796999
5
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
“Repeater” quick set-up via WPS
Please note that the mode selection slider (6) must be in the „Repeater“ position, if
youintendtocongureoverWPS.
The repeater clones the WLAN name and password of your wireless LAN router dur-
ingthecongurationprocess.Whendone,asufxisplacedattheendoftheWLAN
name so that you you are able to distinguish between your router’s wireless network
and that of the repeater’s.
StarttheautomaticcongurationviaWPSbypressingtheWPSbutton(2) on the repeater
for about 6 seconds.
Releasethebutton.TherstWLANLEDturnsoffandtheWPSLEDbeginstoashfast.
Press the WPS button on your WLAN router within 2 minutes. Alternatively, you could also
use the WPS function on the router’s web interface.
Please refer to the operating instructions of your router.
TheWPSLEDwillstopashingwhenthecongurationiscomplete;thesignalstrengthof
your wireless network connection is shown by means of the 3 WiFi LEDs.
SelecttheWLANwiththesufxtoconnectadevicetoyourwirelesslocalareanetwork.The
WLAN password is the same as your router’s WLAN password.
Now you could also connect devices to the other two network ports.
Operating modes overview and web interface access
a) “Repeater” mode
OnceyouhavesetuptheproductviaWPS,youshouldmakesomebasiccongurations
on the web interface (like setting the region and changing the login password) (see chapter
Basiccongurationonthewebinterface(allmodes)).Theproductisreadyforuseafterthat.
IncaseyouhavenotsetuptheWPSconguration,gotothechapter“ManualRepeater
conguration”afteryouaredonewiththebasicconguration.
In either case, you should connect a computer or mobile device to the wireless LAN or to
oneoftherepeater‘stwonetworkports.Oncetherepeateriscongured,useyoursame
router password for the WLAN; otherwise your wireless local area network is not encrypted.
Openyourbrowserandthenthecongurationpageoftherepeaterhttp://ap.setup.
TheinternalDHCPserverwillrun,iftherepeaterisnotyetcongured.Insuchacaseyou
canalsoopenthecongurationpageusingthedefaultIPaddress192.168.10.1.
Butifyourrepeaterisalreadyconguredandyouareexperiencingissueswhileopening
thecongurationpage,please,restartyourcomputerandyourrepeater(byswitchingoff
and on again). Alternatively, you could use the IP address to open the web interface. Since
the repeater is already integrated in your network, you can look up the IP address of your
WLAN router. Please refer to the manual of your router.
b) “Access point” mode
As soon as the access point is correctly connected to your router, it is usually ready for use.
Alsointhiscasehowever,youshouldmakethebasiccongurationonthewebinterface
andcongureWLAN(chapter“Accesspoint”conguration).
Connect a computer or a mobile device to the WLAN or the LAN port of the AP.
OpenyourbrowserandthenthecongurationpageoftheAPhttp://ap.setup.
If the web page does not load, use the IP address to open the page. Since the AP is already
integrated in your network, you can look up the IP address of your WLAN router. Please
refer to the manual of your router.
c) “Router” mode
Connect a computer or a mobile device to the WLAN or to the LAN port of the router.
Opentheroutercongurationpage.EntertheURLhttp://ap.setup or the default IP ad-
dress 192.168.10.1 to do this.
Sinceyoucongurethe“Router”modeviathewebinterface,makethebasiccongurations
rstandthenconguretherouter(chapter“Router“conguration”).
d) Log in to the web interface (all modes)
Selectyourdesiredlanguagerstandwaitforthepagetoreload.
Enter the default password adminforthewebinterfaceintotheeldwiththelockandlogin.
Basic conguration on the web interface (all modes)
In the web interface select your region and your time zone.
Then enter a new web interface password.
Conrmwiththebluebutton.
IfyouhavesetuptherepeaterviaWPS,yourbasiccongurationisnowcomplete.
But you can of course change other settings later.
Whenyoureopenthewebinterfaceafteryouhavesetupthebasicconguration,
use the login password you have just created; don’t enter the default login pass-
word.
“Access point” conguration
Ifsetupdoesnotstartautomaticallyafteryouhavecompletedthebasicconguration,click
the second button to the left in the blue bar at the bottom.
You could also change the two names of the WLAN networks (2.4 and 5 GHz).
Now choose the WLAN encryption. We recommend selecting WPA2-PSK, which offers
the highest security. However, if you have devices, which only support WPA, select both
standards.
Enter your WLAN password. Your password should consist of at least 8 characters and
include numbers as well as upper and lower case letters.
Thenclickonthebluebuttontoconrm.Oncethechangeshavebeenapplied,theset-up
is complete.
IfyouhaveconguredthesettingsviaWLAN,youshouldnowconnectyourdevice
to the new WLAN network.
If you would like to make other changes to the settings, click on the Setup button
in the lower right corner of the web interface or on the Wi-Fi button for the WLAN
settings. The current status of the device is shown under Status.
“Router“ conguration
Ifthesetupdoesnotstartautomaticallyafteryouhavecompletedthebasicconguration,
click the second button to the left in the blue bar at the bottom.
Select the Internet access type. If you have for example a DSL connection with your access
data, select PPPoE here.
EnteryourusernameandpasswordforyourDSLconnectionintheappropriateelds.
You could then also change the two names of the WLAN networks (2.4 and 5 GHz).
Now choose the WLAN encryption. We recommend selecting WPA2-PSK, which offers
the highest security. However, if you have devices, which only support WPA, select both
standards.
Enter your WLAN password. Your password should consist of at least 8 characters and
include numbers as well as upper and lower case letters.
Thenclickonthebluebuttontoconrm.Oncethechangeshavebeenapplied,theset-up
is complete.
IfyouhaveconguredthesettingsviaWLAN,youshouldnowconnectyourdevice
to the new WLAN network.
If you would like to make other changes to the settings, click on the Setup button
in the lower right corner of the web interface or on the Wi-Fi button for the WLAN
settings. The current status of the device is shown under Status.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Renkforce WS-WN575A3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Renkforce WS-WN575A3 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1.24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info