470000
20
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
Run the digital cable from the HD Digital Radome Antenna to the
signal and power connection points:
Run the signal connector to the appropriate MFD.
Run the power cable to a suitable 12 V or 24 V connection point
on the boat’s power system. We recommend connection is made
at the boats power distribution panel, wherever possible.
Caution: Pulling cables
Do NOT use cords or ropes, attached to cable
connectors, to pull cables through restricted
apertures (e.g. as in bulkheads), as this could
cause damage to cables.
Routing cables
Cables must be routed correctly, to maximize performance and
prolong cable life.
Do NOT bend cables excessively. Wherever possible, ensure a
minimum bend radius of 100 mm.
Minimum bend of cable
100 mm (4 in) radius
Minimum bend
200 mm (8 in)
diameter
Protect all cables from physical damage and exposure to heat.
Use trunking or conduit where possible. Do NOT run cables
through bilges or doorways, or close to moving or hot objects.
Secure cables in place using tie-wraps or lacing twine. Coil any
extra cable and tie it out of the way.
Where a cable passes through an exposed bulkhead or deckhead,
use a suitable watertight feed-through.
Do NOT run cables near to engines or uorescent lights.
Always route data cables as far away as possible from:
other equipment and cables,
high current carrying ac and dc power lines,
antennae.
Connecting antenna
Ensuring that the arrow on the digital cable connector is aligned
with the red triangular mark on the HD Digital Radome Antenna
connector, connect the digital cable to the connector on the HD
Digital Radome Antenna, and fully hand-tighten. Do NOT use a
wrench or any other tool.
Note: If the antenna connector is disconnected after initial
installation, we recommend that before reconnecting, you lightly
coat the connector thread with Renolit Aqua 2 Calcium grease.
Connecting signal
Referring to the connection information for the multi-function display
(MFD) to which you are connecting, and to the Typical systems
diagrams given here, connect the digital cable signal connector
to the appropriate MFD.
20
HD Digital Radome Users Guide
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Raymarine HD Digital Radome Antenna bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Raymarine HD Digital Radome Antenna in de taal/talen: Engels als bijlage per email.

De handleiding is 2,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info