10
Preparing the vacuum cleaner
for use
The accessories can be connected by pushing
and twisting, and can be disconnected by
pulling them apart and twisting.
Connecting the suction hose and suction
tube.
Join the suction hose handle firmly to the
suction tube.
Connecting the suction tubes
Join the two tubes.
Adjust the Telescopic Tube (depending on
model)
Attaching the suction hose
Insert the suction hose connector in the
suction inlet. It locks in place and can be
rotated all the way around.
Press the release button and pull out the
connector in order to remove the suction hose.
Mains connection/Cable rewind
The mains cable is in the cable compartment.
Pull out the cable and insert the plug into the
mains socket. Remove plug from the mains
socket. Press the foot button; the cable
rewinds automatically when vacuuming has
been completed.
Using the nozzles
Using the floor nozzle*
For the daily care of carpets and hard floors.
Without being changed over manually, the floor
nozzle is entirely suited for daily vacuuming of
carpets and hard floor surfaces such as
parquet, tiles, linoleum, etc.
