7894
33
Verklein
Vergroot
Pagina terug
1/47
Pagina verder
www.rebox.tv
33
4.0 Quick start
Check if all connections between Satellite receiver, Dish, TV and VCR are correct.
Connect the receiver to the mainpower and switch the unit ON with the Power ON /
Standby-button on the frontpanel or on the Remote control.
Switch ON your TV set.
If you have connected your satellite receiver to your TV by using a SCART cable, your TV will automatically switch
to the signals coming from your satellite receiver. If you don't see the picture from the satellite receiver now, please
switch your TV manually to the External video source, you can do this by pressing the AV or EXT button on the
Remote control of your TV.
Note: Refer to your TV manual to find out how your TV switches to the External video Source˛
If you have connected your satellite receiver to your TV by using a UHF cable, you will first need to find the correct
UHF channel on your TV.
Select a free preset on your TV (for example Program number 10).
Open the menu of your TV and select the (automatic) channel search option. (refer to the user
manual of your TV set if you don't know how to use the search function).
Start the channel search option on your TV and search UHF channels until you see the picture
from the satellite receiver.
Store the position in the TV memory (refer to the user manual of your TV set if you don't know how
to store channels in your TV).
If you have correctly followed above steps you will now see the System Set UP menu generated by your satellite
receiver. You are now ready to Set Up your receiver:
The cursor of the menu highlights the “Language Settings”.
Use the UP/DOWN keys on your Remote control, select the language in which you want your
menu to be displayed and press OK. The screen of the menu will now change to the language of
your choice, and the menu option “Channel Set-Up” will appear on your screen.
You will see the “Channel Set-Up” screen with different parameters. The pre-set values are
correct for the ASTRA satellite. We strongly advise you to NOT change any of the settings before
you are sure that your dish is aligned correctly.
You will see two signal bar fields at the right lower part of your screen, showing Signal strength
and signal quality.
Leave the satellite receiver in this menu and start with the alignment of your dish. The ASTRA
satellite is located at 19.2° East. Find with a compass what is North and South, keep the Compass
in your hand and turn your position until South is in front of your face. Now turn 19 Degrees to he
left, this is roughly the-position where the Astra satellite must be found.
Now slowly move your dish to the left or to the right , make small steps to allow the (green) signal
bars to display the signal level. Note that you will not see any green bars until you have aimed
your dish to the ASTRA satellite correctly. If you can not find the signal by turning Left or Right,
then increase or decrease the vertical angle of you dish and again turn Left and Right. Repeat
these steps until you see the Green signal bars appearing.
Once you see the bars, try to optimize the Level and Quality bars my making very small
movements with the dish in Left, Right, Upper or Lower direction. Once you are convinced that
you have the optimal signal strength, firmly fix you dish on that position.
Now you are ready to search the satellite and scan the available channels, you have different
options to scan, we recommend you to the keep the settings in the menu as they are. Just press
the RED (Automatic) button on your remote control to start the automatic scan. All channels will
be found automatically, and once the search is completed the found channels will be stored in a
logical order.
Once this process is finished the receiver will automatically switch to channel number 1. If channel
number 1 is a Free To Air channel ( not encrypted) you will be able to enjoy the first digital
pictures.
33

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Rebox-RE-2250MG

Zoeken resetten

  • 1. Druk op de MENU-toets van de afstandsbediening.

    2. Selecteer de optie “Installatie” en druk op de OK-toets van de afstandsbediening.

    3. Selecteer de optie “Installeer zenders” en druk op de OK-toets.

    4. Selecteer de optie “Astra” als satelliet.

    5. Selecteer de optie “Canal” als netwerk.

    6. Druk op de rode toets van de afstandsbediening om het inladen te starten.

    7. Druk tot slot drie keer op de BACK-toets om het menu te verlaten.
    Gesteld op 27-9-2008 om 15:14

    Reageer op deze vraag Misbruik melden
    • ik heb precies gedaan zoals in deze handleiding staat beschreven.
      stap zes reageert niet. heb astra als satelliet gekozen en canal als netwerk
      de rest van de gegevens zoals frequentie,polarisatie en symbol rate heb ik niet
      veranderd, tevens wil de tuner niet updaten, mijn software versie is 7.16.13
      Geantwoord op 25-4-2011 om 21:51

      Waardeer dit antwoord Misbruik melden
  • Dit probeer ik ook steeds, maar als hij nog niet helemaal klaar is met inlezen, gaat hij plotseling uit en start opnieuw op!!?? Met als gevolg dat er niets gebeurd is. Geantwoord op 17-8-2013 om 16:26

    Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rebox RE-2250MG bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rebox RE-2250MG in de taal/talen: Nederlands als bijlage per email.

De handleiding is 0,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info