657745
9
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
ENGLISH
1
User’s Manual
CyberView X5 MF
ENGLISH
2
FEDERAL COMMUNICATIONS COMMISSION
FCC STATEMENT
This Equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent fromwhich
the receiver is connected to.
• Consult the dealer or an experienced radio/TV technician for help.
Warning :
Use only shielded signal cables to connect I/O devices to this equipment.
You are cautioned that changes or modications not expressly approved by
the party responsible for compliance could void your authority to operate the
equipment.
ENGLISH
ENGLISH
3
TABLE OF CONTENS
GettingStarted 4
QuickInstallationGuide(QIG) 6
Installing Software and Driver 6
Installing Hardware 8
Inserting 35mm Slides 8
Inserting 35mm Film strips 9
Additional Features 10
One Button Scan 10
HowtoScanSlides 11
STEP 1 - Aquire Driver 11
STEP 2- Select Film Type 11
STEP 3 - Optional Prescan 11
STEP 4 - Set Scan Settings 11
STEP 5 - Set Scan Preferences 13
STEP 6 - Scan 16
STEP 7 - Exit 16
UserInterface 17
I Main Window Area 17
II Preview Window Area 22
III Active Frame Setting Area 24
IV Thumbnail Panel Area 25
TechnicalSupport 26
ENGLISH
4
Check the package content before getting started.
For Quick Installation please refer to Quick Installation Guide. (Ref. Pg. 11)
Important! Save the original box, receipt and packing material for future
shipping needs.
PackageContents
• Film Scanner.
• Power Adapter [Model: A2-36SG12R-V]
Warning! Using any other power adapter may severely damage the scanner
and will void the product warranty.
• USB 2.0 Cable.
• CyberView Driver CD
• Application software CD for scan editing.
• Printed User’s Manual.
NOTE:
• Application software means the imaging software such as Adobe®
Photoshop® Elements, this is subject to change without notice.
•
GENERAL GUIDANCE:
• Only use the supplied USB-Cable. Connect the computer to the scanner
directly using the USB 2.0 cable.
• Do not use a Hub or extension cable. Only use the USB ports on the rear of
desktop computers.
• If there are any other devices (multifunction device, printers, scanners,
webcam) connected to the computer through USB disconnect them.
• A minimum of 1GB RAM (Windows/Mac) is required.
GETTING STARTED
ENGLISH
5
OperatingAmbientTemperatureRange
50ºto104ºF(10ºto40ºC)
Note: Do not turn on the scanner unless it is within this range. If the scanner
has been stored or transported outside of this range, allow it to return to
within this range before turning it on.
OperatingAmbientHumidityRange15%to76%relative
humidity(non-condensing)
Note: If the scanner is stored or to be transported in cold temperature and then
brought into a warm / humid environment condensation may occur.
This device is designed solely for private use and is not intended for commercial
use. The warranty is reduced from 2 years to 1 year if errors or defects arising from
inappropriate use, improper operation or stress occur. The guarantee period of the
device for private use is 2 years or 20,000 scans.
ENGLISH
6
WINDOWS SYSTEMS INSTALLATION DURING DRIVER INSTALLATION A WARNING
DIALOGUE BOX MAY APPEAR, IF THIS IS THE CASE PLEASE SELECT “INSTALL THIS
DRIVER ANYWAYS”.
Be sure to install the Application Software BEFORE installing the scanner
driver CyberView
You may install the scanner driver directly if you have already installed TWAIN
compliant application software in your computer. Mac users can use iPhoto for
editing.
Notice:
1. In “Found New Hardware Wizard” window, select “Search automatically
or Browse computer for driver software.
2. In “Completing the Found New Hardware Wizard” window, click
“Finish.
NOTE: Not all PC’s will display the found new hardware window, some will install
in the background
INSTALLING SOFTWARE AND DRIVER
Before Installing the Scanner Driver...
If you choose to use the provided application for image editing, install the
application software (ex: Adobe® Photoshop® Elements) by inserting the
application CD into the computer’s CD/DVD drive. Follow the instructions that
will be displayed in a window that opens automatically.
Installing Scanner Driver
a. Insert driver CD into the computer CD/DVD drive and explore the
contents.
b. Double click the ”CyberView icon to begin the installation process. Follow
the onscreen prompts to complete the installation process.
