570007
18
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
Searching the One Touch Banks
18
2. Press
ENT
again to store the frequency. The channel
and frequency flash twice. If you want to cancel the
operation, press
TUNE/CLEAR
instead of
ENT
. After
storing the frequency, the scanner continues to search
for frequencies.
±
5ECPPKPI"VJG"5VQTGF"%JCPPGNU
To set the scanner to continuously scan through all
channels with stored frequencies, repeatedly press
SCAN
until
I97D
I97DI97D
I97D
and
H
appear. The scanner rapidly scans until it
finds an active frequency.
If the scanner finds an active frequency, it stops and
displays that channel and frequency number, then it
automatically begins scanning again when the conversation
on that frequency ends unless delay is set for the channel
(see “Delay” on Page 20).
±
6WTPKPI"%JCPPGN/5VQTCIG"$CPMU"1HH"CPF"1P
Channel-storage banks (1-10) are on when they have a bar
underneath them and off when no bar appears underneath
them. To turn off a channel-storage bank, press the bank's
number key during scanning. The bar under the bank's
number disappears.
To turn on a channel-storage bank (1-10) during scanning,
press the bank's number key. A bar appears under the
bank's number.
±
If no transmission is found, the scanner continues to scan
through all selected banks.
/QPKVQTKPI"C"5VQTGF"%JCPPGN
You can continuously monitor a specific channel without
scanning. This is useful if you hear an emergency
transmission on a channel and do not want to miss any
details – even though there might be periods of silence – or
if you simply want to monitor that channel.
Follow these steps to manually select a channel.
1. Repeatedly press
SCAN/MAN
until
C7D
C7DC7D
C7D
appears.
2. Enter the channel number (1-200).
3. Press
SCAN/MAN
again.
±
"016'"
±
"
Scanning the Stored
Channels
To reverse the scanning
direction, press
H
or
G
.
To set the scanner to remain on
the current channel for 2
seconds after the transmission
ends, see “Delay” on Page 20.
To set the scanner to remain on
the current channel, even after
the transmission stops, press
SCAN/MAN at any time during
the transmission.
C7D
C7DC7D
C7D appears
and
I97
I97I97
I97disappears (see
“Monitoring a Stored Channel”
on Page 18).
To lock out channels so the
scanner does not stop for a
transmission on those channels,
see “Locking Out Channels or
Frequencies” on Page 21.
Turning Channel-Storage
Banks Off and On
The scanner does not scan any
of the channels within the banks
you have turned off.
You cannot turn off all banks.
There must be at least one
active bank.
You can manually select any
channel in a bank, even if the
bank is turned off.
When you turn on a bank during
scanning, the scanner moves to
the selected bank and scans it.
20-424.fm Page 18 Monday, September 9, 2002 9:44 AM
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw RadioShack PRO-2018 - 200 Channel bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van RadioShack PRO-2018 - 200 Channel in de taal/talen: Engels als bijlage per email.

De handleiding is 1,14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info