490706
10
Verklein
Vergroot
Pagina terug
1/61
Pagina verder
Repairs and servicing
10
Guarantee
Maintenance and care
Noise/vibration information
Storage
Recycling
Product conformity declaration
GB
Saw band teeth side-set
Sharpening of the saw bands
The width of side-set should be 0,15 - 0,3 mm each
side, depending on the blade thickness, type and
moisture contents of the wood, and must not exceed
half of the saw band width even when cutting wet wood.
Only the upper third of the tooth height should be side-
set, absolute maximum is upper half of the tooth height.
If the side set reaches down too much, the teeth are
stressed excessively at their roots from flexing of the
saw band, abnormal strain appears, the teeth roots
become weakest points of the saw band, and cracks
occurs at the roots of the teeth.
Care is to be taken when filing the saw bands manually
that edges of the file are sufficiently rounded, because
files with sharp edges contribute to formation of cracks.
When grinding machines are used for sharpening, care
must be also taken that the roots of teeth get a good
radius. Make sure that too much material is not taken
off at once, otherwise the tooth tips overheat and
become brittle. Coarse grinding wheels must not be
used, as they create rough surface giving rise to
concentration of stress and crack formation therefore.
After their service life is ended, submit the electric tool,
its accessories and packages to a disposal premise to
allow reusing of the raw materials.
To allow material-sorted recycling, all plastic
components are marked with relevant symbols.
Repairs in the warranty and post-warranty periods are
carried out by the servicing workshops listed in the
index of addresses.
The portable band saw requires practically no
maintenance. The saw requires no additional
lubrication. It is advisable to remove accumulated
sawdust and chips regularly.
Noise and vibration levels measured and determined
according to EN 50144.The typical A-weighted noise
levels of the electric tool are:
Sound pressure level: 90 dB(A);
Sound power level: 103 dB(A).
The typical level of hand-arm vibration is less than
2,5 m/s .
2
We guarantee PROTOOL appliances in accordance
with statutory/country-specific regulations (proof of
purchase by invoice or delivery note).
Damage attributable to normal wear and tear, overload
or improper handling will be excluded from the
guarantee.
In case of compliant please send the machine,
undismantled, to your dealer or the Service Centre for
electric power tools.
Packed electric tools may be stored in dry unheated
storerooms with temperatures not dropping below -5°C.
Unpacked electric tools shall be stored only in dry self-
contained storerooms with temperatures not dropping
below +5°C, where sudden temperature changes are
prevented.
We declare with our full responsibility that this product
complies with the requirements of the following
standards and regulations:
EN 50 144-1, EN 55 144-2-14, EN 55 014-1,
EN 55 014-2, EN 61 000-3-2, EN 61 000-3-3
according to the provisions of the directives
89/336/EEC, 98/37/EC.
Use ear protection!
Manfred Kirchner
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Protool SBP 285 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Protool SBP 285 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info