805754
28
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
3. Insulate the heating pipes to avoid heat loss.
Make sure to use anti-condensation insulation in the case of a heat
pump with the Cool module.
The heat pump is protected against freezing by circulating the water
from the buffer tank when the heat pump is not running. If the heat
pump is switched off during winter or if there is a risk of a power
outage, take precautions to avoid the risk of freezing of the external
pipework and the plate heat exchanger in the device. Drain the device
or use a mix of water and anti-freeze in the pipework.
4. If necessary, install a condensate drainage.
This pipe does not have to be installed in the trench or cable tray with
the other cables and pipes.
See also
Connecting the condensate drain, page 31
5.3 Transport
Caution
Transport and move the appliance in the upright position at all
times to secure the correct working of the refrigerant and the
compressor.
Do not tilt the appliance. A maximum tilt of 15° is allowed, but
only for a short period of time.
Make sure the appliance is protected against shocks. Severe
shocks can damage the shock absorbers of the compressor.
Use the means of transportation suited for the weight of the
appliance.
Do not step under the hovering load.
Always use hoisting cables suited to carry the weight of the
appliance.
When storing the appliance, make sure the ambient
temperatures in the storage room are between -23 °C and 55
°C.
5.3.1 Forklift
Use a forklift to move the pallet with the device to its location.
Important
Make sure to use a forklift with long forks that protrude the edges
of the pallet or the floor-size of the machine. Keep the centre of
gravity in mind when moving the device to prevent unwanted
tipping.
1. Check on which side of the heat pump the lift side indication is placed.
2. Drive the forks under the unit from that side.
3. Secure the heat pump against falling down.
4. Carefully lift and move the device.
5. Carefully place the device at the desired location.
5.3.2 Crane
Use a crane to lift and move the device.
Important
Make sure to use a crane with a crane traverse, and a 4-point
crane cross head.
1. Attach the clamping strap to the frame of the device.
5 Before installation
28 7697291 - v.05 - 11032022
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Remeha E-HP AW 44 Cool Plus B bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Remeha E-HP AW 44 Cool Plus B in de taal/talen: Engels als bijlage per email.

De handleiding is 12.52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info