782252
10
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
Translation of the Original Operating
Instructions MICRO Profiling device
MP 400
Dear Customer,
The use of these instructions
makes it easier to become acquainted with the
device,
prevents malfunctions due to improper han-
dling, and
increases the service life of your device.
Always keep these instructions close to hand.
Only operate this device with exact knowledge
of it and comply with the instructions.
PROXXON will not be liable for the safe function
of the device for:
handling that does not comply with the usual
intended use,
other application uses that are not stated in the
instructions,
disregard of the safety regulations,
You will not have any warranty claims for:
operating errors,
lack of maintenance.
For your safety, please comply with the safety
regulations without fail.
Only use original PROXXON spare parts. All
rights reserved for further developments in the
course of technical progress. We wish you much
success with the device.
Safety regulations:
Wear personal protective equipment and al-
ways wear protective goggles.
Depending on the type and use of the electrical
device, wear personal protective equipment
such as a dust mask, non-slip safety shoes, a
helmet or hearing protection to reduce the risk of
injuries. Wear a breathing mask if the work you
do generates dust.
If dust extractors and collectors can be in-
stalled, then ensure that these are connected
and used correctly.
The use of these devices reduces the hazards
that dust poses.
General view (fig. 1):
1. Housing
2. Table
3. Limit stop
4. Hand wheel for profiling height adjustment
5. On-off switch
6. Locking screw for limit stop
7. Guard
8. Locking screw for tool protection
9. Profiler
10. Fastening bores
11.Suction connection
12. Spanner holder
13. Angle stop
14. Mains cable
Description of the machine:
For profiling, slotting, chamfering, trimming, sep-
arating, etc. Your MP 400 enables, e.g., precise
machining of sides and long sections such as for
doors, flaps and housing parts.
The profiling tool is height-adjustable:
On a dovetail guide, the carriage with the drive
unit can be set precisely with the help of the
scaled hand wheel (one revolution is a 1 mm
height difference, i.e., one scale graduation line
is 0.05 mm). While working, this helps you to
slowly and very accurately “feel” your way to-
wards the required profile depth as needed. The
spindle is manufactured precisely and has a
double ball bearing.
The see-through guard can be adjusted in
height, thus making it possible to adjust it to the
work piece thickness; it also functions as a hold-
down.
Additional flexibility is offered by an angle stop
and a longitudinal stop. This can be used on ei-
ther side of the profiling tool on the work table.
This makes it possible to machine a large width
area of the work piece. Also ideal for broader
strips or boards.
- 10 -
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Proxxon MP 400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Proxxon MP 400 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Turks, Deens, Zweeds als bijlage per email.

De handleiding is 2.88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info