815524
18
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
18 7027-802M 04/23
C. General Maintenance and Cleaning
1. Types of Fuel
The type of fuel you are burning will dictate how often you
have to clean your re pot.
If the fuel you are burning has a high dirt or ash content, it
may be necessary to clean the re pot more than once a
day.
Dirty fuel will cause clinkers to form in the repot
(Figure 18.1). A clinker is formed when dirt, ash or a
non-burnable substance is heated to 2000°F (1093°C)
and becomes glass-like. See High Ash Fuel Content
Maintenance on page 22 for more details on di󰀨erent types
of fuels.
Back side of Firepot
Firepot floor left open
Figure 18.2
Clinker
Figure 18.1
NOTE: If you are just cleaning the re pot, there is no
need to unplug the insert.
3. Ash Removal from Firebox
• Frequency: Every 5 bags or weekly or more frequently
depending on ash build-up.
• By: Homeowner
a. There must not be any hot ashes in the rebox during
cleaning so allow the appliance to completely cool.
The rebox ash should be removed every time the
exhaust path is cleaned. Frequent cleaning of the
ash in the rebox will help slow down the build-up of
ash in the exhaust blower and vent system.
b. Plug in your appliance, if unplugged, and turn the
thermostat on and immediately shut it o󰀨 to start the
exhaust blower on its cycle time. It will pull y ash out
the exhaust instead of into the room.
c. Open door. Remove ash with an ash vacuum or whisk
broom and small dust pan.
d. This ash is deposited in the same ash pan as the re
pot debris. The ash pan should be emptied every time
you clean the rebox. Remember to place the ash
and debris into a metal or noncombustible container.
e. The cleaning rods must be fully closed when cleaning
is complete; see Disposal of Ashes on page 19.
4. Cleaning Ash Pan
• Frequency: Weekly or every 5 bags of fuel
• By: Homeowner
Empty into a non-combustible container and re-install ash
pan; see Disposal of Ashes on page 19.
b. Pull re pot cleaning rod OUT a couple of times to
help shake debris loose. If rod is hard to pull, it may
be necessary to use your re pot clean-out tool to
chip away material that has built up on the bottom
plate of the re pot and to push out any clinkers.
Larger clinkers may have to be removed from the top
of the re pot.
c. The re pot oor plate must be fully closed when
nished (Figure 18.2).
2. Cleaning Fire pot with Cleaning Rod & Fire pot
Scraper
• Frequency: Daily or more often as needed
• By: Homeowner
a. The appliance must be in complete shutdown and
cool and the exhaust blower o󰀨.
WARNING
Fire Risk
NEVER pull re pot cleaning rod or
cleaning slide plates out when appliance
is operating.
The cleaning slide plates must be fully
CLOSED when appliance is operating.
Hot pellets may fall into ash pan and start a re or
mis-starts due to lack of vacuum.
Fire Risk
The cleaning slide plates must be fully
CLOSED when appliance is operating.
Hot pellets may fall into ash pan and start
a re.
WARNING
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Quadra-Fire Classic Bay 1200 Pellet bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Quadra-Fire Classic Bay 1200 Pellet in de taal/talen: Engels als bijlage per email.

De handleiding is 5.89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Quadra-Fire Classic Bay 1200 Pellet

Quadra-Fire Classic Bay 1200 Pellet Gebruiksaanwijzing - Français - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info