NOTE:
Make sure the scanner is NOT connected to the computer during the
CyberView X 5.0 driver installation.
c. Restart computer once the installation process is complete.
Please Note:
When installing your new scanner onto a Windows system that already has
another USB Flatbed scanner or All-in-one Scan/Copier/Printer device installed, it may be
necessary for you to disconnect the other scanner from the USB port for the Film scanner to
work properly,
QUICK INSTALLATION GUIDE QIG
ENGLISH
7
TWAINscannerplug-inInstallationGuideforAdobePhotoshopElements9
andnewerversions
The TWAIN scanner plug-in is no longer installed with Photoshop Elements 9.
In order to be able to import scanner device through Adobe Photoshop
elements, please follow below instructions after installing Adobe Photoshop
Elements 9 to nd where and how to install the TWAIN component which was
previously installed with the application for versions earlier than Photoshop
Elements 9.
Important: Do not move plug-ins from previous versions of Photoshop Elements
into the Photoshop Elements 9 > Plug-Ins folder, or set the Photoshop Elements
8 (or earlier) > Plug-In folder as the Additional Plug-Ins Folder in Preferences.
Find complete information at ocial Adobe website:
http://kb2.adobe.com/cps/849/cpsid_84933.html
Macintosh
To install the legacy TWAIN plug-in for Macintosh, copy TWAIN.plugin folder
from: //Applications/Adobe Photoshop Elements 9/Optional Plug-Ins/
ImportModules/
Into: //Applications/Adobe Photoshop Elements 9/Locales/<locale>/Plug-Ins/
Windows
To install the legacy TWAIN plug-in for Windows, copy twain_32.8ba from:
C:\Program Files\Adobe\Photoshop Elements 9\Optional Plug-Ins\Import-
Export\
Into: C:\Program Files\Adobe\Photoshop Elements 9\Locales\<locale>\Plug-Ins\
Import-Export\
64-bitWindows
Photoshop Elements 9 is a 32-bit application. When installed on a 64-bit version
of Windows the path is slightly modied.
To install the legacy TWAIN plug-in for Windows, copy twain_32.8ba from:
C:\Program Files (x86)\Adobe\Photoshop Elements 9\Optional Plug-Ins\Import-
Export\
Into: C:\Program Files (x86)\Adobe\Photoshop Elements 9\Locales\<locale>\
Plug-Ins\Import-Export\
ENGLISH
8
Installing Hardware
Connect the slide scanner to a power source.
1. Locate the power switch on the lower right side of the scanner. Make
sure the scanner is TURNED OFF.
2. Plug the AC adapter into an AC power source
FIRST before plugging it into the scanner.
3. Attach the USB cable to the computer using the stadard USB adapter
end. Attach the USB adapter end of the cable to back panel of the
scanner.
InsertingMountedSlides
Attention Before Scanning…
Make sure there is no lmstrip inside scanner before you insert the slide and
there is no slide inside scanner before you insert the lmstrip.
Please note the slide and lmstrip cannot be put into the
scanner at the same time.
Mounted Slides
1. Insert the slide into the slot on the front of the unit, with the dull (emulsion)
side facing up
O On
ENGLISH
9
InsertingMountedSlides(Continued...)
2. Set Scan settings and preferences See Page 13
3. See Scanning options on page 12
Note: Some slide mounts are thin and will require you to apply gentle pressure to the edge
of the mount after insertion for it to register in the scanner, you will know it is detected by
the Preview bar in the user interface, the icons will illuminate in color
No slide detected
slide detected
Inserting Filmstrips
1. Insert the lmstrip with emulsion side up from the left lm entrance.
2. Scanner will auto load and position the rst frame in the center of the
viewing window, if the rst frame is not at the correct position, please
move it by clicking “FORWARD“ or “REVERSE“ button and you can also
move it via the ne tuning function in CyberView interface. See Page 24
3. See Scanning options on page 12
You can load the lm easily by holding around the 3rd frame of the lmstrip
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Reflecta CyberView X5 MF - RPS 7200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Reflecta CyberView X5 MF - RPS 7200 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Reflecta CyberView X5 MF - RPS 7200

Reflecta CyberView X5 MF - RPS 7200 Gebruiksaanwijzing - Deutsch - 26 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info