the password is requested.

1 Insert a memory card to set the password, and select [Set/Edit

SD Card PW] in the F menu.

2 Select [Execute], and press e.

3 Enter the password.

Refer to “Setting a Password on the Camera” (p.129) for how to display the

menu.

4 Re-enter the password entered in Step 3.

If the two passwords match, the password is set on the camera.

Caution -------------------------------------------------------------------------------------------------------

• For the memory cards with which proper operation has been confirmed, refer to the RICOH website.

• The memory card with a password set cannot be read into a computer using a card reader, etc. Con-

nect the camera to a computer with a USB cable to read the card. (p.93)

• The password is not deleted even when [Format [Card]] is executed in the E menu.

• Be careful not to forget the password you set. The password cannot be reset at the service center.

Changing the Settings

132

Setting the Password Validity Period

You can set the period for which restriction of

functions is canceled after a correct password

is entered with [PW Validity Period] and [Card

PW Unlock Time] of the F menu.

When [PW Validity Period] or [Card PW Unlock

Time] is set to [Off], the password is requested

every time.

Memo ---------------------------------------------------------------------------------------------------------

• [PW Validity Period] is the password validity period when [Camera User Lock Op.] or [Camera Admin.

Lock] is set to [Camera] or [Int. Memory].

4/5

Set/Edit SD Card PW

Card PW Unlock Time

Image Clip

Board

Image Composite Sett.

Composite Position

PW Validity Period

Expanded Settings

O

Bottom Right

60min.

15min.

OKOKCancelCancel

30min.

1min.

Appendix

133

Appendix

Attaching Optional Accessories

Wide Conversion Lens

If the wide conversion lens (DW-5) is attached to the camera, you can per-

form shooting with the 0.8x lens magnification (35 mm equivalent focal

length: 22 mm (wide angle)).

When using the wide conversion lens, set [Lens Adapter On] to [WIDE] in

the D menu. Refer to the User’s Manual provided with the wide conversion

lens for details.

Memo ---------------------------------------------------------------------------------------------------------

• A commercially available 37 mm diameter filter can be attached to the lens. This filter is effective to

protect the camera from scratches and condensation.

• When [Lens Adapter On] is set to [WIDE] in the D menu, this setting information is recorded in

the Exif data.

Caution -------------------------------------------------------------------------------------------------------

• When [Lens Adapter On] is set to [WIDE] in the D menu, the functions that can be set are restricted.

Appendix

134

AC Adapter

If you intend to use the camera continuously for a long period, the use of the

AC adapter (K-AC166) is recommended.

1 Make sure that the camera is turned off, and open the battery/

card cover.

2 Remove the battery.

3 Connect the USB cable (Type-C) of the

AC adapter to the USB terminal of the

camera.

4 Connect the AC plug cord

to the AC adapter, and

plug the cord into the

power outlet.

5 Turn the camera on.

Caution -------------------------------------------------------------------------------------------------------

• When opening and closing the battery/card cover, be sure to remove water and dirt such as sand

adhering to the camera, and avoid locations where dirt can enter the camera interior.

• Securely connect the power plug and AC plug cord.

• When the camera is not used, unplug the AC adapter from the power outlet and disconnect it from

the camera.

• If the AC adapter is disconnected from the camera or the power plug is unplugged from the power

outlet during use of the camera, the data may be lost.

• Do not move the camera by holding the AC adapter cable while the AC adapter is used.

• The AC adapter may not be usable depending on the country and region.

Appendix

135

Troubleshooting

Power Supply

Problem Cause Solution Page

The camera does not

turn on.

The battery is not inserted. Charge the battery and correctly

insert it into the camera.

p.37

The battery is exhausted.

The battery is not inserted in the

correct orientation.

The battery is incompatible. Use the battery DB-110 exclusively

developed for this camera.

—

The AC adapter is not correctly

connected.

Connect the AC adapter correctly. p.134

The camera turns off

during use.

The [Auto Power Off] function

has been activated because the

camera was not operated for a

certain period of time.

Turn the camera back on. p.39

The battery is exhausted. Charge the battery. p.37

The camera does not

turn off.

The camera is malfunctioning. Take the battery out and insert

it again.

p.34

The low battery indica-

tor is displayed or the

camera turns off even

when a fully charged

battery is installed.

The battery is incompatible. Use the battery DB-110 exclusively

developed for this camera.

—

The battery cannot be

charged.

The battery has reached the end

of its service life.

Replace the battery with a new one. —

The battery is hot. Let the battery cool down to ambient

temperature.

—

The battery is quickly

exhausted.

Ambient temperature is very

high or very low.

— —

Appendix

136

Shooting

Problem Cause Solution Page

Shooting cannot be

performed by pressing

The battery is exhausted. Charge the battery. p.37

The camera is turned off or not in

the shooting mode.

Turn the camera on or press z

to switch the camera to the shooting

mode.

p.39

The memory card is not

formatted.

Perform [Format [Card]] of the

E menu.

p.40

The memory card is full. Insert a new card, or delete

unwanted files.

p.83

The memory card has reached

end of its service life.

Insert a new memory card. —

The memory card is locked. Unlock the card. —

The memory card contacts

are dirty.

Clean with soft, dry cloth. —

Images cannot be

checked after shooting.

Confirmation time is too short. Change the setting of [Confirm.

Time] in the D menu.

p.42

The monitor is blank. The monitor brightness is dark. Adjust the brightness of the monitor

in the E menu.

p.110

The monitor is off. Press e to turn the monitor on. p.20

An AV device is connected to

the camera.

