685842
2
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
1 2 3 4 5 6 7
Prog A
Prog A
1 2 3 4 5 6 7
I. SET CLOCK
Icon : clock
A- Set the current time of day
Press the
key repeatedly until this display appears :
Now use the ON and OFF keys.
The time of day will appear in hours and minutes. The +/ON key increases
the setting. Holding down the key will cause the numbers to increase more
rapidly.The -/OFF key decreases the setting.
Note : 2 blinking dots separate the hours from the minutes.
B- Set current day
Press the key to move the square through the days of the week numbered 1 to 7 :
Monday = 1, Tuesday = 2,.....
Place the
square on the current day of the week . Example : if "today" is
Wednesday, place the square on "3".
II. SET DAYS OF THE WEEK TO WATER
Icon : calendar
Press the
key until this display appears :
First select the A or B program by pressing the A/B key. “Prog A” or
Prog B” will appear in the upper left corner of the display.
Use the key to move the square through the days of the week (1 =
Monday). Note that the numbers blink.
The controller is factory pre-set to water every day. The +/ON and -/OFF
keys are used to set the water days. Press the OFF key if you do not wish to
water that day.
The square will disappear. If you change your mind, press the ON key and
the square returns.
Example : you want to water every Monday, Tuesday and Thursday. You
must therefore cancel the days you do not wish to water.
Use the key to move the square to day 3. Now press the OFF key. The
square around the number 3 = Wednesday will disappear. Repeat the procedure for Friday, Saturday and Sunday
(numbers 5, 6 and 7). In this example, only numbers 1, 2 and 4 should appear within a square.
III. SET START TIMES
Icon : alarm clock
You may operate the same cycle up to 8 times a day. At each “start time”, all stations on a program will operate in
sequence for the duration you have selected. See chapter IV.
Now you set the start times for each of the programs.
Repeatedly press the
key until this display appears :
Use the A/B key to select program A or B. The program selected is
indicated on the display by “prog” followed by A or B.
Now set the first start time.
Use the +/ON and -/OFF keys to increase or decrease the setting.
After setting the first start time, press to set the next start time. Use the
+/ON and -/OFF keys.
To set the start times for the other program, press the A/B key.
To store the starts and move to the next function use the
key.
Note : it is not necessary to use all the start times !
The SUPER IMAGE controller will automatically file your start times in
chronological order (from 00.00 to 23.59).
To cancel a start time : repeatedly press the key to display the start times. When you see the start time you want to
cancel, hold down the key for at least 2 seconds.
Note : There is only 1 dot between hours and minutes for start times.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw RAINBIRD SUPER IMAGE SERIES bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van RAINBIRD SUPER IMAGE SERIES in de taal/talen: Engels als bijlage per email.

De handleiding is 0,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info