HOW TO USE
INCOMING CALL:
Lift the handset and start the conver-
sation.
OUTGOING CALL:
Lift the handset. Wait for the dial tone
and key-in the desired telephone
number. Replace the handset when
the conversation is over.
REDIAL:
In case the person you were calling
was busy or you want to dial the last
dialed number again, this number is
stored in memory:
1. pick up the handset and wait for
the dialtone
2. press the button REDIAL; the last
dialed number will be redialed
This number can be as long as 31
digits.
PAUSE:
In case you are using a PABX system
and you must dial a prefix number (0
or 9) to get an outside line, it is
recommendable to insert a pause by
pressing the button PAUSE after the
cited prefix. This to prevent that redia-
ling the number will go too fast.
CALL TRANSFER AND NETWORK
SERVICES:
Use the R/FLASH-key to activate
special services from your telephone-
company or to transfer a call in case
you are connected through a PABX.
The FLASH time of this feature is
100mS.
TELESERVICES:
The buttons
∗∗
and # are functionbut-
tons, needed for divers telecom-servi-
ces (teleshopping, telebanking, etc) or
to control divers telecom devices
(PABX, answering machines, etc).
Refer to the concerning manual.
MUTE:
Press MUTE to temporary switch-OFF
the handsets microphone; press again
to continue the conversation.
RECEIVING VOLUME:
With the RECEIVER H-N switch you
can select the receivers volume.
Position H = HI volume, position N =
normal volume.
9