Remove the cable from the camera. p.82

The camera is unable

to focus in autofocus

mode.

The lens is dirty. Clean with soft, dry cloth. —

The subject is not at center

of frame.

Lock the focus for shooting. —

The subject is not suitable for

autofocus.

Lock the focus or set the focus mode

to [MF] for shooting.

p.51

The subject is too close. Use [Macro] for shooting or move

away from the subject.

p.49

Images are blurred. The camera was moved when

z is pressed.

Hold the camera with your elbows

pressed against your body, or use

a tripod.

—

When shooting in a dark place,

captured images become easily

blurred.

Use a flash, or set [Setting] to a high

ISO sensitivity.

p.54

p.52

The flash does not

discharge.

The flash is not

charged.

A function preventing flash

operation is selected.

Check the settings and mode. —

The battery is exhausted. Charge the battery. p.37

Appendix

137

Problem Cause Solution Page

Images are too bright. Flash output is not appropriate. Move away from the subject

or use a different light source.

—

The monitor brightness is not

appropriate.

Adjust the brightness of the monitor

in the E menu.

p.110

Images are too dark. The monitor brightness is not

appropriate.

Adjust the brightness of the monitor

in the E menu.

p.110

The exposure compensation is

set to a negative value.

Change the exposure compensation

value.

p.46

The colors of images

are unnatural.

The camera is unable to adjust

white balance for shooting con-

ditions using auto white balance.

Include a white object with the sub-

ject or select the settings other than

[Auto WB] for [White Balance].

p.56

The monitor brightness

changes during

autofocus.

Ambient lighting is poor or dif-

fers from that used for autofocus.

This is normal and does not indicate

a malfunction.

—

Electronic level indica-

tors are not displayed.

Electronic level indicators are

hidden.

Check the setting of [Level Setting]

in the D menu.

p.109

The image is not level

although level indicator

showed that the

camera was level.

The camera was moving during

shooting because you were on

a moving object or due to other

causes.

Do not move the camera during

shooting.

—

The subject is not level. Check the subject. —

Playback/Deletion

Problem Cause Solution Page

Shooting information is

not displayed.

Information display is set to “No

information display”.

Press e to switch the information

displayed on the screen.

p.20

Images cannot be

played back.

Images are not

displayed on the

monitor.

The AV device is not correctly

connected with the camera.

Connect the cable correctly. p.82

Images are not

displayed on an AV

device.

The cable is not correctly

connected.

Connect the cable correctly. p.82

The input setting of the AV

device is incorrect.

Check the AV device settings. —

Appendix

138

Problem Cause Solution Page

The images on the

memory card cannot be

played back.

Images are not

displayed on the

monitor.

The inserted memory card is not

formatted with this camera.

Insert a memory card formatted with

[Format [Card]] of the E menu in

this camera.

p.40

The memory card contacts

are dirty.

Clean with soft, dry cloth. —

The card is malfunctioning. There is not problem with the

camera if images in another memory

card can be played back with this

camera. Do not use a memory card

that has a problem.

—

The monitor turned off. The battery is exhausted. Charge the battery. p.37

The [Auto Power Off] function

has been activated because the

camera was not operated for a

certain period of time.

Turn the camera back on. p.39

File(s) cannot be

deleted.

[Protect] is set for the image(s). Cancel the protection with [Protect]

of the C menu.

p.85

The memory card is locked. Unlock the card. —

A tamper-proof card is used. The images saved in the tamper-

proof card cannot be deleted.

p.36

The memory card

cannot be formatted.

The memory card is locked. Unlock the card. —

Appendix

139

Others

Problem Cause Solution Page

The memory card

cannot be inserted.

The card is not in the correct

orientation.

Insert the memory card in the

correct orientation.

p.34

Camera controls have

no effect.

The battery is exhausted. Charge the battery. p.37

The camera is malfunctioning. Turn the camera back on. p.39

Take the battery out and insert

it again.

When the AC adapter is used,

reconnect it.

p.34

Date is not set correctly. Date and time are not set

correctly.

Set date and time correctly in the

E menu.

p.40

The date setting has

been reset.

The battery was removed. If the battery is removed for more

than about five days, the date

setting will be lost.

Set date and time correctly in the

E menu.

p.40

Appendix

140

Error Messages

Error Message Description

Insufficient Memory The memory is full and no more files can be saved. Insert a new memory card

or delete unwanted files. (p.83)

No image There are no files that can be played back.

Unmatched File You are trying to play back a file in a format not supported by this camera. You

may be able to play it back on a computer.

Memory card error The memory card has a problem, and shooting and playback are impossible.

You may be able to play it back on a computer.

Format card. The memory card you have inserted is unformatted or has been previously

used on another device. Use the card after formatting it with this camera.

(p.40)

Card is locked The write-protect switch on the memory card you have inserted is locked.

Card Error A memory card not compatible with this camera is inserted.

Set date. The date and time are not set. Set the date and time. (p.40)

Insufficient memory.

Continue?

Some files cannot be copied with [Image Copy] of the C menu because

the memory card space is insufficient. Use another memory card or delete

unwanted files.

The file selected for deletion is

protected.

