490679
14
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
14
4 Control Elements
[1-1] Switch
[1-2] Arresting lever
[1-3] Suction extension
[1-4] Revolutions regulation wheel
[1-5] Front handle
[1-6] Spindle arresting button
[1-7] Brush tilting segment
[1-8] Brush
[1-9] Handle manual screw
[2-1] Flange
[2-2] Grinding wheel
[2-3] Clamping nut
[2-4] Key
[2-5] Spindle
[3-1] Brush tilting segment
[4-1] Brush
[4-2] Screws with washers
[4-3] Cover
[4-4] Springs
Not all of the accessories illustrated or de-
scribed are included as standard delivery.
5 Notes on Safety
Prevention
DANGER
5.1 General Safety Instructions
- Before using the machine, carefully read
all safety instructions and the Operating
Instructions.
- Keep all of the attached documents and
pass on the documentation if the ma-
chine changes ownership.
5.2 Safety instructions for all
working activities
Safety notices for working activity –
level grinding:
a) This electro-mechanical device is
designed for use as a level grinder.
Read all safety warnings, instruc-
tions, illustrations and speci cations
intended for this electromechanical
tool. Failing to meet all the below speci-
ed instructions may lead to injury by
electric current, re and/or serious in-
jury.
b) This tool is not recommended for
cutting. Execution of works this tool is
not designed for may create a risk and
cause injury of a person.
c) Do not use accessories which is not
explicitly designed and recommended
by the tool manufacturer. The fact that
the accessories an be attached to your tool
does not guarantee its safe operation.
d) Nominal rpm of accessories must be
at least equal to the maximum rpm,
stated on the tool. Accessories that op-
erate at higher rpm than are the nominal
rpm, may break and pull apart.
e) Outer diameter and thickness of your
accessories must be within the limits
of nominal range for your electrome-
chanical tool. Accessories of incorrect
dimensions cannot be either protected
enough or controlled properly.
f) Clamping dimensions of disks, anges,
supporting plates or any other acces-
sories must be suitable for xing to
the tool spindle. Accessories with clamp-
ing holes which do not correspond with the
mounting dimensions of electromechani-
cal tool will be unbalanced, may vibrate
excessively and cause loss of control.
g) Do not use damaged accessories.
Check the accessories prior to each
use: check the grinding wheels for
chips and cracks, check the support-
ing plates for cracks, ripping or exces-
sive wear, check the wire brushes for
loose or cracked wires. If accessories
or tool fell down, check the damage or
mount undamaged accessories. After
the accessories is checked and mount-
ed, you and also bystanders stand to
be beyond the level of rotating ac-
cessories and leave the tools run free
at highest rpm for one minute. During
this trial time damaged accessories usu-
ally rips apart or disintegrates.
h) Use personal protective means. De-
pending on use, use facial shield and
safety protective goggles. If appro-
priate, use dust mask, ear protec-
tors, gloves and work apron, capa-
ble of capturing small fragments of
abrasive material or workpiece. Eye
protection must be capable of capturing
fragment impact created during various
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Protool RGP130 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Protool RGP130 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 8,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info