Handleiding Redmond RMC-M110E (pagina 8 van 174) (Alle talen)

659422

Verklein

Vergroot

Pagina terug

1/174

Pagina verder

froth in hot water (spinach, rice, pulses, pasta, dumplings, etc.), do not

ll the bowl more than 3/5 full to avoid clogging the steam valve.

REMEMBER: the appliance can break down if this is not done.

General Procedure for Using Automatic Programmes

1. Prepare (measure out) the required ingredients and place them evenly in

the bowl.

2. Place the bowl inside the appliance, making sure that it is straight and

ts securely onto the heating element.

3. Set the steam-release valve to the required setting:

• HIGH PRESSURE — pressure cooker (for RICE/GRAIN, SOUP, BOIL, JAM/

DESSERT, PILAF, OATMEAL, BEANS, and GAME modes);

• NORMAL PRESSURE — multicooker (for FRY, BAKE, and POPCORN

modes).

4. Plug the appliance in.

5. Select the cooking mode and product by pressing the relevant button (for

the STEW and STEAM modes). The indicator lights up and the default

cooking time starts to ash on the display (the cooking time does not

include the time the appliance takes to reach the required temperature

and pressure).

Press the “COOK TIME” button to select the required cooking speed (“FAST”,

“NORMAL”, “SLOW”).

7. To set the time delay, press the “TIMER / KEEP WARM” button. Use the “+”

and “–” buttons to set the time.

8. A few seconds after the setting is made, the display will stop ashing and

start to work in the set mode. When the required temperature and pressure

is reached, the countdown timer for the mode begins. There is no count-

down timer in POPCORN mode.

9. If not required, switch off the Keep Warm function in advance.

10. If you are cooking under pressure, before opening the lid, carefully open

the steam-release valve to normalise the pressure inside.

11.

To cancel all settings or interrupt the cooking process, press the “REHEAT/

CANCEL” button at any time.

RICE/GRAIN (high pressure)

To cook rice, buckwheat and other cereals, use the automatic RICE/GRAIN mode,

which has 3 settings to suit different recipes, types of products and cooking

times. Default cooking time — 12 minutes.

The ingredients, without liquid, should ll the bowl no higher than the 2/5

level on the scale on the inside of the bowl.

SOUP (high pressure)

To make soups, use the automatic SOUP mode, which has 3 settings to suit

different recipes, types of products and cooking times. Default cooking time

— 30 minutes.

The ingredients, including the liquid, should ll the bowl no higher than the

maximum level on the scale on the inside of the bowl.

BOIL (high pressure)

To boil meat, sh, vegetables, frankfurters, compotes, or to make fruit purées,

use the automatic BOIL mode, which has 3 settings to suit different recipes,

types of products and cooking times. Default cooking time — 20 minutes.

The ingredients, including the liquid, should ll the bowl no higher than the

maximum level on the scale on the inside of the bowl.

FRY (normal pressure)

The REDMOND RMC-110E pressure and multicooker has a special automatic

FRY mode for cooking food (meat, vegetables, poultry, seafood) at normal pres-

sure in a small quantity of oil or fat. The default cooking time in FRY mode is

20minutes. For deep fat-frying use the special basket with detachable handle

(provided).

NOTE: Do not close the lid when cooking in FRY mode. This could trigger the

automatic safety lid-locking system (you will be unable to visually monitor

Wipe the appliance with a damp cloth and rinse the bowl. Leave to dry. Clean

the appliance completely before rst use to avoid bad smells (see Care of the

Appliance).

After transporting or storing at low temperatures, keep the appliance at room

temperature for at least 2 hours before switching it on.

Place the appliance on a hard, even, horizontal surface so that the steam from

the valve will not come into contact with wallpaper, decorative coverings,

electronic devices or other items or materials which could be damaged by high

humidity or temperatures.

Before use, make sure there are no chips or other defects on the outside or

visible inside parts of the multicooker. There should be nothing caught between

the bowl and the heating element.

I I. USING THE MULTICOOKER

Opening/Closing the Lid

The lid seals hermetically, allowing high pressure to build up inside the pressure

and multicooker. When the pressure is higher than atmospheric pressure, the

lid locks automatically. If, when cooking is complete, the lid does not open

easily, this means that the pressure inside is still too high. Open the steam-

release valve and wait for the pressure to fall.

To close the lid, release it and turn the locking lever clockwise as far as it will go.

To open the lid, turn the locking lever counterclockwise as far as it will go and

open the lid with the handle.

NOTE: Before opening the lid, make sure the steam-release valve is open and

no steam is escaping from it.

The appliance heats up when it is working. Do not touch the metal part of the

lid during and just after cooking. Always use the handle to open the lid.