You are trying to delete a protected file. Cancel the protection. (p.85)

Format internal memory. Format the internal memory. (p.40)

Appendix

141

Main Specifications

Camera

Lens RICOH lens, 11 elements in 9 groups (5 aspherical lens elements)

Focal Length 5 to 25 mm

35 mm Equivalent

Focal Length

Approx. 28 to 140 mm

Maximum Aperture F3.5 (W) to F5.5 (T)

Zoom Magnifi-

cation

Optical Zoom 5x

Digital Zoom Approx. 8.1x

Intelligent Zoom 10M: Approx. 7x

640: Approx. 40.5x (zoom magnification obtained together with

the optical zoom)

Motion Blur

Reduction

Still Image Pixel Track SR

High-sensitivity shake reduction mode (Digital SR)

Movie Movie shake reduction mode (Movie SR, Movie SR+)

Focus Type 9-point AF, Spot AF, Auto tracking AF

Focus Range

(from lens face)

Standard: 0.5 m (1.64 ft) to

Z (entire zoom range)

Macro: 0.1 to 0.6 m (0.33 to 1.97 ft) (entire zoom range)

1cm Macro: 0.01 to 0.3 m (0.03 to 0.98 ft) (intermediate portion

of the zoom range)

Switchable to Infinity-landscape, Pan Focus, Manual Focus, and

2.5 m.

• 2.5 m is available only in [Firefighting] of the T mode.

Effective Pixels Approx. 20 megapixels

Image Sensor 1/2.3" CMOS

Recorded

Pixels

Still Image Size: L (20M), M (10M), S (5M), XS (3M), 2M, 1M, VGA

• When the aspect ratio is set to 4:3, the sizes in parentheses

are used.

• 2M and 1M are available only in the U mode.

Aspect ratio: 4:3, 3:2, 1:1

• In the U mode, the aspect ratio is fixed to 4:3.

Movie 4K, 1920, 1280

Sensitivity (standard output) Auto, Manual (ISO 125 to 25600)

White Balance Auto, Daylight, Shade, Cloudy, Tungsten, Fluorescent (D: Daylight

color, N: Daylight white, W: Cool white, L: Warm white), Ring

Light, Manual

Monitor Type 3.0" Wide LCD, Approx. 1040 K dots, With AR coating (cover only)

Adjustment Brightness, Outdoor view setting: ±2 steps

Appendix

142

Exposure

Control

Metering System Multi-segment metering, Center-weighted metering, Spot

metering

Exposure Compen-

sation

±2 EV (1/3 EV steps)

Capture Mode Auto Picture, Program, HDR, Movie, High Speed Movie, Digital

Microscope, Interval Shooting, Interval Movie, Surf & Snow, Digital

SR, U, Watermark Options, Firefighting, Skew Correction,

Text Mode, Zoom Macro, Remove Haze, DOF Composite

Face Detection Maximum detectable faces: 30 Smile capture, Self-portrait assist,

Self-portrait assist + Smile capture, Blink detection

Playback Mode

Slideshow, Rotation, Small Face Filter, Ink Rubbing Filter, Digital

Filter (B&W/Sepia, Toy Camera, Retro, Color, Extract Color, Color

Emphasis, High Contrast, Starburst, Soft, Fish-eye, Brightness,

Miniature), HDR Filter, Movie Edit, Red-eye Edit, Resize, Cropping,

Image Copy, Protect, Start-up Screen, Recover File, Auto Image

Rotation, Skew Correction

Shutter Speed

1/4000 to 1/4 seconds (with the mechanical shutter and electronic

shutter used together)

Up to 4 seconds

Built-in Flash

Mode

Auto flash, Flash off, Flash on, Auto flash + Red-eye edit, Flash on

+ Red-eye edit

Flash Effective Range Wide angle: Approx. 0.2 to 5.5 m (0.66 to 18 ft) (when the ISO

sensitivity is set to Auto)

Telephoto: Approx. 0.2 to 3.5 m (0.66 to 11 ft) (when the ISO

sensitivity is set to Auto)

Drive Mode Single-frame shooting, Self-timer, Continuous shooting, Burst

shooting, M-continuous shooting, S-continuous shooting, Remote

control, Auto bracketing

Storage Media Internal memory (approx. 6.5 GB)

SD/SDHC/SDXC memory card

FlashAir card

Power Supply Rechargeable battery DB-110, AC adapter kit K-AC166 (optional),

Battery charger BJ-11

Battery Life

Still image shooting: Approx. 340 images (with the rechargeable

battery)

• Tested in compliance with CIPA standard using a fully charged

lithium-ion battery at a temperature of 23°C (73°F). Actual

results may vary depending on the shooting conditions/

circumstances.

Movie playback: Approx. 260 minutes (with the rechargeable

battery)

Interfaces USB 3.0 (Type C), HDMI output terminal (Type D)

Waterproof and Dustproof Rating JIS/IEC waterproof class 8, JIS/IEC dustproof class 6

Appendix

143

Dimensions Approx. 118.2 mm (W) × 65.5 mm (H) × 33.1 mm (D) (4.7 in.

