719577
6
Verklein
Vergroot
Pagina terug
1/120
Pagina verder
6
CARE FOR YOUR HAIRCLIPPER
To ensure long lasting performance of your clipper, clean the blades and unit regularly.
Always keep the clipper in the provided travel pouch.
Ensure the appliance is switched o and unplugged from the mains before cleaning.
Do not use harsh or corrosive cleaners on the unit or blades.
Cleaning should be done with a soft brush.
After each use - brush the accumulated hair from the blades.
WASHABLE CLEANING
The QuickCut Clipper is fully washable for easy cleaning.
Ensure the appliance is switched o and unplugged from the mains.
WASHOUT PORT INSTRUCTIONS
Note: Never rinse, wash or otherwise subject this product to liquid whilst the power cord is connected.
For best results, keep trimmer running while running it under the tap. Allow water to run through the
washout port and over the blades. Recommended to rinse after each use.
Ensure the clipper is dry after cleaning.
For more thorough cleaning the blade set can be easily removed to wash any hair trimmings from the
blades. To release the blade set, push the blade set release button found on the base of the clipper.
Ensure the blades are dry after rinsing under the tap. To reattach, align the blade set onto the clipper
and push the blade set towards the clipper body until it clicks into place.
Place a small drop of cutter or sewing machine oil onto the blades at each end and at the middle point of
the blades. Turn the unit on for a few seconds to distribute the oil then turn o and wipe o excess oil.
BATTERY REMOVAL
The battery must be removed from the appliance before it is scrapped.
The appliance must be disconnected from the supply mains when removing the battery.
Ensure the clipper is discharged of all power.
Starting at the seam on either side of the charge indicator lens, pry open seam working back and forth
from one side to the other, following the seam until the top shell has been pried apart all the way from
the rest of the clipper. Remove the two screws from the inner housing.
Gently pull the inner housing straight up and away to remove the inner housing shell.
Remove the two screws from the inner structure located on each side of the circuit board.
Gently pull the inner structure containing the battery and circuit board up out of the lower housing
structure of the clipper.
From the under side of this inner structure, cut the red and black wires which lead to the battery.
With the inner housing structure right side up, pull upward rmly on the circuit board to allow room
to remove the battery. Pry the battery out of its holder.
Dispose of the batteries safely.
RECYCLING
W
To avoid environmental and health problems due to hazardous substances,
appliances and rechargeable and non-rechargeable batteries marked with one of
these symbols must not be disposed of with unsorted municipal waste. Always
dispose of electrical and electronic products and, where applicable, rechargeable
and non-rechargeable batteries, at an appropriate ocial recycling/collection point.
ENGLISH
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Remington HC4255 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Remington HC4255 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins, Alle talen als bijlage per email.

De handleiding is 1,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info