657751

Reflecta X4 Plus Handleiding

26
Verklein
Vergroot
Pagina terug
1/37
Pagina verder
-0-
-1-
Table of Contents
1. Precaution................................................................2
2. Preparation...............................................................5
z Standard Accessories ....................................5
z Part Names....................................................6
z Installing the Battery Pack .............................8
z Charging the Battery Pack………………........9
3. Place Film / Slide Into The Holder.......................... 11
4. Using the Digitize Image Copier.............................12
5. Playback Mode.......................................................18
6. Delete Mode...........................................................19
7. To Link the Card to Computer..................................21
8. Viewing Images from TV….……………………….....24
9. Edit the Pictures.......................................................26
10. Appendix………………………………………………..34
z Specifications...............................................34
z Icon & Indicators..........................................35
z System Requirements...................................36
EN
-2-
Welcome
Thank you for purchasing a X4-plusScan.
Please take a moment to read through this manual. Its
contents will send you on an educational journey into your
recorder multiple capabilities.
1. Precaution
Before using X4-plusScan, please ensure that you read
and understand the safety precautions described below.
Always ensure that the X4-plusScan is operated correctly.
• Never operate X4-plusScan inside of an aircraft or
anywhere else where operation of such devices is
restricted. Improper use creates the risk of serious
accident.
• Do not try to open the case of X4-plusScan or
attempt to modify X4-plusScan in any way.
High-voltage internal components create the risk of
electric shock when exposed. Maintenance and
repairs should be performed only by authorized
service providers.
• Keep X4-plusScan away from water and other
liquids. Do not use X4-plusScan with wet hands.
Never use X4-plusScan in the rain or snow.
Moisture creates the danger of fire and electric
shock.
• Keep X4-plusScan and its accessories out of the
reach of children and animals to prevent accidents
or damage to the X4-plusScan.
-3-
If you notice smoke or a strange odor coming from
X4-plusScan, turn the power off immediately. Take
X4-plusScan to the nearest authorized service center
for repair. Never attempt to repair X4-plusScan on your
own.
• Use only the recommended power accessories. Use
of power sources not expressly recommended for
X4-plusScan may lead to overheating, distortion of
the equipment, fire, electrical shock or other
hazards.
• X4-plusScan may become slightly warm during use.
This does not indicate malfunction.
• If the exterior of X4-plusScan needs cleaning, wipe it
with a soft, dry cloth.
EN
-4-
FCC Notice
This equipment has been tested and found to comply with
the limits for a Class B Digitize device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy. If not installed
and used in accordance with the instruction, it may cause
harmful interference to radio communication. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment on the off,
the user is encouraged to try to correct the interference by
one or more the following suggestion.
z Reorient or relocate the receiving antenna.
z Increase the distance between the equipment and
the receiver.
z Connect the equipment to a different power outlet
other than the one where the receiver is connected.
z Consult an experienced television or radio
technician for help.
CAUTION
To comply with the limits for a Class B Digitize device,
pursuant to Part 15 of the FCC Rules, this device must
only be installed on computer equipment certified to
comply with the Class B limits.
-5-
2. Preparation
Standard Accessories
X4-plusScan Quick Guide CD
135 Slide Holder 135 Negative Holder
110 Negative Holder Clean brush
(Optional)
Adaptor USB cable TV cable Lithium Battery
(Optional)
EN
-6-
Part Names
EN
-7-
Note: We suggest using bundled brush to insert into the
X4-plusScan slot and clean the glass surface periodically to
produce a clear image. Please make sure your film negatives /
mounted slides and cover trays are clean before inserting into
the X4-plusScan as well. Dust or dirt from the negatives and
cover trays will affect the quality of your scanned images.
EN
-8-
Installing the Battery Pack
1. Open the Battery Cover by lightly pressing and sliding
it back as shown.
2. Insert the supplied battery. Make sure the battery
polarities match the (+ and -) sign indicated in the
battery compartment.
3. Snap the cover back into place.
Battery power status
-9-
Charging the Battery Pack
The battery pack is not fully charged at the time of
purchase and therefore needs to be charged before use.
If the battery charge becomes low while you are using the
copier, it is recommended to recharge it as soon as
possible.
1. Insert the battery pack into the battery compartment
(see page 8)
2. You may charge the battery in 2 ways:
(a) Plug the USB mini B of the supplied USB cable to
the USB port of the copier, and plug the other USB
end into the USB port of your computer/notebook.
Please charge the battery at least 5.5~6 hours
prior to your first use.
EN
-10-
(b) Plug the USB mini B of the supplied AC adaptor to
the USB port of the copier, and plug the adaptor to
the power outlet.
Please charge the battery at least 2.5~3 hours
