2. Camera Assembly
The RED RAIL BASE PLATE, TOP BRACKET, and HANDLES are attached to the camera body
using ! - 20 hex screws. A HEX driver is supplied with the camera. The rails and shoulder
pad/wedge plate adapter slide into the base plate. The RED CRADLE, which holds a RED
DRIVE and the V mount battery plate, attaches to the Universal Rail mount plate using a hex
screw. This is mounted to the camera using 19mm rods.
If using RED-DRIVE, plate it into the RED-CRADLE and secure it with the four thumbscrews. Then
connect the RED e-SATA cable to the RED-DRIVE and to the e-SATA input on the rear of the
camera body. Connect the power cable from the battery plate adapter to the DC input on the
rear of the camera body.
The RED-LCD and RED--EVF viewfinder are mounted to the camera body using a RED ARM. At-
tach the RED ARM to the camera body using the shorter threaded screw. There are attachment
points on the camera body or on the RED RAIL TOP BRACKET. Attach the other threaded end
of the arm to the RED-LCD or RED-EVF.
Then connect the cable from the camera body to the RED-LCD or RED-EVF. Carefully align the
red dots on the socket and plug, and push firmly to establish contact.
Attaching the RED-LCD or RED-EVF
The RED-LCD and RED-EVF cables are interchangeable; but the outputs are not. The RED-EVF
should be connected to the upper output; a RED-LCD should be connected to the lower output.
