70266
17
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
17
- Do not damage the mains power cable
(e.g. by driving over, dragging, etc.).
Protect from heat, oil and sharp edges.
Do not pull the plug from the socket by
the cable.
- Check the plug and the cable regularly
and have them replaced by an authorised
service workshop should either become
damaged cable with the type speci ed in
the spare parts list. Always replace the
mains power cable with the type speci ed
in the spare parts list.
- Do not expose the machine to rain.
- The machine should only be used by ap-
pointed persons instructed in correct ma-
chine handling.
- Before use, operators shall be provided
with information, instruction and train-
ing for the use of the machine and the
substances for which it is to be used, in-
cluding the safe method of removal and
disposal of the material collected.
- For reasons of safety, never operate the
machine from an unearthed socket.
- Always use the machine socket for the
purpose speci ed in the manual.
- Always use original PROTOOL accesso-
ries.
- Pull the plug from the socket when the
machine is not in use and prior to main-
tenance and cleaning work.
- Do not lift or transport the machine by
the handle using a crane or lifting gear.
6 Operation
WARNING
Unauthorised voltage or frequency!
Risk of accident
The mains voltage and the frequency of
the power source must correspond with
the speci cations on the machine’s name
plate.
6.1 Initial operation
Open the locking clips [2-2] and remove the
top section of the machine [2-1].
Remove the accessories from the dust con-
tainer [2-3] and the packaging!
Insert the sealing plug [1-15] into the suc-
tion opening [1-1] (for dust class M only).
Insert a lter or disposal bag in the dirt trap
(see chapter 7.6 and 7.7).
Replace the top section [2-1] and close the
locking clips [2-2].
Fit the accessory box to the back of the
vacuum cleaner.
Connect the suction hose to the machine.
Accessory box
Hook the accessory box onto the upper
section [2-1] and fasten in place with two
screws [2-5].
The accessory box is equipped with a pipe
holder which has space for three pipes.
If the pipe holder is not needed, it can be
removed without the use of tools: Lift the
latch, tip the pipe holder backwards and
remove it – see gure [2].
The suction pipe with the oor tool tted
can be easily stored in the groove on the
accessory box. The adapter on the pipe
must be fastened in the correct position
– see gure [2].
6.2 Switch on/off
Insert the plug into an earthed socket.
WARNING
Risk of injury from tools starting up
unexpectedly
Before setting the switch to the “AUTO” or
“MAN” position, make sure that the con-
nected tool is switched off.
The switch [1-9] serves as an on/off switch.
Switch position “0”
Appliance socket [1-3] is disconnected from
the power, mobile dust extractor is switched
off.
“MAN” switch position
Appliance socket [1-3] is connected to the
power, the mobile dust extractor starts.
“Auto” switch position
Appliance socket [1-3] is connected to the
power, the mobile dust extractor starts
when the connected tool is switched on.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Protool VCP 260 E L bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Protool VCP 260 E L in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 10,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info