Connection Instructions
When your new Quingo is delivered, the
installed batteries will be partially charged.
Fully charge before use.
1. Place your scooter in an area that is
dry and well ventilated. Make sure a
power outlet is nearby.
2. The scooter should be switched off and
the key removed.
3. Turn off the mains switch. Never
connect or disconnect the charger with
the mains turned on.
4. Connect the charger to the charging
socket on the tiller (see photograph 1)
5. Once the charger is connected, switch
on the mains.
6. The power-on lamp illuminates red
when switched on. The charger lamp
starts yellow and changes to green
when charged. (Charge for the full
duration 8-12 hours).
7. Switch off the mains and remove the
plug from the battery when fully
charged. Do not leave the charger
plugged in with the power off. This
will discharge your battery.
CORRECT CHARGING PROLONGS
BATTERY LIFE.
Battery charger styles can change. If you
are not sure of the charging procedure,
please contact your Service Provider.