587902
10
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
10
REMKO PGT (E) series
s
s
s
Before the unit start, ensure that the gas supply cylinders are correctly
secured and are not positioned directly in the heat radiated by the units.
The pressurised gas tanks must be positioned to the side/rear of the unit.
Commissioning
Connecting the units
to the electrical power supply
1. Move the operating
switch to the "0"
(Off) position.
2. Connect the unit's power
plug to a properly
installed and fused
mains socket.
230 V/50 Hz.
The units should be checked for
visible defects on the operating
and safety devices as well as
proper installation and correct
electrical and gas connections
before commissioning.
Only a person who has been
adequately trained in the handling
of the units and the use of liquid
gas, pursuant to DGUV 79 may
be tasked with the operation and
monitoring of the units.
Tank gas systems
When connecting the units to tank
gas systems, ensure sufficient pipe
dimensions depending on the pipe
length.
A sufficient gas supply
to the consumer system can
be ensured through the use
of an evaporator.
In order to guarantee the faultless
unit function, it is advisable to
install a permanently set pressure
controller with 1.5 bar outlet
pressure and corresponding gas
throughput (see unit name plate),
as well as a shut-off device tailored
and approved for the respective
pre-pressure.
In order to avoid malfunctions
of the unit’s control and safety
equipment due to harmful
substances such as rust and dust
from the gas supply line or tank(s),
it has proven to be essential to
install gas filters before the control
and safety equipment of the units
(see DIN EN 676 and TRF 88
section 5).
NOTE
The electrical connection for the
units must be made at a separate
feed point with a residual current
device in accordance with
VDE 0100, Section 55.
CAUTION
In the event of defects that en-
danger the operational safety
of the units, operation of the
units must be discontinued im-
mediately and the supervisor
informed!
CAUTION
Pressurised gas tanks must
not lie horizontal when used
during unit operation.
Gas outlet in the liquid phase.
CAUTION
The tanks must never
be heated or de-iced through
the unit hot air flow.
There is a risk of explosion!
NOTE
Installation work on the tank
gas systems and the supply
lines may only be performed
by qualified specialist person-
nel.
CAUTION
Before all work on the gas
supply and when replacing gas
cylinders, all shut-off valves
must be closed and no ignition
sources are permitted in the
immediate vicinity.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw REMKO PGT 60E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van REMKO PGT 60E in de taal/talen: Engels als bijlage per email.

De handleiding is 1,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van REMKO PGT 60E

REMKO PGT 60E Gebruiksaanwijzing - Nederlands - 24 pagina's

REMKO PGT 60E Gebruiksaanwijzing - Deutsch - 28 pagina's

REMKO PGT 60E Gebruiksaanwijzing - Français - 28 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info