HOW TO CALIBRATE THE TEMPERATURE
Temperature calibration
Temperature readings are affected by your body temperature or direct sunlight.
For accurate temperature readings, it is recommended that you set the temperature
reading on the watch to match a known reference temperature before starting
to use the weather function.
When the watch enters the TEMPERATURE SETTING mode, the previously
calibrated offset value will be automatically deleted.
In the WEATHER mode, keep holding down for 2 seconds.
C
“ADJUST HOLD” is shown, and the
watch enters the TEMPERATURE
SETTING mode.
The offset value as "zero" starts
flashing. At the bottom of the display,
the current temperature reading will
be shown.
s
Press to increase the value (+).
Press to decrease the value (-).
D
E
s
C
Press to conrm the temperature calibration.
or
Set the offset value (between -20 and +20) to compensate for the
difference between the currennt temperature reading and the reference
temperature.
Offset value
Current temperature reading
s