738849
18
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
MOUNTING THE RADIO RECEIVER
Plug the radio receiver into a mains socket. Then plug
the device to be switched into the socket of the
radio receiver.
NOTE
The radio receiver should not be mounted behind
a metal cover, as this will restrict the range.
ATTENTION!
Always check whether the power consumption
of the connected device does not exceed the
switching capacity.
MOUNTING THE RADIO TRANSMITTER
Remove the battery compartment cover (6) by
pressing lightly and simultaneously pushing in the
direction of the arrow. Insert the battery (CR2032)
into the radio transmitter with the correct polarity
(positive pole upwards) and slide the switch (7) into
position “I” to switch on the radio transmitter. Slide
the battery cover back onto the transmitter housing.
Mount the radio transmitter (2) on the casement
of the window to be monitored. Make sure that
the minimum gap size is taken into account (see
“Minimum width of window opening”).
1. To attach the radio transmitter, you can either use the
two supplied adhesive pads or 2 screws, which are
inserted through the two slots on the radio transmitter
and screwed into the window casement. Before you
screw in the radio transmitter, make sure that the
position of the radio transmitter is correct.
2. Attach the magnet housing (3) to the window frame
behind the radio transmitter so that the distance
between the magnet housing and the arrow mark on
the radio transmitter is not more than 7mm when
the window is closed. The magnet housing can either
be attached to the window frame with the enclosed
adhesive pad or with a screw. To do this, open the
magnet housing by levering out the lower part (3c)
with a suitable screwdriver.
3. If the magnet housing does not fit close enough to
the radio transmitter, you can reduce the distance
using the washers (U) supplied.
4. After the washers and the bottom part of the magnet
housing have been fixed, reinsert the magnet (3b) and
then replace the upper part of the housing (3a). Make
sure that the upper part of the housing engages correctly.
EN
18
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Protector AS-410 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Protector AS-410 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info