6
Inserting and Removing the Battery
Inserting the battery
1
Place battery onto the docking station
2
Slide the battery down the rail gently towards connector
3
The release arm will close automatically as battery slides towards connector
Do not force the battery arm closed, this can bend the battery connector
4
With the release arm almost closed, hold it in place and simultaneously press in the lock cylinder – you
will hear an audible >click< when the battery is properly inserted
Removing the battery
1
Turn off the BionX propulsion system (no illustration)
2
Lightly press on the battery release arm, insert the key and turn clockwise
3
The lock cylinder will protract, freeing battery release arm (no illustration)
4
Remove the battery by opening release arm
5
Lift the battery from dock by sliding upwards
6
Remove the battery
1” (25.4mm)
1
2
3
4
001
001
2
4
5 6
>CLICK<