(W) × 2.6 in. (H) × 1.3 in. (D)) (excluding operating controls and

protrusions)

Weight Approx. 252 g (8.9 oz) (including the dedicated battery and SD

memory card)

Approx. 225 g (7.9 oz) (body only)

Included Accessories Rechargeable battery DB-110, Battery charger BJ-11, USB power

adapter, Power plug, USB cable, Neck strap, Macro stand

Language English, French, German, Spanish, Portuguese, Italian, Dutch,

Japanese, Danish, Swedish, Finnish, Polish, Czech, Hungarian, Turk-

ish, Greek, Russian, Thai, Korean, Simplified Chinese, Traditional

Chinese

GPS GPS, GLONASS, QZSS (Michibiki) + SBAS

GPS display mode: LAT/LON, UTM, MGRS

GPS lock, GPS time adjustment, GPS logging, GPS data imprint,

UTC data imprint

Electronic Compass Compass display: Cardinal direction, Degrees, Cardinal direction

+ Degrees

Declination correction, Heading data imprint

*1 Image storage capacity shows approximate number of images stored during CIPA-compliant testing. Actual

results may vary depending on the shooting conditions/circumstances. (Excerpt from CIPA standard: With

the monitor ON, with 50% use of flash, at 23°C (73°F))

*2 According to the result of RICOH in-house testing.

Appendix

144

Wireless LAN Communication (G900SE Only)

Standard IEEE 802.11a/b/g/n/ac (standard wireless LAN protocol)

Frequency

(Center Frequency)

2.4 GHz (channels: Ch 1 to Ch 11), 5 GHz (channels: Ch 36 to Ch 48)

• Fixed to 2.4 GHz in the AP mode

Security WEP (64/128 bit), WPA/WPA2-mixed PSK, WPA/WPA2-mixed

EAP supporting “Enterprise” mode EAP-TLS, PEAP (MS-CHAP v2)

Bluetooth® Communication (G900SE Only)

Standard Bluetooth® v4.2 BLE (Bluetooth Low Energy)

Frequency

(Center Frequency)

2.4 GHz (channels: Ch 0 to Ch 39)

NFC Communication (G900SE Only)

Standard FeliCa, MIFARE®, ISO/IEC 14443 Type A/B

Frequency

(Center Frequency)

13.56 MHz

Appendix

145

USB Power Adapter AC-U1/AC-U2

Power Supply 100 to 240 VAC (50/60 Hz), 0.2 A

Output 5.0 VDC, 1000 mA

Operating Temperature 10 to 40°C (50 to 104°F)

Dimensions 42.5 mm (W) × 22 mm (H) × 66.5 mm (D) (1.7 in. (W) × 0.9 in. (H) ×

2.6 in. (D)) (excluding the power plug)

Weight Approx. 40 g (1.4 oz) (excluding the power plug)

Rechargeable Battery DB-110

Nominal Voltage 3.6 V

Rated Capacity 1350 mAh, 4.9 Wh

Operating Temperature 0 to 40°C (32 to 104°F)

Storage Temperature -10 to 45°C (14 to 113°F)

Dimensions 39.8 mm (W) × 34.2 mm (H) × 8.5 mm (D) (1.6 in. (W) × 1.3 in. (H) ×

0.3 in. (D))

Weight Approx. 26 g (0.9 oz)

Battery Charger BJ-11

Rated Input 5 VDC, 1 A

Rated Output 4.2 VDC, 900 mA

Dimensions Approx. 56 mm (W) × 49 mm (H) × 24 mm (D) (2.2 in. (W) × 1.9 in. (H)

× 0.9 in. (D))

Weight Approx. 35 g (1.2 oz)

Appendix

146

Image Storage Capacity

The following table shows the approximate number of images and record-

ing time (in seconds) of movies that can be saved in the internal memory

and a memory card in various formats.

Recorded

Pixels

Aspect

Ratio

Internal Memory Memory Card (8 GB)

8 9 0 8 9 0

Still

Image

L 4:3 856 1478 2320 936 1616 2537

3:2 963 1659 2599 1053 1815 2843

1:1 1135 1961 3039 1242 2145 3324

M 4:3 1699 2916 4495 1858 3189 4917

3:2 1909 3220 5018 2088 3522 5488

1:1 2247 3785 5832 2458 4140 6378

S 4:3 2877 5394 7441 3146 5900 8138

3:2 3220 5994 8299 3522 6556 9077

1:1 3853 7193 9809 4214 7867 10728

XS 4:3 4404 8299 10789 4816 9077 11801

3:2 4904 8991 11988 5364 9834 13112

1:1 6539 11357 15414 7152 12422 16858

2M 4:3 6961 11988 15414 7613 13112 16858

1M 4:3 8299 14386 17983 9077 15734 19668

VGA 4:3 30828 53949 71933 33717 59005 78673

3:2 35966 53949 71933 39336 59005 78673

1:1 43159 71933 71933 47204 78673 78673

Recorded Pixels Framerate Internal Memory

Memory Card

(8 GB)

Movie 3840 30 fps 00:09:26 00:10:19

1920 30 fps 00:47:36 00:52:04

1280 60 fps 00:47:36 00:52:04

30 fps 01:18:41 01:26:04

120 fps 00:29:52 00:32:41

Appendix

147

Caution -------------------------------------------------------------------------------------------------------

• The figures for movies are the total length that can be recorded. The maximum recording time per

shooting is 25 minutes or the equivalent of 4 GB.

• The number of images that can be captured may differ from the number of storable images displayed

on the monitor.

• The storage capacity varies depending on the shooting conditions and the capacity of the memory.

• The number of images storable in a tamper-proof card is smaller than that in a normal memory card.

• The memory cards with which proper operation has been confirmed are listed below.

