805754
21
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
4.2 Operating principle
4.2.1 Operating principle for heating
The E-HP AW heat pump extracts energy from the outdoor air and uses it
to heat up a water flow. The heated water flow is then used in a heating
system and for domestic hot water supply.
The energy of the outdoor air is lead to a refrigerant, which heats up and
vaporizes. The compressor increases the pressure and thus the
temperature even more. In the plate heat exchanger (condenser), the
refrigerant condenses, releasing its heat to the hot water circuit and/or
buffer tank. The refrigerant cools down and thus condensates. It is then
fed to the evaporator again through an expansion valve, which reduces
the pressure of the fluid.
The devices with a larger capacity (>48 kW) work in multiple stage
operation. Additional compressors will be deployed in case of increased
heat demand. In normal operation the compressors work alternately. The
leading compressor changes every time the machine starts. The fans will
continuously adjust their speed in accordance with the heating/cooling
demand.
When the outdoor temperature is low or the humidity in the air is high
there might be a build up of ice on the evaporator. If the amount of ice
becomes too much the heat pump will automatically start a defrost
sequence. During this the circulation pump will run at the maximum speed.
At extremely low outside temperatures the unit may occasionally shut
down for short periods to protect itself during operation.
4.2.2 Active cooling
The E-HP AW 'Cool' versions are equipped with a module for active
cooling. This cooling function is based on the reversed functioning of the
heat pump. The heat pump is equipped with a 4-way valve to reverse the
operation. If the heat pump will be used for cooling, the distribution system
inside the building must be suited for this type of operation. The low supply
temperature in cooling mode could cause condensation of the installation
and the pipework must therefore be properly insulated.
In case a low supply temperature during cooling mode is required (<15°C),
an external 4-way valve must be placed in the installation to ensure that
the heat exchanger will remain operating in counterflow.
4.2.3 Hydraulic scheme
The installer is responsible for the design of the hydraulic installation.
We advice to connect the heat pumps to a buffer that has a capacity of
15 L/kW.
As air in the system can lead to serious damages we also advice to
install adequate venting capabilities in the return line to the installation.
Each heat pump needs to be secured with flow protection. This is to
protect the installation in case the flow is restricted and goes under the
required minimum flow.
Below are two examples of a hydraulic scheme with an E-HP AW. For
other examples of hydraulic schemes, contact BAXI
4 Description of the product
7697291 - v.05 - 11032022 21
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Remeha E-HP AW 44 Cool Plus B bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Remeha E-HP AW 44 Cool Plus B in de taal/talen: Engels als bijlage per email.

De handleiding is 12.52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info