572628
8
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
При использовании прицела в условиях повышенной освещенности
(раннее утреннее или позднее вечернее время), нельзя оставлять
включенный прицел с открытой крышкой в неподвижном состоянии
более 30 мин.
При наблюдении статических ярких объектов это может привести к
выгоранию люминофора ЭОП и появлению в поле зрения темных пятен.
Храните прицел с надетой на объектив светозащитной крышкой и в
чехле.
Не забудьте выключить прибор после использования!
Прицел имеет повышенную степень защиты от попадания влаги IPX6 и
может эксплуатироваться при атмосферных осадках любой
интенсивности. Прицел не предназначен для погружения в воду.
Ремонтировать и разбирать гарантийный прицел запрещается!
Наружную чистку оптических деталей производите очень аккуратно и
только в случае явной необходимости. Вначале осторожно удалите
(смахните или сдуйте) с оптической поверхности пыль и песок, после
осуществляйте чистку. Пользуйтесь чистой хлопчатобумажной
салфеткой (ватой и деревянной палочкой), специальными средствами
для линз с многослойными покрытиями или спиртом. Не лейте жидкость
прямо на линзу!
Прицел может эксплуатироваться в широком диапазоне температур - от
минус 30 °С до плюс 40 °С. Однако, если прицел внесен с холода в теплое
помещение, изображение может быть несколько мутным в связи с
образованием конденсата.
Если Вам не удалось легко и надежно (без люфта, строго вдоль линии
ствола) установить прицел на ружье или у Вас имеются сомнения в
правильности крепежа - обязательно обратитесь в специализированную
оружейную мастерскую. Стрельба с неправильно установленным
прицелом снижает точность попадания в цель!
Для обеспечения безотказности работы, предупреждения и устранения
причин, вызывающих преждевременный износ или выход из строя узлов
и деталей, необходимо своевременно проводить технический осмотр и
обслуживание прицела.
Observe the object through the scope and turn the diopter focus knob (7) until
the image appears crisp.
If necessary, turn on the IR illuminator by turning the selector switch (3) to
“IR” position. To mount the IR Illuminator, unscrew and remove the plug (12)
and screw the IR clockwise.
Turn the knob of the IR illuminator (8) until you get a focused IR spot.
After making these adjustments, no further tuning of the diopter is required,
regardless of distance or other factors; perfect the image quality using only
the knob for the objective lens (6) and that for the IR illuminator (8).
When finished, turn off the riflescope by turning the selector switch (3) to the
“OFF” position and replace the objective lens cap (2).
It is possible to mount the scope onto the firearm using a special bracket (9);
after the initial mounting is performed, it is important to follow further
mounting instructions in the section entitled “SIGHTING IN THE
PHANTOM”.
The riflescope can be turned on instantaneously with either the remote
control housed in its bracket (10) or by button (11).
SIGHTING IN THE PHANTOM
Mount the rifle with the scope installed on a bench rest.
Make sure that no sources of light are visible through the scope's field of vision.
Set a target at a distance of about 100m; the light levels around the target should
not exceed 1 lux.
Remove the objective lens cap (2), by sliding it up on top of the objective lens.
Turn on the scope by turning the selector switch (3) to the “ON” position.
Aim the firearm at the target using the mechanical sight.
Adjust the scope according to the steps in the section entitled “OPERATING
THE PHANTOM”.
Turn the objective lens focusing knob (6) until you get a crisp image of the target.
Set the desired reticle brightness level by turning knob (4).
If the center of the reticle crosshairs and the target center do not line up, remove
the covers protecting the windage / elevation adjustment knobs.
Using live ammunition, take 3 or 4 control shots, continually aiming at the same
hit point on the target (you may also use a laser bore sighter and align the laser
point to the center of the cross hairs).
Examine the target and determine if the aiming point coincides with point of
impact, if you determine it's necessary to make corrections, you will need to
adjust your aiming point. To move it downwards and to the left, turn the knob (13)
counterclockwise, in the directions Down and Left respectively, the aiming poin
moves upwards and to the right; keep in mind that one click of the knob
corresponds to a 16.5/13.5 mm (Phantom 3x50/4x60) shift of the hit point at a
distance of 100m.
Check the accuracy of your adjustments by firing another 3 or 4 control shots.
The scope should now be zeroed-in for the specified distance.
Sighting in of the scope should be done at operating temperatures, by following
the order of these steps:
6
55
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pulsar Phantom bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pulsar Phantom in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info