569768
35
Verklein
Vergroot
Pagina terug
1/51
Pagina verder
Rendama
x
38 Doc890/3456CV02B
Type T 20 K Pump data
Nominal
ow
rate
Boiler-
resis-
tance
Grundfos
Pump type
Pump
speed
Head
at
Qnom.
Available
head at
Qnom.
Max.*
power
consump-
tion
m
3
/h kPa kPa kPa W
R3401 28.54 46 UPS 65-120F 3 77 31 1.15
R3402 31.63 53 UPS 65-120F 3 69 16 1.15
R3403 37.00 36 UPS 65-120F 3 54 18 1.15
R3404 41.84 43 UPS 80-120F 3 70 27 1.50
R3405 46.75 50 UPS 80-120F 3 62 12 1.50
R3406 51.60 58
LM 80-160/162
- 70 12 1.50
R3501 26.36 37 UPS 65-120F 3 80 43 1.15
R3502 30.83 25 UPS 65-120F 3 72 47 1.15
R3503 34.87 30 UPS 65-120F 3 60 30 1.15
R3504 38.96 35 UPS 80-120F 3 75 40 1.50
R3505 43.00 40 UPS 80-120F 3 68 28 1.50
R3601 26.36 37 UPS 65-120F 3 80 43 1.15
R3602 30.83 25 UPS 65-120F 3 72 47 1.15
R3603 34.87 30 UPS 65-120F 3 60 30 1.15
R3604 38.96 35 UPS 80-120F 3 75 40 1.50
R3605 43.00 40 UPS 80-120F 3 68 28 1.50
Table 12 Water fl ow rate and pump data
* The maximum power consumption of the pump is given for pump speed 3. The optimum operating point in relation to
effi ciency and minimum power consumption can be determined from the related pump curve.
The primary pump has been sized to have an optimum duty when ∆T = 20 K. When running at ∆T’s
less than 20 K the pump size should be checked to ensure suitability.
The water fl ow rate can be adjusted with the aid of the built-in 3-speed pump control. The water
ow rate can be measured by making a ∆P measurement via the fi lling and drainage valve in the
supply and return pipe of the unit. The measured head can be compared with the boiler resistance
(table 12). At full capacity the water fl ow rate can be very accurately compared with the ∆T, meas-
ured acros the fl ow and return of the boiler.
The unit has a standard pump control. When the boiler is en abled, the pump is switched on. When
the enable signal is removed, the pump will continue to run for several minutes. This run on time
is adjustable. The standard time is two minutes.
When the system includes air heaters (ventilation, air treat ment), it is usually desirable to have a
small ∆T over these components. Because of this, the quantity of water fl owing through the total
secondary circuit is usually greater than that fl owing through the boiler units.
y
The low velocity header must be dimensioned such that the water speed does not exceed 0.5 m/s.
In this case the diameter of the header must be calculated for the water volume fl owing through
the secondary circuit. When the water volume fl owing through the secondary circuit is great er
than that fl owing through the primary circuit, a mixed temper ature will exist which is lower than
the desired temperature of the supply from the appliance. The regulation system reacts to this
and opens the control devices (valves, etc.). Usually the supply temperature from the boiler(s)
must be adjusted to obtain the desired temperature in the connected circuits.
35

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rendamax R3400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rendamax R3400 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info