3. Red LED will light on during charging. When the
battery pack is fully charged, the red LED light will be
off and you may disconnect the charging connections.
Status LED:
Red: The Image Copier is OFF, the battery is charging.
Purple: The Image Copier is ON, the battery is charged
simultaneously.
Blue: The Image Copier is ON, the battery is not charging
or no battery is loaded.
-11-
3. Place Film/ Slide Into The Holder
1. Keep the glossy surface of the film in the upward
direction.
Open the negative / positive slide holder as Illustrated.
2. Put a 135 positive slide / negative film / 110 negative
film into holder as shown.
3. Close the holder and please make sure the holder
close properly.
EN
-12-
4. Using the X4-plusScan
1. Insert SD card into the SD Card Slot first.
2. Press Power on/off button to power on.
Press Power on/off button to power off if you do not
want to use the Image Copier.
-13-
3. Insert the loaded film / slide holder properly into the
Film / Slide Holder Slot according to the ▲or ● sign
shown on the Image Copier and film holder.
(Insert through front entrance)
(Insert through rear entrance)
EN
-14-
You can adjust the location of the film by moving the
Film Holder; the Film Holder can be moved in both
directions.
Keep your picture in the rectangular white frame,
improper adjustment of picture may copy the black
edges of the Film Holder.
If the black edge of a slide film is on top or bottom of
the LCD display, tilt the copier forward or backward
will eliminate the black edge.
You may crop away the black edges later by the
software. (please refer to page 23 edit the pictures
section 1.4 crop)
-15-
4. To select film type on the screen.
Press Film Type/Up Button for selection.
135 positive (slide)
135 negative
135 black & white
110 negative
Note: Improper selection of Film type may not get good
result.
EN
-16-
5. Press Copy Button to convert picture to Digital image.
To get the best Digitize image wait for the image
display on the LCD screen to adjust the brightness until
it becomes stable. It normally takes 3~4 seconds,
depending on the brightness of your film.
Wait for the “Wait” cursor to disappear, then you may
take your next picture.
Note: For power saving the copier will automatically turns
to sleep condition if you are not using it for more
than 3 minutes. You may wake up the copier by
pressing any one of the buttons.
If the copier is not using for more than 6 minutes it
will turn off automatically.
-17-
6. Moving the Film Holder for next.
7. The exposure of the copier is set automatically, in
some occasion you need to adjust the brightness
(exposure) at your subject.
Press EV/Delete button to adjust expose value.
Press Up or Down Button to adjust the exposure
compensation from +2EV to -2EV in 0.5 increments.
The amount of compensation is shown at the bottom
of the LCD.
EN
-18-
5. Playback Mode
1. Press Playback button once for playback Digital
image. Press twice for slide show reviewing.
2. Press UP button to forward reviewing.
Press DOWN button for backward reviewing.
-19-
6. Delete Mode
1. Under Playback Mode
Press Delete button once to delete current image.
2. Press Delete button twice to delete all images.
EN
-20-
3. Press Delete button three times to format SD card.
Note: Formatting SD card will delete all the files in the
card. Download your files in the SD card into your
computer before the SD card is formatted.
After Formatting the SD card, turn OFF and ON the
Copier again for SD card resetting, otherwise the
Image captured will not be stored into the SD card.
-21-
7. To Link the Card to Computer
1. Plug the USB cable to copier and computer properly.
2. Turn on the power.
3. Press the Up button to select “SD to PC” to YES, then
press the OK button for confirmation.
EN
-22-
4. To active bundled software-MediaImpression, the
images saved in SD card will be imported to your
computer automatically for reviewing.
Please copy the images from SD card to the
designated folder or album of your computer.
-23-
Note:
Bundled MediaImpression is only for images editing
purpose.
The Acquire function is for Film Scanner/ Photo Scanner
without LCD display.
EN
-24-
8.
V
iewing Images from TV
1. Set TV to video mode, and plug the TV cable to copier
and TV set properly. Turn power on.
2. Press Playback Mode button and select proper TV
system, NTSC or PAL for viewing image on TV.
Press Up / Down button for system selection.
Press OK Button for confirmation.
-25-
3. When the image is shown on the TV screen.
Press UP button to forward reviewing.
Press DOWN button to backward reviewing.
4. Press Playback Mode button once more for slide
show on the TV screen.
The slide show can be stopped by pressing the Up or
Down button.
The slide show can be continued by pressing the
Playback Mode button again.
5. Press the Playback Mode button once more during
the slide show will terminate the TV mode and the film
scanner will return to the original stage.
6. Press Power on/off button to turn off when no further
TV viewing.
EN
… 26 …

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Reflecta-X4-Plus

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Reflecta X4 Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Reflecta X4 Plus in de taal/talen: Engels als bijlage per email.

De handleiding is 1,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Reflecta X4 Plus

Reflecta X4 Plus Gebruiksaanwijzing - Deutsch - 38 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info