GB
ENGLISH
7
14NoseConeReleaseButtons
15LightCartridge
16NoseCone
17PowerCord
18LintFreeCloth
Familiarise yourself with the features of your new I-Light device.
Flash Window (fig. 1-12)
TheFlashWindowisalteredglasswindowwithbuilt-inUVprotectionthatallowsspecic
wavelengths of light to pass from the hand piece to your skin and hair follicles.
WARNING:
Always inspect the Flash Window before use to ensure there is no damage to the lens.
WARNING: Always clean the Flash Window before use with the lint-free cloth provided to
ensure there is no oil or debris on the lens.
Skin Contact Sensors (fig. 1-13)
TheSkinContactSensorisasafetymechanismthatpreventsthedevicefromaccidentalactivation.In
orderforthedevicetoactivate,theSkinContactSensormustbefullydepressedagainsttheskin.
Flash Button (fig. 1-5)
TheFlashButtonislocatedonthehandpiece.Toactivatetheashbulb,ensuretheSkinContact
Sensor is fully engaged and press the Flash Button.
Bulb Status Indicator Display (fig. 1-8)
ThedeviceisreadytoashwhentheBulbStatusIndicatorDisplayisilluminatedgreen.
NOTE: If the Flash Button is pressed AND the Skin Contact Sensor is not fully engaged OR the
Bulb Status Indicator Display is not illuminated, an audible “beep” will sound.
When the Bulb Status Indicator Display illuminatesyellow,thereare150ashesremainingintheash
bulb. When the Bulb Status Indicator Display flashes yellow, the bulb cartridge has been used up and
will no longer operate. You must replace the bulb cartridge to continue using the device.
Nose Cone Release Buttons (fig. 1-14)
Press both buttons and gently pull to remove the nose cone.
