8
8. Identify the Left Pedal (40) (the threaded shaft on
each Pedal is marked with an “L” for “Left” or an “R”
for “Right”). Using an adjustable wrench, tighten the
Left Pedal counterclockwise into the left Crank Arm
(34).
Tighten the Right Pedal (not shown) clockwise into
the right Crank Arm (34).
34
40
Threaded
Shaft
8
9. Make sure that all parts are properly tightened before you use the exercise cycle.
7. Attach the Seat (12) to the Seat Post (11) with four
M6 x 16mm Hex Screws (29) and four M8 Flat
Washers (18). Note: The Hex Screws and Flat
Washers may be pre-attached to the Seat.
Using an adjustable wrench, remove the Seat Knob
Assembly (31) from the Frame (1).
Insert the Seat Post (11) into the Frame (1). Slide
the Round Collar (13) down the Seat Post and
press it into the Frame. Secure the Round Collar to
the Frame with an M6 x 10mm Screw (26).
Reattach the Seat Knob Assembly (31) to the
Frame (1).
12
11
13
18
29
26
31
1
7
