659409

Redmond RMC-M150E Handleiding

9
Verklein
Vergroot
Pagina terug
1/220
Pagina verder
RMC-M150E
9
GBR
lights up, the default cooking time is displayed, the minute indicator is
blinking).
2.
Use the “Hour/Min” button to select the time value (selected value is
blinking). Press “+” button to increase and “–” to reduce the time value.
Press and hold the corresponding button down to scroll through the
digits.
3.
When the cooking time is adjusted (display keeps blinking) proceed to the
next step. To clear the settings press the “Cancel/Reheat” button and start
adjusting from the beginning.
Note! When adjusting the cooking time remember that each cooking programme
has its own adjustment range and interval. The cooking time of some pro-
grammes starts to count down after the appliance reaches its required operat-
ing temperature.
Time Delay Function
The function allows programming the appliance to start cooking at specic
time. The cooking programme can be delayed from 5 minutes up to 24 hours
in 5 minute intervals.
1. Select and adjust the programme. Press the “Time Delay” button (display
shows blinking minute value).
2.
Use the “Hour/Min” button to switch between the hour and minute adjust
-
ment modes (selected value is blinking). Press “+” button to increase and
“–” to reduce the time value. Press and hold the button down to scroll
through the digits.
3.
Press and hold down the “Start/Keep Warm” button. The Time Delay
function starts operating (the timer stops blinking, the time remaining
before the beginning of selected programme starts to count down).
4.
To cancel the adjustments press the “Cancel/Reheat” button and start from
the beginning.
Caution! Avoid using the Time Delay function for dairy and other perishable
foods (eggs, fresh milk, cheese, etc.).
Keep Warm Function
The function activates automatically at the end of the cooking cycle and keeps
the dish warm at 70-80°С for up to 24 hours. The “Cancel/Reheat” button indi-
cator is lit, the timer counts up the Keep Warm time. Press and hold down the
“Cancel/Reheat” button to disable the function if necessary.
Preliminary Deactivation of Keep Warm Function
To disable the function in the beginning or during the cooking cycle press and
hold down the “’Start/Keep Warm” button, until the “Cancel/Reheat” button
indicator goes off. To enable the function repress and hold down the “Start/Keep
Warm” (The “Cancel/Reheat” button indicator lights up).
Reheat Function
The REDMOND RMC-M150E multicooker allows reheating cold dishes. To reheat:
1. Fill the bowl with cooked food.
2. Close the lid and plug in the unit.
3. Press and hold down the “Cancel/Reheat” button until audible signal is
heard. The “Reheat” indicator on the display and the button indicator light
up. The timer starts to count up the Reheat time. The appliance warms
the food up to 70-80°С, and maintains the temperature for up to 24 hours.
To stop the reheating, press and hold down the “Cancel/Reheat” button
until the corresponding indicators go off.
Non-volatile Memory
The REDMOND RMC-M150E multicooker is a non-volatile memory unit. In case
of a power cut-off the device stores current settings (including the Time Delay
and Voice Guide functions) for a period of time up to 2 hours. If the power
supply resumes during this time period, the multicooker continues its operation
without any memory loss.
“MASTERCHIEF” Function
The REDMOND RMC-M150E multicooker is equipped with a versatile function
“MASTERCHIEF”, which makes the cooking options nearly endless. The function
allows you to make up to 10 time and temperature adjustments during one
cooking cycle (except the “EXPRESS” and “YOGURT” programmes). Within 3
minutes after the cooking cycle is completed the entire sequence of the time
and temperature adjustments can be saved to the appliance memory. Use the
“MASTERCHIEF” function to create your own cooking programmes with unique
temperature modes.
The cooking time of any programme can be adjusted between 1 minute and 15
hours in 1 minute intervals. When the cooking time is set to 00 hours 00 minutes,
the appliance enters either standby or Keep Warm mode, depending on earlier
settings. The cooking temperature can be adjusted between 35 and 180°C in
5°C intervals.
To Adjust Cooking Time and Temperature (create a new programme)
1.
Press the “Menu” button repeatedly to select the cooking programme
(except “EXPRESS” and “YOGURT”). Press and hold down the “Start/Keep
Warm” button. The “Start/Keep Warm” and the “Cancel/Reheat” button
indicators light up. The cooking cycle begins.
2. To disable Keep Warm in advance, press and hold down the “Start/Keep
Warm” button (the “Cancel/Reheat” button indicator goes off). Repress
“Start/Keep Warm” to enable the function if necessary.
3. To adjust the cooking time and the temperature during the cooking cycle
press and hold down the “Time Delay” button until audible signal is heard.
4.
The display shows blinking value of the remaining cooking cycle time.
Use “–” button (to reduce) and “+” button (to increase) the time value. To
switch between minutes and hours press the “Hour/Min” button (see the
“To Adjust Cooking Time” chapter).
5. To enter the temperature adjustment mode press the “Timer/t°С” button.
The display shows the temperature value of the next cooking stage. The
