5
For your safety
Care & Use
• Ensure that the product is posioned on a permanent at, stable, heat resistant, non-ammable surface away from
ammable items.
• Ensure that the product has a minimum of 2m overhead clearance and has a minimum of 2m clearance from other
surrounding items.
• Decide on the locaon as above. The assembled product is heavy and it is therefore recommended that the unit is not
moved once posioned and must NOT be moved whilst in use. If it is necessary to move it once it has cooled, please use 2
persons to li (do not drag) the product across the oor.
• The unit may be le outside all year if a Redre Cover (oponal) is used to help protect it from bad weather.
• As this model is made from steel, the surface will age and develop surface rust as soon as it is placed outside and from rst
use. This is to be expected, does not aect use and is not a product fault. Please see below instrucons on how to refresh
the paint nish if desired.
• To help reduce surface rust, rub the product with an oily rag aer each use.
• For safety reasons, always inspect your product prior to use for signs of fague and damage, and replace your model as and
when necessary. Connuing to use a damaged unit could cause personal injury or damage to property.
• Do not cook or prepare food in the repit.
Lighng and refuelling
• This product is ONLY suitable for use with untreated wood or logs.
• Prepare a stack of loosely crumpled newspaper and place on top of the log grate.
• Pile nely split dry rewood or kindling on top of the paper.
• To light the newspaper, use long safety matches or a long nosed lighter.
• Once suciently alight, add logs or larger pieces of untreated wood to the unit to increase the heat slowly.
WARNING SAFETY RULES
PLEASE READ THE FOLLOWING SAFETY RULES PRIOR TO OPERATION OF THIS PRODUCT
NOTICE!
Risk of damage to the product!
DO NOT overload the unit with fuel (untreated wood or logs) or heat logs – if the re is too intense this could damage
the Firebowl. Only one or two logs is sucient.
Recommend fuel(s) amount is 1 kg.
EN
3
