12
Changing the duration that the backlight is illuminated
1. Press the
Menu
button and turn and press the Select dial to choose ‘
DISPLAY
’.
2. Turn and press the
Select
dial to choose ‘
BACKLIGHT
’.
3. Turn and press the
Select
dial to adjust the duration the backlight is illuminated for when Evoke’s display is ‘
ACTIVE
‘ or in
‘
STANDBY
’.
4. Turn and press the
Select
dial to select ‘
DURATION
’.
5. Turn and press the
Select
dial to choose one of the following option
s:
ON: The backlight will always be illuminated at your preferred brightness level.
TIMED: The backlight will always be illuminated at your preferred brightness level when a button is pressed and then
switch off after 7 seconds of inactivity.
Changing the information shown on the display
1. Press the Menu button and turn and press the Select dial to choose ‘DISPLAY’.
2. Press Menu and turn and press the Select dial to choose ‘INFORMATION’.
3. Turn and press the Select dial to choose one of the following options:
TEXT: Provided by the broadcaster.
STRENGTH: The clear block indicates signal strength for reliable reception.
DATE: Displays the current date.
QUALITY: (Digital radio only) Signal quality, from ‘0’ (low) to ‘100’ (high).
Changing the time format
1. Press the Menu button and turn and press the Select dial to choose ‘CLOCK’.
2. Turn and press the Select dial to choose ‘12/24 HOUR’. Repeat to set the required time format.
Changing the date format
1. Press the Menu button and turn and press the Select dial to choose ‘CLOCK’.
2. Turn and press the Select dial to choose ‘FORMAT’. Repeat to set the required date format.
Clock settings
Setting the time and date
The time and date on Evoke are automatically set by the FM or digital radio signal. If the time/date does not update automatically,
you can manually set it using this option.
Note:
Any time or date updates received by an FM or a digital broadcast will override manual settings, if clock synchronization is
enabled (see the following page for more information).
Setting the time and date manually
1. Press the Menu button and turn and press the Select dial to choose ‘CLOCK’.
2. Turn and press the Select dial to choose ‘TIME/DATE’.
3. Turn and press the Select dial to set the hour. Repeat to adjust the minutes.
4. Turn and press the Select dial to set the day of the month. Repeat to set the month and year.