Recorded Pixels/Capture Mode

Memory Card Speed Class

4K 30fps UHS Speed Class 3 or faster

FullHD 30fps, HD 60fps

[High Speed Movie] in the T mode

Speed Class 4 or faster

HD 30fps Speed Class 2 or faster

• If a movie is recorded with a memory card with which proper operation has not been confirmed,

the movie recording stops when writing to the card is delayed. (The movie recorded by the time the

recording stops is saved.) If a movie is played back with such a card, the playback sound does not

synchronize with the video.

Operating Environment

It is confirmed that a USB connection can be established between the cam-

era and the following OSs.

Windows® Windows® 10 (FCU, CU) (32-bit, 64-bit), Windows® 8.1 (32-bit, 64-bit), Windows® 8 (32-bit,

64-bit), or Windows® 7 (32-bit, 64-bit)

Mac macOS 10.14 Mojave, macOS 10.13 High Sierra, macOS 10.12 Sierra, OS X 10.11 El Capitan, OS

X 10.10 Yosemite

Caution -------------------------------------------------------------------------------------------------------

• The provided software is compatible with Windows® only.

Appendix

148

Using the Camera Abroad

USB Power Adapter (AC-U1/AC-U2), AC Adapter (K-AC166), and

Battery Charger (BJ-11)

These products are for use with currents of 100 to 240 V and 50 or 60 Hz.

Before traveling, purchase a travel adapter for connection to the type of out-

lets used at your destination.

Do not use these products with electrical transformers, as this could damage

the camera.

Television Playback

Captured images can be played back on the televisions and monitors

equipped with a video input terminal. Use a commercially available HDMI®

cable. Use an HDMI® cable with a length of 3 m or less (recommended prod-

uct: RP-CHEU15-K manufactured by Panasonic). The RICOH HDMI cable HC-1

cannot be used.

Appendix

149

Precautions for Use

Waterproof and Dustproof Function

• The camera complies with JIS/IEC waterproof grade 8 and JIS/IEC dustproof grade

6 (IP68).

• After shooting in the rain or washing with water, water may leak out from the lens

barrel or the tripod screw hole on the bottom of the camera. However, this is not

problematic because the camera is protected with the double-layered structure.

• The interior of the camera does not have the waterproof/dustproof structure. If water

enters inside the camera, immediately remove the battery and consult your nearest

repair center.

Camera

• When opening and closing the battery/card cover, be sure to remove water and

dirt such as sand, mud, and dust adhering to the camera, and ensure that water or

dirt does not enter the camera interior. Do not open the cover of the camera on the

beach, at sea, or in a sandy area. If the cover is opened, seawater or sand may enter

the camera.

• When opening and closing the battery/card cover, do not wear cotton work gloves.

Dirt such as sand and dust adhering to the gloves may enter the camera interior. Also,

be sure to remove water and dirt such as sand and mud adhering to the camera, and

avoid locations where dirt can enter the camera interior.

• When the cover is opened, water droplets may be on the inside of the cover. In this

case, clean them out before use.

• If the mode dial is not operated for a long time, it may become difficult to turn due

to its waterproof structure. Turning the dial several times recovers the smooth dial

operation.

• On the beach or in dusty places such as a construction site, be careful to keep the

camera away from sand and dust.

• Do not leave the camera in places where temperature abnormally rises or in places in

high humidity, such as in a car, on the beach, and in a bathroom.

• Ensure that the camera is turned off before connecting the optional AC adapter.

• Do not pull the battery/card cover forcefully.

• Do not hold the battery/card cover when carrying the camera.

• If any metallic object, water, liquid, or other foreign object gets into the camera, im-

mediately stop using the camera. Turn the camera off, remove the battery and mem-

ory card from the camera, and contact your nearest dealer or service center for repair.

• In cold climates, water droplets on the camera may freeze. Using the camera with

frozen water droplets could result in product malfunction. Do not leave the camera

with water droplets.

• Do not drop the camera or subject it to physical shocks.

Appendix

150

• When carrying the camera, be careful that it does not strike other objects. Particular

care is required to protect the lens and monitor.

• The flash may overheat if fired many times in succession. Do not use the flash succes-

sively more than necessary.

• Do not use the flash in close contact with your body or other objects. Failure to ob-

serve this precaution could result in burns or fire.

• Using the flash unit in close proximity to your subject’s eyes could cause temporary

visual impairment. Particular care should be observed when photographing infants.

• Do not direct the flash at the operator of a motor vehicle. Failure to observe this pre-

caution could cause accidents.

• Battery may become hot with extended use. Wait for the battery to cool before re-

moving it from the camera.

• The monitor may be difficult to read in direct sunlight.

• You may notice that monitor varies in brightness or contains pixels that do not light

or that are always lit. This is common to all LCD monitors and does not indicate a

malfunction.

• Do not apply force to the monitor.

• Abrupt changes in temperature may cause condensation, resulting in visible con-

densation inside the lens or camera malfunction. This can be avoided by placing the

camera in a plastic bag to slow the temperature change, and removing it only after

the air in the bag has reached the same temperature of its surroundings. When con-

densation occurs, remove the battery and memory card from the camera, and wait

until water droplets disappear.

• To prevent damage to the product, do not insert objects into the holes in the micro-

phone and speaker coverings.

• Take a test shot to ensure that the camera is functioning properly before using it on

important occasions such as travel or weddings. We recommend that you keep this

manual and spare batteries at hand.

Conditions that May Cause Condensation -------------------------------------------------------------

• If you move to an area with a sharply different temperature

• If humidity is high

• In a cold room after the heater has come on, or where the camera is exposed to cold air from an air

conditioner or other device

USB Power Adapter AC-U1/AC-U2

• Use the USB cable contained in the package.