Do not lift the appliance by the lid handle. Use the handles on the side of the

appliance to lift and carry it.

Steam-Release Valve

The REDMOND RMC-M110E pressure and multicooker is equipped with a steam-

release valve on the lid. By switching the valve switch to HIGH PRESSURE — valve

closed or NORMAL PRESSURE — valve open, the appliance can be used in two

different ways: with the valve closed, it works as a pressure cooker; with the

valve open it works as a multicooker.

The clearance in the switch of the steam-release valve is not a defect.

After cooking under pressure, open the steam-release valve to normalise the

pressure inside. When cooking dishes that do not require much liquid (pilaf,

etc.), the steam-release valve can be opened as soon as cooking is over. If liquids

or purées are being cooked, let the appliance cool down for 5-10 minutes before

opening the valve. Otherwise hot liquid may be released together with the

steam.

NOTE: When opening the steam-release valve during or after cooking, there

may be a sudden release of hot steam. Be careful.

Time Delay

When selecting an automatic cooking mode, you can set the Time Delay function

from 1 minute to 24 hours in 1-minute intervals (default time delay — 2 hours).

After selecting the mode and cooking time, press the “TIMER / KEEP WARM”

button. The Time Delay time will appear on the display. The hour indica-

tor will ash.

2. Press the button to set the required hours, and then minutes (press the

“TIMER / KEEP WARM” button again). To change the time quickly, press

and hold down the “+” or “–” button.

3. A few seconds after setting the time delay, the gures on the display will

stop ashing and the countdown timer will begin.

4. To cancel the settings, press the “REHEAT/CANCEL” button.

The Time Delay function is not available in FRY, POPCORN or BAKE, or when

using the reheat function.

Avoid using the Time Delay function when the recipe involves ingredients with

a short shelf-life.

When setting the time delay, remember that the selected mode and the

cooking-time countdown only start when the appliance has reached the required

temperature and pressure.

If the timer is set at 24 hours, the minutes cannot be changed.

Keep Warm

When a cooking mode is complete (as indicated by a signal and the mode in-

dicator light going out), the Keep Warm function begins (the display shows the

keep warm time in 1-minute intervals). This function can keep the temperature

of a dish at 60-80°С for 8 hours.

The Keep Warm function can be interrupted by pressing the “REHEAT/CANCEL”

button: the indicator light will go out and the appliance will switch to standby.

If required, the Keep Warm function can be switched off by pressing the “TIMER

/ KEEP WARM” button (the “REHEAT/CANCEL” indicator light goes out). To switch

the keep-warm function back on, press the “TIMER / KEEP WARM” button again.

Reheat

This will heat cold food to 60-80°С and keep it warm for 8 hours.

1. Place the food in the bowl and place inside the appliance, making sure

that it is straight and ts securely onto the heating element.

2. Close and lock the lid. Set the steam-release valve to HIGH PRESSURE.

Plug the appliance in.

Press the “REHEAT/CANCEL” button. The indicator will light up and the

reheat countdown will appear on the display in 1-minute intervals.

To switch off the reheat function, press the “REHEAT/CANCEL” button

(theindicator light will go out).

Appliance Protection System

The REDMOND RMC-M110E pressure and multicooker is equipped with a mul-

tiple protection system. When cooking under pressure, if the temperature or

pressure inside the cooker exceed the required level, the cooking process will

be delayed until the levels return to normal. If this does not happen within a

certain time, the appliance will stop working.

The appliance is also equipped with additional overheating protection in FRY

and POPCORN modes. If the appliance overheats it will stop cooking and should

cool down completely (approximately 15 minutes) before you can use either of

these modes again. If “HH” appears on the display in FRY or POPCORN mode, it

means the appliance is still too hot and the locking mode is on. This does not

apply to other cooking modes.

Cooking Under Pressure

When the steam-release valve is closed, the appliance is hermetically sealed

and high pressure builds up inside as it heats up. Water is boiled into steam at

over 100°С and cooking time is more than halved. This, in conjunction with a

restricted oxygen supply, means the food retains as many of its nutrients as

possible.

General Rules for Cooking Under Pressure:

• There must be water or some other liquid in the pressure and

multicooker bowl (at least 2 measuring glasses).

• Food cannot be fried in oil under pressure. If required, chopped

vegetables can be lightly fried in a small quantity of oil or stock on the

bottom of the pressure and multicooker in FRY mode with the lid open.

Then add the remaining ingredients, add liquid, close the lid and

continue cooking under pressure.

• The pressure and multicooker bowl should be lled to no more than

4/5 and no less than 1/5 full. When boiling food that swells or forms a

Redmond RMC-M110E Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info