default cooking temperature of “MULTICOOK” is the previously entered
temperature value; the default temperature of other cooking programmes
is 100°C. Use “–” button to reduce and “+” button to increase the tempera-
ture value.
6.
To save the adjustments do not press any button for 10 seconds. The
cooking cycle resumes with adjusted settings. The digits on the display
stop blinking.
7.
To make new time and temperature adjustments repeat steps 3-6. The
programme can be adjusted up to 10 times during one cooking cycle.
To Save the Adjusted Programme
The appliance can save your adjustments, replacing the old programme with
the new one. After the cooking cycle is complete an audible signal is heard. If
during the cooking cycle the programme has been adjusted, the timer starts to
count down from 3 minutes (in 1-second increments). Press and hold down the
“+” and “–” buttons simultaneously before the countdown is completed. If you
do not want the device to save your adjustments, press “Cancel/Reheat”.
After the programme is saved, depending on current settings the appliance
enters either the Keep Warm (the “Cancel/Reheat” button indicator lights up,
the timer counts up the Keep Warm time) or the standby mode.
The Keep Warm function in the adjusted programme will be enabled/disabled
depending on whether it was enabled/disabled in the end of the cooking cycle.
If the temperature in the end of the cooking cycle is below 75°C, the Keep Warm
function will be automatically disabled next time you run the programme.
To Run the Saved Programme
1. Use the “Menu” button to select the programme that was previously ad-
justed and saved. Instead of the default cooking time display shows «– —
– –» sign.
2. Delay the programme if necessary.
3. Press and hold down the “Start/Keep Warm” button. The “Start/Keep
Warm” and the “Cancel/Reheat” button indicators light up. The total cook-
ing time is displayed, the cooking cycle begins, and the timer starts to
count down the cooking time of the programme.
4.
Press and hold down the “Start/Keep Warm” button to disable Keep Warm
cooking programme; to increase the temperature in the temperature
adjustment mode.
6. The “Start/Keep Warm” button is used to activate the selected cooking
programme; to disable Keep Warm in advance. The button is designed to
accommodate the visually impaired users.
7. The “Timer/t°С” button is used to enter cooking time adjustment mode;
to select between time and temperature adjustment modes (in programme
“MULTICOOK”).
8. The “Menu” button is used to select automatic cooking programme.
9. Display.
Display
A3
1. Cooking progress indicator.
2. Cooking time adjustment mode indicator.
3. Selected cooking programme indicator.
4. Reheat/Keep Warm in progress indicator.
5. Power On indicator.
6. Cooking in progress indicator.
7. Voice Guide enabled indicator.
8. Timer value indicator (time/temperature).
9. Timer.
I. PRIOR TO THE FIRST USE
Carefully remove the multicooker and its accessories from the packaging.
Dispose all packaging materials.
Keep all warning labels, including the serial number identication label lo
-
cated on the housing. The absence of the serial number will deprive you of your
warranty benets!
Wipe the housing of the appliance with a soft, damp cloth and let it dry. Clean
the appliance following “General Maintenance Guidelines” to prevent extrane-
ous odours during the rst use.
After transportation or storage at low temperature allow the appliance to stay
at room temperature for at least 2 hours before use
II. OPERATING MULTICOOKER
Before Operating
Place the appliance on a at, stable, and hard surface away from wallpaper,
decorative coatings, or any other objects or cabinets that could be damaged by
steam, humidity, or high temperatures.
Before operating, make sure that the outer and inner parts of the multicooker
have no dents, cracks or any other visible damages. There should not be any
obstructions between the heating element and the bowl.
Fill the removable bowl with food rst and then position it inside the multi-
cooker, to prevent contamination of the cooking chamber.
Never operate the unit without the removable bowl in place. Doing so may
cause overheating and lead to malfunction.
Never operate the unit without food or liquid inside the removable bowl, to
prevent overheating that may cause damage to the non-stick coating.
Do not operate the unit in case of any malfunctions.
Voice Guide
The REDMOND RMC-M150E multicooker is equipped with a Voice Guide function,
which talks you through the entire cooking process, providing with detailed
information about current settings and adjustments. The function automati-
cally activates after the device is plugged in. Press and hold down the “Hour/
Min” button in the standby mode to disable the function if necessary. Repress
and hold the button down to reactivate the function.
To Adjust Cooking Time
1. Select the programme. Press the “Тimer/t°С” button repeatedly to enter
the cooking time adjustment mode (the “Timer” indicator on the display
… 9 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Redmond RMC-M150E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Redmond RMC-M150E in de taal/talen: Alle talen als bijlage per email.

De handleiding is 7,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info