597825
158
Verklein
Vergroot
Pagina terug
1/242
Pagina verder
COPYRIGHT © 2012 RED Digital Cinema 955-0003_v3.2, Rev-A1
156
APPENDIX B: MANAGING DIGITAL MEDIA
MEDIA
REDMAG 1.8” SSD is available with capacities of 64GB, 128GB or 256GB. Record duration is
dependent on resolution, quality and frame rate, but a 64GB SSD will typically provide 24 minutes of
24fps 5K RAW recording.
On MAC computers with REDCINE-X PRO installed, RED Watchdog will mount the SSD as “READ-
ONLY” by default and you cannot write the firmware to the SSD. RED Watchdog is identified by the RED
Coin icon located on the Right side of the Menu Bar. Right-click on the icon to enter RED Watchdog
settings and change to mount the drive as “READ-WRITE” to allow you to save the firmware to the SSD.
Refer to REDCINE-X PRO OPERATION GUIDE for complete RED Watchdog instructions and details.
IMPORTANT: After connecting REDMAG 1.8” SSD to the camera and BEFORE recording, you
should format the media using the camera (even if formatting was previously performed on a
computer). Go to ADANCED MENU > MEDIA > FORMAT to properly format media before
recording.
FORMATTING MEDIA
Media must be formatted prior to using it for recording. Formatting is performed on camera, although
media may be erased on a Macintosh OS X personal computer, allowing the camera to just add the
necessary project profile and clip log data.
NOTE: Media formatted on-camera will use a name and root volume in the format:
Camera Letter + Reel Number + Month + Day + ** where ** is a two digit alphanumeric random number
generated by the camera for each file e.g. A001_0512A6.RDM
Clips recorded to the media follow similar naming conventions
A001_C001_0512A6_001.RDC and A001_C001_0512A6_H.mov etc.
IMPORTANT: Media must always be un-mounted prior to removal or disconnection from the
camera. This ensures power is removed from the digital media and any open data files are closed.
Failure to do so may result in lost data or corrupted files. Refer to REMOVE MEDIA FROM
CAMERA (UNMOUNT).
This procedure outlines the formatting of REDMAG 1.8” SSD media using the RED DSMC camera.
Formatting the SSD media will take about 10 seconds.
1. Insert SSD into camera.
- Insert the REDMAG 1.8” SSD with the RED logo facing outward (away from camera body). SSD
firmly into its slot, but without using excessive force to prevent damage.
2. When SSD media is inserted into the camera, the camera will recognize if the media is unformatted:
- On LCD, EVF and external monitors, in the media section of the GUI, NONE will be displayed
twice (as opposed to when no media is inserted, the GUI displays NONE with three dashes
below “---“).
158

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Red Scarlet X 3.2 - 2012 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Red Scarlet X 3.2 - 2012 in de taal/talen: Engels als bijlage per email.

De handleiding is 10,76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info