572615
9
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
30
7
TROUBLESHOOTING
The scope will not turn on.
Check that the battery is installed properly. Install the battery according to
the (+) and (-) polarity, ensuring that the markings on the battery and
battery compartment correspond with one another. Check the battery
contact to ensure it is clean and free of corrosion; if necessary, clean the
contact. Also check that the cap of the battery department is fully closed,
otherwise the device will not operate. If necessary, replace the battery as
it may be depleted. Also be sure that the switch has been turned to the
“ON” position.
Distinct black dots appear on the screen.
These dots are cosmetic blemishes resulting from tube production
processes and do not interfere with the reliability or performance of the
scope and are not a defect.
The monocular flickers, flashes or “snows”.
The scope may slightly flicker if when operating in a dark environment the
device is subjected to spot side flash (caused by a narrow-beamed IR
Illuminator). Pulsation stops if the source of flash is eliminated.
The scope may “snow” if operated in complete darkness.
The image is not focused.
Adjust the focus of the eyepiece and the objective (see “Use and
Testing” section). Check that the lenses are not foggy or dusty; if they
are, carefully clean the external surfaces of lenses with a soft cotton
fabric. Replace the battery if the total battery charge is less than 2.2V.
When the unit is brought into a warm environment from a cold one,
condensation may appear on the internal lenses; you must wait two hours
before using the unit.
Visibility decreases or disappears.
Bright light sources, such as headlights, may cause visibility to decrease
or disappear and the image to flicker. Turn the power off and turn the
scope away from the light source; visibility will restore itself immediately.
If you operate the unit in a light environment without the lens cap, the
image turns dark. However if you move into a dark environment visibility
restores itself.
Pulire le lenti con detergente specifico per ottiche con trattamenti
multipli.
Togliere la polvere o lo sporco dalle lenti usando aria compressa,
secca.
Pulire il corpo dell’ con uno straccio morbido e pulito.Challenger
MANUTENZIONE
ATTENZIONE!
Il vostro visore può essere utilizzato in ambienti Challenger
estremamente freddi. Tuttavia, quando l'apparecchio e riportato in
ambienti caldi, occorre aspettare approssimativamente 2-3 ore prima di
riutilizzarlo. Il non rispetto di questa avvertenza può causare il
danneggiamento del visore causato dalla condensa accumulata nei
circuiti interni del visore.
Conservare sempre il ed il suo caschetto nella custodia, in Challenger
un luogo asciutto e ben ventilato, lontano da fonti di calore o da
condizionatori d'aria. Togliere le batterie qualora si preveda un tempo di
inutilizzo superiore a due mesi.
CONSERVAZIONE
Per accendere l'illuminatore IR incorporato (4), levare e ruotare
l'interruttore (3) in posizione “IR” (in G2+ у G3). In GS ruotare
l'interruttore in posizione “IR”.
Puntare l'apparecchio acceso verso un oggetto ad una distanza di
circa 10 - 100m. Ruotare l'oculare (5), mettere a fuoco sullo schermo
del tubo - e visibile una superficie irregolare o dei piccoli punti neri.
Ruotare la lente frontale finche la qualità dell'immagine e
soddisfacente. Correggere la messa a fuoco dell'oculare, se
necessario. Dopo questa regolazione potrebbe non essere
necessario ruotare l'oculare al variare della distanza.
Puntare il Challenger su un oggetto e regolare la messa a fuoco
finale, ruotando la lente frontale fino ad ottenere una immagine nitida.
Ruotando la lente dell'obiettivo verso il corpo si mettono a fuoco
oggetti lontani, ruotandola in direzione opposta si mettono a fuoco
oggetti più vicini.
Il Challenger può essere utilizzato anche con il caschetto (incluso
nella confezione di Head Mount Kit. Per usare questo accessorio,
fissare il Challenger al caschetto utilizzando la vite del caschetto
stesso (vedi figura) e regolare l'apparecchio come sopra descritto. È
possibile vedere con l'occhio sinistro o il destro, scegliendo l'attacco
da 1/4” appropriato e regolare l'adattatore sul lato desiderato. Ulteriori
informazioni riguardo l'uso del caschetto sono presenti nel suo
manuale d'uso.
Dopo l'uso, riposizionare il coprilente e spegnere l'apparecchio
levando e ruotando l'interruttore (3) verso la posizione iniziale “OFF”.
Riporre l'apparecchio nella sua custodia.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pulsar Challenger G3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pulsar Challenger G3 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info