490689
19
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
19
Connecting electrical appliances
To comply with regulations, only approved dust
producing tools should be connected. The maximum
power consumption of the connected power tool is
stated in section “Technical data”.
1. Ensure that the electrical appliance is
switched off.
2. Connect the electrical appliance to the appliance
socket on the control panel.
Switching on the vacuum cleaner
Switch position MAN
1. Turn the switch
to position MAN.
The vacuum
cleaner motor
starts.
VCP 700 E-M
The hose diameter and the setting for the suction
hose diameter must be the same.
Hose Hose diameter setting
27 27
32 32
36 36
50 50
Switch position AUTO
Before switching
the switch to posi-
tion AUTO, ensure
that the tool
connected to the
appliance socket is
switched off.
1. Turn the switch
to position
AUTO. The
vacuum cleaner
motor starts
when the connected appliance is switched on.
2. When the power tool is switched off the vacuum
cleaner continues to run for a short moment so
that any dust in the suction hose is conveyed to
the safety filter bag.
VCP 700 E-M
The hose diameter and the setting for the suction
hose diameter must be the same.
Hose Hose diameter setting
27 27
32 32
36 36
50 50
Suction power control
The motor speed
and the suction
power can be
varied with the suc-
tion power control.
This allows precise
adaptation of the
suction power for
different cleaning
tasks.
Check volume flow monitor
Before picking up dust with maximum room
concentration values:
1. Check that all the filters are present and properly
fitted.
2. When the motor is running, hold the suction hose
shut. An acoustic warning sounds after approx.
1 second.
Acoustic warning (VCP 700 E-M only)
For safety reasons, an acoustic warning sounds if
the air speed in the suction hose drops to below
20 m/s. See section “Troubleshooting”.
Cleaning the filter element
To ensure that suction performance is always at its
best, the filter element is automatically cleaned
during operation.
We recommend complete cleaning if the filter ele-
ment becomes extremely dirty.
After picking up harmless dust using the waste bag.
1. Switch off the vacuum cleaner
2. Close the nozzles or suction hose opening with
the palm of your hand.
3. Turn the switch to position MAN and let the
cleaner operate for approx. 10 seconds with the
suction hose opening closed.
10 sec.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Protool VCP700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Protool VCP700 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 20,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info