698700
8
Verklein
Vergroot
Pagina terug
1/25
Pagina verder
14
EN
15
SETTINGS
Radio link
At the “SummitTX” tab you will find the settings for the radio connection between the loudspeakers. If “0”
is displayed under “Speakers”, click on “Update Speaker Info.
With “Full Scan” the master speaker searches for the slave. After a short moment, the speakers
automatically got connected to each other. Press “Save Speaker Configuration” to save the connection.
With “Reset Speaker Configuration” you reset the stored radio connection.
Power Management / Standby
You can select how fast you want the speakers to turn into standby mode.
The “Standby Timeout when playing” option allows to set the time the speaker should turn into standbye
mode while the music is still playing. Similar to a sleep timer on TVs.
Factory settings
You can reset the speakers to their factory defaults. All settings done will be deleted. This function can be
found in the “Settings” menu at “Reset device”, press “Confirm reset” to confirm. Resetting process may
take 1-2 minutes. The master loudspeaker must then be newly integrated into the network.
FIRMWARE UPDATE
At “Settings”, go to “Firmware update”, then select “Check for update”. If the speaker finds a new update on the
server, the update will be downloaded and installed.
Do not switch off the device during the update!
Note: For the update process, the speaker must be connected to the Internet.
Manual firmware update via computer (recommended)
1. Enter the IP address of the speaker in the browser of your computer.
The IP address can be found in the AURUM Player App on the main page.
2. Go to the “Device Settings” tab, at “Firmware Update” file you can select the file from your
computer. The update process may take a few minutes.
Manual firmware update via USB stick
1. Download the firmware file from the website “www.quadral.com/downloads”.
2. Load the file onto an empty USB stick (the USB stick should be FAT32 formatted).
3. Turn off the standby master speaker at the power switch.
4. Connect the USB stick to the USB port of the master speaker.
5. Press and hold the WPS/Update button
6. Switch on the power switch again.
7. Press and hold the WPS/Update button for 10 seconds.
8. As soon as the update LED lights up, the update is ready.
Restart streaming module
The button (9) “Reset Streaming Module” is located on the back of the master loudspeaker. Pressing this
button restarts the streaming module. This is only necessary if you have connection problems or if the
device does not respond correctly to the app.
TROUBLESHOOTING
The speakers are not recognized in the LAN network:
- Check whether DHCP is enabled in the settings of your router.
The loudspeakers are not detected in the WLAN network:
- Check that your wireless network is working properly.
- Make sure your speakers are close enough to your wireless router.
- Restart the speakers.
- Connect speakers to the network using a network cable.
- Reset to factory settings.
- Repeaters may interfere with the connection.
Music is only played through one speaker:
- Turn the speakers off and on again. Activate standby mode first.
The speakers no longer sound:
- Check the status „DIRAC On/Off”.
- Check whether the selected signal source provides a high-quality audio signal.
- Repeat the DIRAC Live® measurement and change the microphone position.
App problems:
- Make sure your smartphone operating system is up-to-date.
- Restart speakers and smartphone / tablet
Hard disk is not running:
- The hard disk may need an extra power supply.
- Make sure the drive is FAT32 formatted.
- Check the USB connection: cable inserted correctly? Cable technically OK?
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Quadral AURUM active bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Quadral AURUM active in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 0,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info