713884
14
Verklein
Vergroot
Pagina terug
1/152
Pagina verder
ENGLISH
14 EASY MAX
Rev.B
Übersicht
Übersicht
Übersicht
Übersicht
Folding up (Fig.4.1).
First remove the seat cushion from
the wheelchair and flip up the
(platform) footplate or the individual
footplates. Take hold of the sling
from underneath in the middle and
pull upwards. The wheelchair will
then fold up. To fold your
wheelchair until it is as small as
possible, e.g., to put into a car, you
can remove the footrests
(depending on the model). For this
purpose, open the latch from the
outside and swing the footrest to
the side. Then the footrest only has
to be drawn out of the frame
tubing.
Unfolding (Fig.4.2).
Open the strap on folded frame
prior to unfolding.
Press down on the seat tubing (see picture). Your wheelchair is
then unfolded. Now snap the seat tubing into position in the
seat saddle. This can be facilitated by slightly tipping your
wheel chair. In this way, the weight can be taken off of one rear
wheel so that the wheelchair can be more easily unfolded. Be
careful not to get your fingers caught in the cross-tube
assembly.
Tipping Tubes (Fig.5.1).
Tipping tubes are used by
attendants to tip a wheelchair over
an obstacle. Simply step on the
tube to push a wheel chair, for
example, over a curb or step.
4.0 Handling
Tipping Tubes
Quick-Release Axles for Rear
Wheels (Fig.4.3).
The rear wheels are equipped with
quick-release axles. The wheels
can thus be installed or removed
with out using tools. To remove a
wheel, simply depress the quick-
release button on the axle (1) and
pull it out.
CAUTION!
Hold the quick-release button on the axle depressed when
inserting the axle into the frame to mount the rear wheels.
Release the button to lock the wheel in place. The quick-release
button should snap back to its original position.
Quick-Release Axles for Casters
(Fig.4.4).
Casters can also be equip ped with
quick-release axles (1), which can
then either be installed or removed
without using tools. Only for SA -
Frame version.
Wheel Locks (Fig.5.2-5.5).
Your wheelchair is equipped with two
wheel locks. They are applied directly
against the tires. To engage, press both
wheel-lock levers forward against the
stops (Fig.5.2 and 5.4). To release the
wheel, pull the levers back to their
original posit ions.
Braking power will decrease with:
Worn tire tread
Tire pressure that is too low
Wet tires
Improperly adjusted wheel locks.
The wheel locks have not been designed
to be used as brakes for a moving
wheelchair. The wheel locks should
therefore never be used to brake a
moving wheelchair. Always use the
handrims for brak ing. Make sure that the
interval between the tires and wheel
locks complies with given specifications
(Fig.5.4 and 5.5). To readjust, loosen
screw (1) and set the appro priate
interval. Tighten screw (see the page on
torque).
CAUTION!
After each adjustment of the rear
wheels, check the interval to the wheel
locks and readjust if necessary.
Wheel Locks
5.0 Options
Fig.4.1
Fig.4.2
1
Fig.4.3
1
Fig.4.4
Fig.5.1
Knee-lever brake
Fig.5.2
3 mm
Knee-lever brake
1
Fig.5.3
Standard brake
Fig.5.4
1
Standard brake
12mm with solid tyres
14mm with pneumatic
tyres
Fig.5.5
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Quickie Easy Max bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Quickie Easy Max in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Fins als bijlage per email.

De handleiding is 4,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info