490612
12
Verklein
Vergroot
Pagina terug
1/87
Pagina verder
12
PDC 18-4 Compact
GB
7 Settings
7.1 Changing direction of rotation
[1-7]
Switch to the left = clockwise rotation
Switch to the right = counterclockwise ro-
tation
7.2 Changing gear
You can change gear using the gear switch
[1-5]
.
7.3 Adjusting the torque[1-6]
Fastening
Select the correct torque setting:
Position 1 = low torque
Position 12 = high torque
An
acoustic signal
sounds when the preset
torque is reached and the machine then
switches off. You must release and press the
ON/OFF switch
[1-8]
again to start the ma-
chine.
Drilling
Mark is aligned with drill symbol = maxi-
mum torque.
7.4 Impact drilling
L
The machine was designed for impact
drilling into tiles, masonry and stone.
Set the selector switch
[1-4]
to the hammer
symbol. Set the adjusting wheel
[1-6]
to the
drill symbol.
7.5 Changing tools
Turn the clamping sleeve
[5-1]
anticlock-
wise to open the jaws. The arrow on the
clamping sleeve indicates the opening direc-
tion. The tool can now be inserted into the
drill chuck.
Turn the clamping sleeve
[5-1]
clockwise to
clamp the tool securely
8 Working with the machine
8.1 On/Off switch [1-8]
Press = ON, release = OFF
L
The speed of the machine depends on
how far the on/off switch is pressed in.
8.2 Bit depot [1-1]
Magnetic, for storing bits and bit holders.
8.3 Belt clip [1-9]
The user can attach the machine to work
clothing for short periods using the belt clip
(right/left).
8.4 Acoustic warning signals
Acoustic warning signals sound and the ma-
chine switches off in the following operating
states:
9 Service and maintenance
Note the following information:
Keep the ventilation slits on the machine
free and clean to ensure adequate cooling.
Keep the contacts on the machine, charger
and battery pack clean.
LED green – lit continu-
ously:
charged > 60 %
LED green – flashing
slowly:
charged 30 % – 60
%
LED green – flashing
quickly:
charged 0 % – 30
%
LED yellow – lit continu-
ously:
battery is empty
LED red – lit continu-
ously:
battery temperature
is outside the permitted
range.
LED red – flashing:
indi-
cates a general fault, e.g.
incomplete contact, short
circuit, battery pack faulty,
etc.
WARNING
Risk of injury
X
Always switch off the machine before ad-
justing settings!
CAUTION
Risk of injury
X
Clamp the tool centrally in the drill chuck!
– Preset torque reached.
"Block protect" - starting torque too
high.
– Machine overloaded
peep
12

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Protool-PDC-18-4-Compact

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Protool PDC 18-4 Compact bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Protool PDC 18-4 Compact in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 18,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info