Seatrial and Calibration
31
www.raymarine.com
4.3 Wind Calibration
Both Wind Speed and Direction can be calibrated to ensure that
readings from the Wind Transmitter are displayed accurately.
Wind Angle Offset
Motor the vessel directly into the wind.
Press and hold the button for 2 seconds to enter Setup
Press the button repeatedly to scroll to the SETUP WIND chapter
Press the button repeatedly to advance to the Wind Angle page
Press the button to enter Edit Mode
Press the and buttons to change the displayed
value to 000.
The bottom line of the display will indicate the number of
degrees of offset entered.
Press the button to exit Edit Mode
Press and hold the button to exit Setup and return to normal
operation.
Wind Speed Correction
Wind Speed reading is factory calibrated to display correctly and
should not be altered unless external factors are thought to be
causing incorrect readings. Correction should only be carried out if
a known correct Wind Speed is available.
Press and hold the button for 2 seconds to enter Setup
Press the button repeatedly to scroll to the SETUP WIND chapter
Press the button repeatedly to advance to the Wind Speed page
Press the button to enter Edit Mode
Press the and buttons to change the displayed
value to the required percentage.
The bottom line of the display will indicate the percentage
correction factor entered.
Press the button to exit Edit Mode
Press and hold the button to exit Setup and return to normal
operation.