DRAFT 2003/11/12
5
9. Main power indicator/On indica-
tor
When the main power switch is turned
on, the main power indicator lights.
The On indicator lights when the opera-
tion switch is on.
10. Operation switch
Press to turn the power on or off. The On
indicator lights when the power is on.
11. {
{{
{Scanner Stop}
}}
} key
Press if originals are feeding in slanted,
or to cancel scanning while an original is
feeding in.
12. Copy function keys
• {
{{
{Cut Select}
}}
} key
Press to set the length to cut the paper
roll. See p.33 “Setting the Length of
Copy Paper Cut”.
• {
{{
{Sort/Rotate Sort}
}}
} key
Press to put copies into sequentially
ordered sets. See p.35 “Sort/Rotate
Sort”.
• {
{{
{Upper Copy Output}
}}
} key
Press to set the copy output location.
See p.9 “Original and Copy Output
Locations”.
• {
{{
{Fine Direct. Mag.}
}}
} key
Press to adjust the magnification ratio
of additional copies. See p.21 “Fine Di-
rectional Magnification (Additional
Copies Only)”.
• {
{{
{Specified Ratio}
}}
} key
Press to make copies at different mag-
nifications horizontally and vertically
or copy to a selected copy size for each
original size. See p.39 “Directional
Magnification (%)”, p.40 “Directional
Size Magnification (mm)”, and p.41
“User Auto Reduce/Enlarge”.
• {
{{
{Auto Reduce/Enlarge}
}}
} key
Press to make reduced/enlarged cop-
ies based on the paper you select. See
p.39 “Auto Reduce/Enlarge”.
• {
{{
{Zoom}
}}
} key
Press to make reduced/enlarged cop-
ies by the preset magnification ratio in
0.1% (or 1%) increments. See p.37
“Zoom”.
• {
{{
{Stamp}
}}
} key
Press to print the stamps, date stamps,
or page numbers on copies. See p.54
“Background Numbering”, p.55 “Pre-
set Stamp”, p.58 “User Stamp”, p.61
“Date Stamp”, p.64 “Page Number-
ing”, and p.66 “Repeat User Stamp”.
• {
{{
{Edit}
}}
} key
Press to reverse black and white areas
of the original or combine two origi-
nals on one copy. See p.49 “Posi-
tive/Negative”, p.49 “Mirror Image”,
p.50 “Double Copies”, p.50 “Image
Repeat”, p.51 “Image Overlay (Over-
lay 1)”, and p.52 “Format Overlay
(Overlay 2)”.
• {
{{
{Shift/Erase}
}}
} key
Press to create a margin for the lead-
ing and trailing edges of the original
or copy the original while erasing a
specified area. See p.43 “Margin Ad-
justment”, p.44 “Shift”, p.45 “Erase
Border”, p.46 “Erase Inside”, and p.47
“Erase Outside”.
13. {
{{
{Reduce}
}}
}/{
{{
{Enlarge}
}}
}/{
{{
{Full Size}
}}
}
key
Press to change the magnification ratio
for copying. See p.36 “Preset Reduce/En-
large”.
14. Selection keys
Press to select the corresponding item on
the display. See p.7 “Reading the Display
and Using Keys”.
15. Image density keys
Press to adjust copy density. See p.30
“Adjusting Copy Image Density”.
16. {
{{
{Original Type}
}}
} key
Press to select the original type for copy-
ing. See p.31 “Selecting Original Type
Setting”.
17. Number keys
Press to enter a value, such as the number
of copies.
18. {
{{
{#}
}}
} key (Enter key)
Press to confirm values entered.
19. {
{{
{Clear/Stop}
}}
} key
• Clear: press to clear numbers entered.
• Stop: press to cancel copying.