• Do not subject the power adapter to severe impact or force.

• Do not use in extreme high or low temperatures or areas subject to vibration.

• Do not use in an area subject to direct sunlight or high temperature.

• Unplug the power plug from the power outlet after charging. Failure to observe this

precaution could result in fire.

Appendix

151

• Do not allow other metallic objects to come in contact with the connectors, or con-

tacts of the rechargeable battery as this can result in a short.

• The operating temperature range is 10 to 40°C (50 to 104°F). Charging takes longer at

temperatures below 10°C (50°F).

Rechargeable Battery DB-110

• This is a lithium-ion battery.

• The battery is not fully charged at the time of purchase, so be sure to charge the

battery before use.

• Do not open or damage the battery as this can result in fire or injury. In addition, do

not heat the battery above 60°C (140°F) or expose the battery to fire.

• Due to the battery characteristics, the battery usage time may be shortened when

used in a cold environment, even if the battery is fully charged. Keep the battery

warm by placing it in a pocket or have a backup battery ready.

• When not in use, be sure to remove the battery from the camera or the battery char-

ger. A small amount of current can leak from the battery even when the power is

off, creating excessive discharge and making the battery unusable. If the battery is

removed for more than five days, the date and time settings will be lost. In this case,

reset the date and time.

• If the battery is not used for a long time, charge the battery for 15 minutes once a

year before storing.

• Store in a dry, cool place with an ambient temperature between 15°C and 25°C (59°F

and 77°F). Avoid storing in extreme high or low temperatures.

• After charging the battery, do not immediately charge it again.

• Charge the battery at an ambient temperature between 10°C and 40°C (50°F and

104°F). Charging the battery at a high temperature can deteriorate the battery.

Charging at a low temperature may prevent full charging.

• If the battery usage time becomes very short even when fully charged, the battery

has reached the end of its service life. Replace with a new battery. Be sure to use a

replacement battery recommended by RICOH.

• The recharge time with the camera using the AC-U1/AC-U2 is approximately 3 hours

(at 25°C (77°F)).

Caution -------------------------------------------------------------------------------------------------------

• Use of other batteries can cause explosion.

• Recycle used batteries in a recycle box at your local electronics store or supermarket.

Appendix

152

Battery Charger BJ-11

• Do not charge batteries other than the rechargeable lithium-ion battery DB-110.

Charging other types of batteries may cause an explosion or heating, or may damage

the product.

• If the battery is correctly inserted but the indicator lamp does not light, the battery

may be faulty. Replace it with a new battery. If the indicator lamp still does not light

with the new battery, the battery charger may be faulty. Contact your nearest service

center.

• When charging is completed, unplug the power adapter from the power outlet.

• The battery may become hot during charging, but this is not a malfunction.

• Do not charge the battery in a poor heat radiating environment, such as in a desk.

• If the battery starts to run down more quickly even after being fully charged, it has

reached the end of its service life. Replace it with a new battery.

• Charge the battery in a location where the temperature is between 10°C and 40°C

(50°F and 104°F). (The charging time depends on temperature and remaining battery

power.)

• If the rechargeable lithium-ion battery DB-110 is not used for six months or longer,

store it separately from the camera. Charge the removed battery for about 30 minutes

using the battery charger.

Be sure to recharge the battery every six to twelve months. Also, store the battery in

a location where the temperature will remain at or below room temperature. Avoid

locations with high temperatures.

• The recharge time with the BJ-11 is approximately 2.5 hours (at 25°C (77°F)).

Appendix

153

Camera Care and Storage

Caring for the Camera

• Image quality can be affected by fingerprints and other foreign matter on the lens.

Avoid touching the lens with your fingers.

• Remove dust or lint on the lens with a commercially available blower, or gently clean

the lens with a soft, dry cloth.

• When the camera becomes dirty or after using it on the beach, ensure that the bat-

tery/card cover is closed, and then rinse off dirt, sand, and salt in a basin of tap water

and wipe off the moisture with a soft, dry cloth.

• When the rubber packing becomes dirty, clean it with soft, dry cloth. Dirt adhering

to the rubber packing or scratches on it may deteriorate the waterproof function,

causing water leakage. When the dirt cannot be cleaned or you find scratches on the

rubber packing, take the camera to your nearest dealer or service center to replace it

with a new packing.

• In the unlikely event of malfunction, consult your nearest repair center.

• The camera contains high-voltage circuits. Do not disassemble it.

• Do not expose the camera to volatile substances such as thinner, benzine, or pesti-

cides. Failure to observe this precaution could result in damage to the camera or its

coatings.

• The monitor is easily scratched, avoid touching it with hard objects.

• Clean the monitor by wiping it with a soft cloth dampened with a small amount of any

monitor cleaner that does not contain organic solvents.

Storage

• Do not store the camera where it will be exposed to:

Extreme heat or humidity, large changes in temperature or humidity

Dust, dirt, sand

Severe vibration

Prolonged contact with chemicals including pesticides, or with vinyl or rubber

products

Strong magnetic fields (for example, in the vicinity of a monitor, transformer, or

magnet)

• Store the camera in a lint-free camera case, etc. to prevent dirt and lint from adher-

ing to the camera. Do not carry the camera in a pocket to prevent dirt and lint from

adhering to the camera.

• Remove the battery if the product is left unused for a long period of time.

