702037
13
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
- 12 - TF-108449.1 & TF-108449.2
2) If the unit has already been used, press the on/speed button to resume to work and the settings will be
the same as the last time; except for the function of timer and sleeping mode.
3) If the unit is working, press on/speed button to adjust the speed. It will work as below:
Low → Mid → High → Low … (repeating).
4) After the unit is turned on, the blue LED light on the lower part of the main body will illuminate. If the
unit is turned off, the LED light will go out.
2. MODE: Press the button to choose the mode functions from normal →Breeze Sleeping Normal
(repeating).
1) Normal: under this mode, the motors work with the preset speed and the display of &
are off.
2) Breeze: under this mode, the display of is on and is off. The fan will work from high to low
and repeat automatically. You can press “ON/SPEED” button to choose speed 1 / 2 / 3.
3) Sleeping: under this mode, the display of is off and is on. The speed level (Speed 1 / 2 / 3)
will be automatically changed from high to low and keep working as speed 1 until you manually change
the speed.
(For example: If you choose speed 3, the motor will work as speed 3. After 30 minutes, it will
automatically change to speed 2. After 30 minutes again the motor will change to speed 1 and keep
working as speed 1 unless you manually change the speed.)
3. SWING: Press this button to control the oscillation function on and off. The display of will be on and
off accordingly.
4. TIMER: Press this button to set your desired working time from 0.5h 1h 1.5h 2h 7.5h off
→ 0.5h … (repeating). After the timer is set, the unit will count down with LED display showing the
remaining time (For example, if the timer is set with 2h, after 30 minutes the LED display will show 1.5h.).
After the set time, all timer functions are disabled, the display will be off and the unit will not be working
anymore. The fan is under standby condition now.
5. SHIFT: Press this button to choose any fan blade to work.
1) You set the fan on working status once you press the button the first time. Display of Fan 1, Fan 2 and
Fan 3 will flash 5 seconds in order to select the different fan blades.
2) During the setting status (display of fan blades is flashing), press the button MODE / SWING / TIMER to
choose Fan 1, Fan 2 or Fan 3 to work. When you turn off all the three fans, the unit will also be turned
off and at standby condition.
3) During the setting status (display of fan blades is flashing), press SHIFT button, ON/SPEED button or do
not operate for 5 seconds, the setting status will be closed. The LED display will stop flashing.
6. OFF: Press this button and all functions and the display will be off. The unit will be at standby condition.
AROMA PAD FUNCTION
After inserting the aroma pad into the front fan guard, a flood of fragrance will be spread out in the whole room
once the fan is turned on. Please insert the aroma pad with the pillars buckled into the fan guard.
REMOTE CONTROL
This unit has a remote control. One piece of CR2032 battery will be provided with the unit. The functions of the
remote control buttons are the same as of the buttons on the control panel. You can store the remote control in
the recess provided on the rear panel.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Proklima TF-108449.2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Proklima TF-108449.2 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 2,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info