66886
7
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
REL Acoustics ST 5 User Manual
7
Most functions are accessible via either the remote or the front panel. Standby and the
memory are only accessible via the remote. Display timeout, display brightness and DC
trigger are only accessible via the front panel.
To prevent accidental changing of parameters once they have been set, the manual
encoder on the front panel can be electronically locked. To lock the control first press F2
and then F1 in sequence, the display will read FP 0F (front panel off), to reactivate the front
panel encoder press F2 and F1 in sequence again, the display will read FP on (front panel
on).
Used to raise or lower the volume when
using the LFE input. Range 00 to 99
as displayed on the digital readout on
main control panel.
Used to raise or lower the volume when
using the high level input. Range 00 to 99
as displayed on the digital readout on
main control panel.
Used to set the upper roll off point in the
range 16 to 99 Hz as displayed on the
digital readout on the main control panel.
LFE MUTE MEMORY
Single channel graphic equaliser, - 9dB to
+ 9dB at 80Hz.Display will read –9 ….0….9
Used to store user preset preferences. See
below for detailed instructions on how to
store and recall settings.
Used to mute the LFE input. Display will
read LF on or LF oF. Press again to switch
LFE input back on
Used to put the sub bass system into
standby mode. Display shows Stby, press
again to bring out of standby.
Used to change the phase from 0 to 180
Degrees. NOTE: The display will read
0 and 18.
Memory Functions
There are four memory locations for the user to store preferred settings, these are:
Position 1 Using the MEMORY button in conjunction with the LFE + and – buttons
Position 2 Using the MEMORY button in conjunction with the HIGH LEVEL + and – buttons
Position 3 Using the MEMORY button in conjunction with the FREQUENCY + and – buttons
Position 4 Using the MEMORY button in conjunction with the SLAM/DEPTH + and – buttons
To Store User Settings
First select the settings for each function which satisfy your particular requirements, for
example you may wish to store the settings for two channel use and another set for 5.1 home
cinema use. When the correct settings are chosen then press the MEMORY button, and one
of the four memory location + buttons, the settings are now stored in this memory position.
To recall these settings press the memory button and the relevant memory location – button
in sequence. The above procedure can be repeated for the other memory locations
All settings can be stored in memory, including those accessible only via the front panel.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw REL Acoustics Strata 5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van REL Acoustics Strata 5 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info