Appendix

154

Replacement of Rubber Packings

• Replace the rubber packing with a new one every two years even if it is not dirty and

there is no problem with it, to maintain the waterproof function. When the camera

is frequently used in water, in a sandy area, or in a dusty room, it is recommended to

replace it every year. Contact your service center to replace the rubber packing. (A fee

will be charged for the replacement.)

Before Cleaning

• Be sure to turn the camera off.

• Remove the battery and AC adapter from the camera.

Appendix

155

Warranty Policy

All our cameras purchased through authorized bona fide photographic distribution channels

are guaranteed against defects of material or workmanship for a period of twelve months from

the date of your purchase. Service will be rendered, and defective parts will be replaced without

cost to you within that period, provided the camera does not show evidence of impact, sand

or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to

operating instructions, or modification by an unauthorized repair shop. The manufacturer or its

authorized representatives shall not be liable for any repair or alterations except those made

with its written consent and shall not be liable for damages from delay or loss of use or from

other indirect or consequential damages of any kind, whether caused by defective material or

workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its

representatives under all guarantees or warranties, whether expressed or implied, is strictly lim-

ited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs

by non-authorized service facilities.

Procedure During 12-month Warranty Period

Any camera which proves defective during the 12-month warranty period should be returned

to the dealer from whom you purchased the camera or to the manufacturer. If there are no

representatives of the manufacturer in your country, send the camera to the manufacturer, with

postage prepaid. In this case, it will take a considerable length of time before the camera can

be returned to you owing to the complicated customs procedures required. If the camera is

covered by warranty, repairs will be made and parts replaced free of charge, and the camera

will be returned to you upon completion of servicing. If the camera is not covered by warranty,

regular charges of the manufacturer or of its representatives will apply. Shipping charges are

to be borne by the owner. If your camera was purchased outside of the country where you

wish to have it serviced during the warranty period, regular handling and servicing fees may

be charged by the manufacturer’s representatives in that country. Notwithstanding this, your

camera returned to the manufacturer will be serviced free of charge according to this procedure

and warranty policy. In any case, however, shipping charges and customs clearance fees to be

borne by the sender. To prove the date of your purchase when required, please keep the receipt

or bills covering the purchase of your camera for at least a year. Before sending your camera for

servicing, please make sure that you are sending it to the manufacturer’s authorized represen-

tatives or their approved repair shops, unless you are sending it directly to the manufacturer.

Always obtain a quotation for the service charge, and only after you accept the quoted service

charge, instruct the service station to proceed with the servicing.

• This warranty policy does not affect the customer’s statutory rights.

• The local warranty policies available from our distributors in some countries can

supersede this warranty policy. Therefore, we recommend that you review the

warranty card supplied with your product at the time of purchase, or contact

our distributor in your country for more information and to receive a copy of

the warranty policy.

Appendix

156

Regulatory Compliance Statements

For Customers in USA

STATEMENT OF FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Changes or modifications not expressly approved by the party responsible for compli-

ance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communi-

cations. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This transmitter must not be co-located or operated in conjunction with any other an-

tenna or transmitter.

The available scientific evidence does not show that any health problems are associ-

ated with using low power wireless devices. There is no proof, however, that these low

power wireless devices are absolutely safe. Low power Wireless devices emit low levels

of radio frequency energy (RF) in the microwave range while being used. Whereas high

levels of RF can produce health effects (by heating tissue), exposure of low-level RF that

does not produce heating effects causes no known adverse health effects. Many stud-

ies of low-level RF exposures have not found any biological effects. Some studies have

suggested that some biological effects might occur, but such findings have not been

confirmed by additional research. R02070 has been tested and found to comply with

FCC radiation exposure limits set forth for an uncontrolled environment and meets the

FCC radio frequency (RF) Exposure Guidelines.

Appendix

157

CAUTION: RF Exposure

To ensure compliance with the Radio Frequency (RF) exposure guidelines, this device

must be used at least 5 mm away from your body or nearby persons. Failure to observe

this warning could result in the RF exposure levels exceeding the applicable limits.

Declaration of Conformity

According to 47CFR, Parts 2 and 15 for

Class B Personal Computers and Peripherals

We: RICOH IMAGING AMERICAS CORPORATION

Located at: 5 Dedrick Place, West Caldwell,

New Jersey 07006, U.S.A.

Phone: 800-877-0155

FAX: 973-882-2008

Declare under sole responsibility that the product identified herein complies with 47CFR

Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is

identical to the representative unit tested and found to be compliant with the standards.

Records maintained continue to reflect the equipment being produced can be expect-

ed to be within the variation accepted, due to quantity production and testing on the

statistical basis as required by 47CFR §2.909. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) This device must

accept any interference received, including interference that may cause undesired oper-

ation. The above named party is responsible for ensuring that the equipment complies

with the standards of 47CFR §15.101 to §15.109.

Product Name: Digital Camera

Model Number: R02060/R02070

Contact person: Customer Service Manager

Date and Place: May, 2019 West Caldwell

Appendix

158

For Customers in Canada

Innovation, Science and Economic Development Canada (ISED)

Regulatory Compliance Notice

This Class B digital apparatus complies with Canadian ICES-003 (B).

This device complies with Innovation, Science and Economic Development Canada li-

cence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)

this device may not cause interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

The available scientific evidence does not show that any health problems are associ-

ated with using low power wireless devices. There is no proof, however, that these low

power wireless devices are absolutely safe. Low power wireless devices emit low levels

of radio frequency energy (RF) in the microwave range while being used. Whereas high

levels of RF can produce health effects (by heating tissue), exposure of low-level RF that

does not produce heating effects causes no known adverse health effects. Many stud-

ies of low-level RF exposures have not found any biological effects. Some studies have

suggested that some biological effects might occur, but such findings have not been

confirmed by additional research. The R02070 has been tested and found to comply

with ISED radiation exposure limits set forth for an uncontrolled environment and meets

RSS-102 of the ISED radio frequency (RF) Exposure rules.

CAUTION: RF Exposure

To ensure compliance with the Radio Frequency (RF) exposure guidelines, this device

must be used at least 5 mm away from your body or nearby persons. Failure to observe

this warning could result in the RF exposure levels exceeding the applicable limits.

Appendix

159

Pour les utilisateurs au Canada

Avis de conformité à la réglementation d’Innovation, Sciences et

Développement économique Canada (ISDE)

Cet appareil numérique de la classe B est conforme à la norme NMB-003 (B) du Canada.

Le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement

économique Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouil-

lage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Les connaissances scientifiques dont nous disposons n’ont mis en évidence aucun

problème de santé associé à l’usage des appareils sans fil à faible puissance. Nous ne

sommes cependant pas en mesure de prouver que ces appareils sans fil à faible puis-

sance sont entièrement sans danger. Les appareils sans fil à faible puissance émettent

une énergie fréquence radioélectrique (RF) très faible dans le spectre des micro-ondes

lorsqu’ils sont utilisés. Alors qu’une dose élevée de RF peut avoir des effets sur la santé

(en chauffant les tissus), l’exposition à de faibles RF qui ne produisent pas de chaleur

n’a pas de mauvais effets connus sur la santé. De nombreuses études ont été menées

sur les expositions aux RF faibles et n’ont découvert aucun effet biologique. Certaines

études ont suggéré qu’il pouvait y avoir certains effets biologiques, mais ces résultats

n’ont pas été confirmés par des recherches supplémentaires. Le R02070 a été testé et

jugé conforme aux limites d’exposition aux rayonnements ISDE énoncées pour un en-

vironnement non contrôlé et respecte les règles d’exposition aux fréquences radioélec-

triques (RF) CNR-102 de l’ISDE.

ATTENTION : Exposition aux RF

Pour garantir la conformité avec les directives d’exposition aux fréquences radioélec-

triques (RF), cet appareil doit être utilisé à au moins 5 mm de votre corps ou des per-

sonnes se trouvant à proximité. Le non-respect de cet avertissement peut entraîner des

niveaux d’exposition aux RF supérieurs aux limites applicables.

Appendix

160

For Customers in Europe

Information for Users on Collection and Disposal of Old Equip-

ment and Used Batteries

1. In the European Union

These symbols on the products, packaging and/or accompanying docu-

ments mean that used electrical and electronic equipment and batteries

should not be mixed with general household waste.

Used electrical/electronic equipment and batteries must be treated sep-

arately and in accordance with legislation that requires proper treatment,

recovery and recycling of these products.

By disposing of these products correctly you will help ensure that the

waste undergoes the necessary treatment, recovery and recycling and

thus prevent potential negative effects on the environment and human

health which could otherwise arise due to inappropriate waste handling.

If a chemical symbol is added beneath the symbol shown above, in accordance with

the Battery Directive, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium,

Pb = Lead) is present in the battery at a concentration above an applicable threshold

specified in the Battery Directive.

For more information about collection and recycling of used products, please contact

your local authorities, your waste disposal service or the point of sale where you pur-

chased the products.

2. In other countries outside the EU

These symbols are only valid in the European Union. If you wish to discard used prod-

ucts, please contact your local authorities or dealer and ask for the correct method of

disposal.

For Switzerland: Used electrical/electronic equipment can be returned free of charge to

the dealer, even when you don’t purchase a new product. Further collection facilities are

listed on the home page of www.swico.ch or www.sens.ch.

Appendix

161

Notice to Users in EEA Countries

European importer: RICOH IMAGING EUROPE S.A.S.

Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102, 94513 Rungis Cedex,

FRANCE

Manufacturer: RICOH COMPANY, LTD.

1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN

G900SE only:

Operating frequency: 13.56 MHz

Maximum radio-frequency power : 58.8 dBuA/m (at 3 m)

Operating frequency band: 2400 MHz – 2483.5 MHz

Maximum radio-frequency power: 17.59 dBm EIRP

Operating frequency band: 5150 MHz – 5250 MHz (W52)

Maximum radio-frequency power: 17.81 dBm EIRP

Appendix

162

Simplified Declaration of Conformity

This product complies with the essential requirements and provisions of RE Directive

2014/53/EU.

The CE Declaration of Conformity is available by accessing the URL:

http://www.ricoh-imaging.co.jp/english/support/declaration_of_conformity.html

and selecting the product applicable.

G900SE only:

AT EE IE NL ES CH

BE FI IT PL SE HR

BG FR LV PT UK TR

CY DE LT RO IS

CZ EL LU SK LI

DK HU MT SI NO

• Do not use the 5 GHz band (W52) of wireless LAN outdoors in the countries listed

above. The outdoor use of the W52 is prohibited by law in these countries. Use the

2.4 GHz band for outdoors.

• The frequency range used by this product is limited to 5150 to 5250 MHz (W52) in

the 5 GHz band.

The CE Mark is a Directive conformity mark of the European Union.

Ricoh G900 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Ricoh G900

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info